Can anyone help my pc is displaying a blue screen with an
error saying it has detected a problem and windows has
been shut down to prevent damage this are the error codes
I get Stop 0x 0000ed ....0x823ab030 and oxc000032 can
somebody help me please and thank you

That stop code is UNMOUNTABLE_BOOT_VOLUME. The two parameters you listed
are the device object (used for debugging) and the status code. The status
code (c0000032) is STATUS_DISK_CORRUPT_ERROR and it means Windows thinks
your disk is corrupted. The recommended action is to run chkdsk, but before
you do that, check the cables. Make sure they aren't broken and are seated
properly. I would disconnect both ends, inspect the pins on the drive and
controller, and *carefully* reconnect the cable. Also, the cable should the
80-wire variety... not 40.

- Robert -

"viv" <(E-Mail Removed)> wrote in message
news:1835301c41a09$5f9562b0$(E-Mail Removed)...
> Can anyone help my pc is displaying a blue screen with an
> error saying it has detected a problem and windows has
> been shut down to prevent damage this are the error codes
> I get Stop 0x 0000ed ....0x823ab030 and oxc000032 can
> somebody help me please and thank you

thank you for replying but I have one litle question when
I check the cables they seem to work fine and where do I
get chkdsk since I try using F8 like is saying and
nothing, should I put the cd from windows to get the
computer to run the chkdsk or I have to get the cd from
the supplyer ? thank you
>-----Original Message-----
>That stop code is UNMOUNTABLE_BOOT_VOLUME. The two
parameters you listed
>are the device object (used for debugging) and the
status code. The status
>code (c0000032) is STATUS_DISK_CORRUPT_ERROR and it
means Windows thinks
>your disk is corrupted. The recommended action is to
run chkdsk, but before
>you do that, check the cables. Make sure they aren't
broken and are seated
>properly. I would disconnect both ends, inspect the
pins on the drive and
>controller, and *carefully* reconnect the cable. Also,
the cable should the
>80-wire variety... not 40.
>
>- Robert -
>
>"viv" <(E-Mail Removed)> wrote in
message
>news:1835301c41a09$5f9562b0$(E-Mail Removed)...
>> Can anyone help my pc is displaying a blue screen with
an
>> error saying it has detected a problem and windows has
>> been shut down to prevent damage this are the error
codes
>> I get Stop 0x 0000ed ....0x823ab030 and oxc000032 can
>> somebody help me please and thank you
>
>
>.
>

Chkdsk is one of the commands you access from the Recovery Console. Boot
off of your CD and enter "R" when it asks you if you want to use the
recovery console; you'll need the administrator password. Use "chkdsk /?"
to see help info. I think the option is /r to repair a bad file system.
Any files it needs that it cannot find on the drive will be extracted from
the CD.

- Robert -

"viv" <(E-Mail Removed)> wrote in message
news:17fc701c41a6f$c4422de0$(E-Mail Removed)...
> thank you for replying but I have one litle question when
> I check the cables they seem to work fine and where do I
> get chkdsk since I try using F8 like is saying and
> nothing, should I put the cd from windows to get the
> computer to run the chkdsk or I have to get the cd from
> the supplyer ? thank you
>>-----Original Message-----
>>That stop code is UNMOUNTABLE_BOOT_VOLUME. The two
> parameters you listed
>>are the device object (used for debugging) and the
> status code. The status
>>code (c0000032) is STATUS_DISK_CORRUPT_ERROR and it
> means Windows thinks
>>your disk is corrupted. The recommended action is to
> run chkdsk, but before
>>you do that, check the cables. Make sure they aren't
> broken and are seated
>>properly. I would disconnect both ends, inspect the
> pins on the drive and
>>controller, and *carefully* reconnect the cable. Also,
> the cable should the
>>80-wire variety... not 40.
>>
>>- Robert -
>>
>>"viv" <(E-Mail Removed)> wrote in
> message
>>news:1835301c41a09$5f9562b0$(E-Mail Removed)...
>>> Can anyone help my pc is displaying a blue screen with
> an
>>> error saying it has detected a problem and windows has
>>> been shut down to prevent damage this are the error
> codes
>>> I get Stop 0x 0000ed ....0x823ab030 and oxc000032 can
>>> somebody help me please and thank you
>>
>>
>>.
>>