[aditya_sinha2388]

A problem has been detected and windows has been shut down to prevent damage
to your computer.


If this the first time you've seen this stop error screen, restart your
compute. If this screen appears again, follow these step:

1. Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for
any windows updates you might need.

2. Disable or remove any newly installed hardware or software. Disable BIOS
memory options such as caching or shadowing. If you need to use Safe Mode to
remove or disable components, restart your computer, press F8 to select
Advanced Startup Options, and then select Safe Mode.

Technical Information: Stop error oxooooooED(0x82B2EC30,
0xC000009C,0x00000000, 0x00000000)

[wizkid]

Hi,

This is most likely to be caused by RAM.

have you ran Memtest 86 to see if your memory is ok?


wizkid

[psd99]

take out ram reinsert either in the same slot or different one

[aditya_sinha2388]

I dont know how to run Memtest 86. can u pls tell me abt it.

[wizkid]

http://www.memtest86.com/


ISO images suitable for creating a bootable Memtest86 CD-ROM

Download - Memtest86 v3.4 ISO image (zip

Hope this helps.

[wizkid]

Are you still having problems?

[aditya_sinha2388]

A problem has been detected and windows has been shut down to prevent damage
to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this the first time you've seen this stop error screen, restart your
compute. If this screen appears again, follow these step:

1. Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for
any windows updates you might need.

2. Disable or remove any newly installed hardware or software. Disable BIOS
memory options such as caching or shadowing. If you need to use Safe Mode to
remove or disable components, restart your computer, press F8 to select
Advanced Startup Options, and then select Safe Mode.

Technical Information:
STOP: oxooooooD1 (oxoooooo3, 0x0000005, oxoooooo0, oxF920CD72)

IdechnDR.sys Address F920CD72 base at F9208000, DateStamp 3d99eac3


I has reinseretd RAM even in different slots still problem persists.

[wizkid]

Hi,

This error codes is cased by drivers or hardware have you added any new hardware lately ?

Try reinstalling windows or doing a repair install as well that might help.


wizkid

[aditya_sinha2388]

Hi
i had changed the mouse new optical mouse.
also i had installed antivirus and then removed it from PC

does this cause problem
what to be done now?

[wizkid]

Can you boot in to windows in safe mode if so you could try updating Video card + sound drivers and chipset as well.

Hope this helps.

wizkid