Please post a complete copy of the Stop Error Report.
Disable automatic restart on system failure. This should help by
allowing time to write down the STOP code properly. Right click on
the My Computer icon on the Desktop and select Properties, Advanced,
Start-Up and Recovery, System Failure and uncheck box before
Automatically Restart.
Do not re-enable automatic restart on system failure. Check for variants
of the Stop Error message.
Does the problem occur dring the boot process or after? Does it occur in
Safe Mode?
What is your computer make and model?
syntpco2.dll
http://www.programchecker.com/publisher/229.aspx
omci.sys
http://www.file.net/process/omci.sys.html
They probably have nothing to do with the problem.
What errors appear in Event Viewer?
Please post copies of all Error and Warning Reports appearing in the
System and Application logs in Event Viewer relating to the last boot in
normal mode . No Information Reports or Duplicates please. Indicate
which also appear in a previous boot.
You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer. When researching the meaning
of the error, information regarding Event ID, Source and Description
are important.
A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
jc11 wrote:
> I have the exact same issue as Mitchb12 and checked the device
> manager (no yellow question marks) but do have 2 unsigned drivers
> (syntpco2.dll and omci.sys).
>
> Any recommendations on what I should do next?
>
> Thank you.
>
> "Gerry" wrote:
>
>> If you can consistently access in Safe this tends to point to a
>> software driver which loads in normal mode but not safe mode.
>>
>> Background information on Stop Error message 0x8E
>> http://msdn2.microsoft.com/en-us/library/ms794023.aspx
>>
>> 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED
>> A kernel mode program generated an exception which the error handler
>> didn't catch. These are nearly always hardware compatibility issues
>> (which sometimes means a driver issue or a need for a BIOS upgrade).
>> Source: http://aumha.org/a/stop.htm
>>
>> Are there any yellow question marks in Device Manager? Right click on
>> the My Computer icon on your Desktop and select Properties,
>> Hardware,Device Manager. If yes what is the Device Error code?
>>
>> Try Start, Run, type "sigverif.exe" without quotes and hit OK. What
>> drivers are listed as unsigned? Disregard those which are not
>> checked.
>>
>>
>> --
>>
>>
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~
>> FCA
>> Stourport, England
>> Enquire, plan and execute
>> ~~~~~~~~~~~~~~~~~~~
>>
>> Mitchb12 wrote:
>>> I'm running Windows XP SP2
>>> Sometimes the computer runs for awile other times almost immediately
>>> I get a blue screen with:
>>>
>>> Tech Information
>>>
>>> *** STOP: 0x0000008E (0xc0000005, ox82117731, 0xF8ADAC3C,
>>> 0x00000000) Begining dump of physical memory
>>> Physical Memory dump complete
>>> Contact your system administrator or tech support group for furthur
>>> assisatnce.
>>>
>>> I've done a windows restore back as far as possible.
>>> I've gone into msconfig and unselected all the startup items.
>>> I've gone into devmgmt.msc and disabled the display and network
>>> adaptors.
>>>
>>> The computer will work in Safe Mode, but if I go into any other mode
>>> such as Safe Mode with Networking I get the blue screen.
>>>
>>> Any thoughts on what to do next?
Similar Threads
