PC Review


Reply
Thread Tools Rate Thread

Boot problems: no peripherals the first time

 
 
Michael Ray Brown
Guest
Posts: n/a
 
      8th Nov 2007
Whenever I start up my computer, the monitor and onboard sound fail to work.
If I turn off the computer, and then turn it back on again, it starts up
correctly the second time.

It's as if the peripherals aren't engaged the first time it boots. What
could be causing this? And is there anything I can do to fix it?

This is an AMD 60 3200+ system (Compaq Presario S6900NX) running XP Home
with 1 GB of RAM.

--
Michael


 
Reply With Quote
 
 
 
 
Malke
Guest
Posts: n/a
 
      8th Nov 2007
Michael Ray Brown wrote:
> Whenever I start up my computer, the monitor and onboard sound fail to work.
> If I turn off the computer, and then turn it back on again, it starts up
> correctly the second time.
>
> It's as if the peripherals aren't engaged the first time it boots. What
> could be causing this? And is there anything I can do to fix it?
>
> This is an AMD 60 3200+ system (Compaq Presario S6900NX) running XP Home
> with 1 GB of RAM.
>


Possibly your power supply is failing. Or it could be your motherboard.
I'd start with the power supply because that is easy and cheap to
replace (if you have a desktop).

http://www.elephantboycomputers.com/...ardware_Tshoot


Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
 
Reply With Quote
 
Michael Ray Brown
Guest
Posts: n/a
 
      9th Nov 2007
"Malke" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Michael Ray Brown wrote:
>> Whenever I start up my computer, the monitor and onboard sound fail to
>> work. If I turn off the computer, and then turn it back on again, it
>> starts up correctly the second time.

>
> Possibly your power supply is failing. Or it could be your motherboard.
> I'd start with the power supply because that is easy and cheap to replace
> (if you have a desktop).
>
> http://www.elephantboycomputers.com/...ardware_Tshoot
>

Thanks for your advice. The power supply is only two years old, and it's
one of the best. I do have my suspicions about the motherboard because this
system has always behaved oddly, but it passes every test I do (using HP's
own PC-Doctor).

--
Michael


 
Reply With Quote
 
Malke
Guest
Posts: n/a
 
      9th Nov 2007
Michael Ray Brown wrote:
> "Malke" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Michael Ray Brown wrote:
>>> Whenever I start up my computer, the monitor and onboard sound fail to
>>> work. If I turn off the computer, and then turn it back on again, it
>>> starts up correctly the second time.

>> Possibly your power supply is failing. Or it could be your motherboard.
>> I'd start with the power supply because that is easy and cheap to replace
>> (if you have a desktop).
>>
>> http://www.elephantboycomputers.com/...ardware_Tshoot
>>

> Thanks for your advice. The power supply is only two years old, and it's
> one of the best. I do have my suspicions about the motherboard because this
> system has always behaved oddly, but it passes every test I do (using HP's
> own PC-Doctor).
>


The age of the hardware is irrelevant. New hardware can fail just as
easily as old hardware. I wouldn't ignore the psu as a possibility for
the culprit. It is also better to test hardware - like the motherboard -
outside of the operating system. If PC-Doctor does this, fine. If the
tests are run from within Windows, you want to try a different program.


Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
 
Reply With Quote
 
Michael Ray Brown
Guest
Posts: n/a
 
      12th Nov 2007
"Malke" <(E-Mail Removed)> wrote in message
news:uyirk$(E-Mail Removed)...
>>Michael Ray Brown wrote:
>>
>> Thanks for your advice. The power supply is only two years old, and it's
>> one of the best. I do have my suspicions about the motherboard because
>> this system has always behaved oddly, but it passes every test I do
>> (using HP's own PC-Doctor).
>>

>
> The age of the hardware is irrelevant. New hardware can fail just as
> easily as old hardware. I wouldn't ignore the psu as a possibility for the
> culprit. It is also better to test hardware - like the motherboard -
> outside of the operating system. If PC-Doctor does this, fine. If the
> tests are run from within Windows, you want to try a different program.
>
>

Further tests revealed that the floppy drive is defective. Because the
floppy has priority over the hard disk in starting up, I wonder if that
could be causing the problem. I've ordered a replacement floppy, and will
report back.

--
Michael


 
Reply With Quote
 
Unknown
Guest
Posts: n/a
 
      12th Nov 2007
Why not just remove the floppy from the boot selection in your BIOS?
(disconnect the floppy)?
"Michael Ray Brown" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> "Malke" <(E-Mail Removed)> wrote in message
> news:uyirk$(E-Mail Removed)...
>>>Michael Ray Brown wrote:
>>>
>>> Thanks for your advice. The power supply is only two years old, and
>>> it's one of the best. I do have my suspicions about the motherboard
>>> because this system has always behaved oddly, but it passes every test I
>>> do (using HP's own PC-Doctor).
>>>

>>
>> The age of the hardware is irrelevant. New hardware can fail just as
>> easily as old hardware. I wouldn't ignore the psu as a possibility for
>> the culprit. It is also better to test hardware - like the motherboard -
>> outside of the operating system. If PC-Doctor does this, fine. If the
>> tests are run from within Windows, you want to try a different program.
>>
>>

> Further tests revealed that the floppy drive is defective. Because the
> floppy has priority over the hard disk in starting up, I wonder if that
> could be causing the problem. I've ordered a replacement floppy, and will
> report back.
>
> --
> Michael
>



 
Reply With Quote
 
Michael Ray Brown
Guest
Posts: n/a
 
      20th Nov 2007
"Unknown" <(E-Mail Removed)> wrote in message
news:WL1_i.68267$(E-Mail Removed)...
> Why not just remove the floppy from the boot selection in your BIOS?
> (disconnect the floppy)?


Well, I really need a floppy for exchanging files with colleagues. In any
case, I replaced the floppy, but it makes no difference with the boot-up.
The next item on my list is the power supply. Is there a way to test it
before going to the trouble of replacing it?

--
Michael


 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
USE VOIP WITHOUT PERIPHERALS! HalParke Printers 0 7th Feb 2009 10:52 AM
Peripherals+ itsme General 3 17th Feb 2008 07:27 PM
Peripherals not recognized! =?Utf-8?B?TWFyaw==?= Windows XP General 0 9th Jun 2007 08:26 PM
Question...USB peripherals and no boot MAP Windows XP Hardware 3 21st Jul 2005 03:30 AM
Is there another forum for peripherals?? Toby Zidle Windows XP Help 3 31st Aug 2004 02:27 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 11:15 AM.