I have a very tired and slow Windows XP Pro system. I wanted a new clean
system to see if I had hardware or software issues. I picked the original XP
Home that came I am am running a very slow and tired XP Pro system. I wanted
t load awith the system to do the tempary install. My C; (boot drive) and a
data drive are in swappable trays. I do a ghost image once every couple of
weeks and during the remaining time the second trayed drive is a data drive
which get image less often,

I took the backup C:drive image disk and formatted and partitioned it using
theSegate Wizard (Ialso did a format using the disk management program in
Windows. Each time I try to install Windows XP Home it boots from the CD and
the says it is booting windows and then I get the solid blue screen with a
message. This is parts of the long message:

"A problem has detected and Windows has shut down to prevent damgage to your
computer,"

Tecnical info:
*** Stop: 0xF70000007B (0XF7C7A524, 0X00000034, 0X00000000,0X00000000)

The disk I am using to install the Windows system on was a perfectly good
boot disk with windows xp pro on it before I partitioned and formatted it.
If any one can shed some light on this I would appreciate it.

Ralph

Is this the actual error - or is there a typo?: Stop: 0xF70000007B

Link to the 7B error: http://aumha.org/win5/kbestop.php#0x7b
Hard drive problems (not necessarily a bad hard drive, but it's possible)

- John

"chevysix" wrote:

> I have a very tired and slow Windows XP Pro system. I wanted a new clean
> system to see if I had hardware or software issues. I picked the original XP
> Home that came I am am running a very slow and tired XP Pro system. I wanted
> t load awith the system to do the tempary install. My C; (boot drive) and a
> data drive are in swappable trays. I do a ghost image once every couple of
> weeks and during the remaining time the second trayed drive is a data drive
> which get image less often,
>
> I took the backup C:drive image disk and formatted and partitioned it using
> theSegate Wizard (Ialso did a format using the disk management program in
> Windows. Each time I try to install Windows XP Home it boots from the CD and
> the says it is booting windows and then I get the solid blue screen with a
> message. This is parts of the long message:
>
> "A problem has detected and Windows has shut down to prevent damgage to your
> computer,"
>
> Tecnical info:
> *** Stop: 0xF70000007B (0XF7C7A524, 0X00000034, 0X00000000,0X00000000)
>
> The disk I am using to install the Windows system on was a perfectly good
> boot disk with windows xp pro on it before I partitioned and formatted it.
> If any one can shed some light on this I would appreciate it.
>
> Ralph
>
>
>

I am sure that the actual error message was just as shown. It had the item
"Technical info: " *** Stop: 0xF70000007B (0XF7C7A524, 0X00000034,

> > 0X00000000,0X00000000).

If there is any doubt that I might have mis-read the error message I will
try it over later today.

It had several lines above it with info like I showed in the first message.

Thanks for your response.

Ralph

"usasma" <(E-Mail Removed)> wrote in message
news:6E0838E4-7C95-4106-9117-(E-Mail Removed)...
> Is this the actual error - or is there a typo?: Stop: 0xF70000007B
>
> Link to the 7B error: http://aumha.org/win5/kbestop.php#0x7b
> Hard drive problems (not necessarily a bad hard drive, but it's possible)
>
> - John
>
> "chevysix" wrote:
>
>> I have a very tired and slow Windows XP Pro system. I wanted a new
>> clean
>> system to see if I had hardware or software issues. I picked the original
>> XP
>> Home that came I am am running a very slow and tired XP Pro system. I
>> wanted
>> t load awith the system to do the tempary install. My C; (boot drive) and
>> a
>> data drive are in swappable trays. I do a ghost image once every couple
>> of
>> weeks and during the remaining time the second trayed drive is a data
>> drive
>> which get image less often,
>>
>> I took the backup C:drive image disk and formatted and partitioned it
>> using
>> theSegate Wizard (Ialso did a format using the disk management program in
>> Windows. Each time I try to install Windows XP Home it boots from the CD
>> and
>> the says it is booting windows and then I get the solid blue screen with
>> a
>> message. This is parts of the long message:
>>
>> "A problem has detected and Windows has shut down to prevent damgage to
>> your
>> computer,"
>>
>> Tecnical info:
>> *** Stop: 0xF70000007B (0XF7C7A524, 0X00000034, 0X00000000,0X00000000)
>>
>> The disk I am using to install the Windows system on was a perfectly good
>> boot disk with windows xp pro on it before I partitioned and formatted
>> it.
>> If any one can shed some light on this I would appreciate it.
>>
>> Ralph
>>
>>
>>

I should maybe have said this was a SATA drive,. Don't know if that makes a
difference
Ralph
"chevysix" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>I am sure that the actual error message was just as shown. It had the item
>"Technical info: " *** Stop: 0xF70000007B (0XF7C7A524, 0X00000034,
>
>> > 0X00000000,0X00000000).
>
> If there is any doubt that I might have mis-read the error message I will
> try it over later today.
>
> It had several lines above it with info like I showed in the first
> message.
>
> Thanks for your response.
>
> Ralph
>
> "usasma" <(E-Mail Removed)> wrote in message
> news:6E0838E4-7C95-4106-9117-(E-Mail Removed)...
>> Is this the actual error - or is there a typo?: Stop: 0xF70000007B
>>
>> Link to the 7B error: http://aumha.org/win5/kbestop.php#0x7b
>> Hard drive problems (not necessarily a bad hard drive, but it's possible)
>>
>> - John
>>
>> "chevysix" wrote:
>>
>>> I have a very tired and slow Windows XP Pro system. I wanted a new
>>> clean
>>> system to see if I had hardware or software issues. I picked the
>>> original XP
>>> Home that came I am am running a very slow and tired XP Pro system. I
>>> wanted
>>> t load awith the system to do the tempary install. My C; (boot drive)
>>> and a
>>> data drive are in swappable trays. I do a ghost image once every couple
>>> of
>>> weeks and during the remaining time the second trayed drive is a data
>>> drive
>>> which get image less often,
>>>
>>> I took the backup C:drive image disk and formatted and partitioned it
>>> using
>>> theSegate Wizard (Ialso did a format using the disk management program
>>> in
>>> Windows. Each time I try to install Windows XP Home it boots from the CD
>>> and
>>> the says it is booting windows and then I get the solid blue screen with
>>> a
>>> message. This is parts of the long message:
>>>
>>> "A problem has detected and Windows has shut down to prevent damgage to
>>> your
>>> computer,"
>>>
>>> Tecnical info:
>>> *** Stop: 0xF70000007B (0XF7C7A524, 0X00000034, 0X00000000,0X00000000)
>>>
>>> The disk I am using to install the Windows system on was a perfectly
>>> good
>>> boot disk with windows xp pro on it before I partitioned and formatted
>>> it.
>>> If any one can shed some light on this I would appreciate it.
>>>
>>> Ralph
>>>
>>>
>>>
>
>