Whenever I start up my machine, I get the following results:

Normal: After the Windows XP loading screen, I get a completely blank
screen (no cursor etc), at which point nothing happens, ever.

Safe mode (any safe mode): The system begins loaing, but freezes when
loading agp440.sys. When agp440.sys was disabled using the recovery console,
the loading hangs at Mup.sys. I don't want to disable that, because I don't
know what it does, or how important it is. Judging by current results,
something else would just freeze anyway.

I have tried manually rolling back the system registry, just in case, using
the recovery console, but no luck. Furthermore, when I tried to run a repair
install, I discovered that my disc doesn't offer that as an option; only a
complete reinstall.

I don't think this is a hardware-related issue, because I also booted up the
machine on a Gnoppix disc, and it ran fine (bar not being able to use any
files on such a backwards O/S).

I'm losing my mind. Somebody please help me. Thanks,
bigFoot

I've had a similar problem. under XP Home, after the "windows loading screen
is on for about 30 seconds, the screen goes blank, and there's no indication
of disk usage, or anything else. However, I am able to start the computer in
safe mode. When i do that and run Norton Disk Doctor, (no fix), it
invariably tells me I have problems with my security descriptors. If I then
ask to have the problems checked at reboot, dskchk runs and will usually fix
the problem. However, the problem recurs about every couple of weeks. The
last time it happened, Norton Disk Doctor, under index check, also told me I
had orphan files. Again, running dskchk upon restart eventually fixed the
problem (although only after it had run twice and I tried restarting in safe
mode).

I have no idea what's causing the recurrent problem. The machine shuts down
normally, and the problem seems unrelated to what program I've been running
prior to shutdown. However, if you can run dskchk, it MAY help fix the
problem.

"bigFoot" wrote:

> Whenever I start up my machine, I get the following results:
>
> Normal: After the Windows XP loading screen, I get a completely blank
> screen (no cursor etc), at which point nothing happens, ever.
>
> Safe mode (any safe mode): The system begins loaing, but freezes when
> loading agp440.sys. When agp440.sys was disabled using the recovery console,
> the loading hangs at Mup.sys. I don't want to disable that, because I don't
> know what it does, or how important it is. Judging by current results,
> something else would just freeze anyway.
>
> I have tried manually rolling back the system registry, just in case, using
> the recovery console, but no luck. Furthermore, when I tried to run a repair
> install, I discovered that my disc doesn't offer that as an option; only a
> complete reinstall.
>
> I don't think this is a hardware-related issue, because I also booted up the
> machine on a Gnoppix disc, and it ran fine (bar not being able to use any
> files on such a backwards O/S).
>
> I'm losing my mind. Somebody please help me. Thanks,
> bigFoot