My daughter is having a big problem that we can not seem to solve. Her
computer a Compac will not boot on the monitor a LCD it says:

VGA Input:
No Input Signal
DVI Input:
No Input Signal

Recommended Settings:
1280x1024-
60V

We have tried using another monitor and removing her Video Graphics card
with no luck and Googling the error.Any ideas?

Dawn wrote:

> My daughter is having a big problem that we can not seem to solve. Her
> computer a Compac will not boot on the monitor a LCD it says:
>
> VGA Input:
> No Input Signal
> DVI Input:
> No Input Signal
>
> Recommended Settings:
> 1280x1024-
> 60V
>
> We have tried using another monitor and removing her Video Graphics card
> with no luck and Googling the error.Any ideas?
>

Check out the monitor on another computer. If it is working
satisfactorily with the other computer, then one can assume
that the problem is with the video card in the Compaq or
even the motherboard. Are there any indications that the
motherboard is powering up?

Check the graphics card on a different computer. The graphics (aka
video) card might be dead.


Dawn wrote:
> My daughter is having a big problem that we can not seem to solve. Her
> computer a Compac will not boot on the monitor a LCD it says:
>
> VGA Input:
> No Input Signal
> DVI Input:
> No Input Signal
>
> Recommended Settings:
> 1280x1024-
> 60V
>
> We have tried using another monitor and removing her Video Graphics card
> with no luck and Googling the error.Any ideas?

If the PC doesn't boot, then there is no signal for the monitor. The
problem is not the monitor, but the PC. Is there any response whatsoever
from the PC when power is applied? Any beeps, LED indicators flash,
keyboard indicators blink? If nothing happens, and the unit is supplied
with power, then the powersupply or motherboard is faulty.

Dawn wrote:

> My daughter is having a big problem that we can not seem to solve. Her
> computer a Compac will not boot on the monitor a LCD it says:
>
> VGA Input:
> No Input Signal
> DVI Input:
> No Input Signal
>
> Recommended Settings:
> 1280x1024-
> 60V
>
> We have tried using another monitor and removing her Video Graphics card
> with no luck and Googling the error.Any ideas?
>
>
>

She says the power light is coming on but after that just that message on
the screen.
"Ghostrider" <-00-@fitron.142> wrote in message
news:OmgmP$(E-Mail Removed)...
>
> Dawn wrote:
>
>> My daughter is having a big problem that we can not seem to solve. Her
>> computer a Compac will not boot on the monitor a LCD it says:
>>
>> VGA Input:
>> No Input Signal
>> DVI Input:
>> No Input Signal
>>
>> Recommended Settings:
>> 1280x1024-
>> 60V
>>
>> We have tried using another monitor and removing her Video Graphics card
>> with no luck and Googling the error.Any ideas?
>>
>
> Check out the monitor on another computer. If it is working
> satisfactorily with the other computer, then one can assume
> that the problem is with the video card in the Compaq or
> even the motherboard. Are there any indications that the
> motherboard is powering up?

She says that there is no beep, thats the first thing I asked her, the power
lights are coming on. If this was the mother board wounldn't nothing come
on?
"Bob I" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> If the PC doesn't boot, then there is no signal for the monitor. The
> problem is not the monitor, but the PC. Is there any response whatsoever
> from the PC when power is applied? Any beeps, LED indicators flash,
> keyboard indicators blink? If nothing happens, and the unit is supplied
> with power, then the powersupply or motherboard is faulty.
>
> Dawn wrote:
>
>> My daughter is having a big problem that we can not seem to solve. Her
>> computer a Compac will not boot on the monitor a LCD it says:
>>
>> VGA Input:
>> No Input Signal
>> DVI Input:
>> No Input Signal
>>
>> Recommended Settings:
>> 1280x1024-
>> 60V
>>
>> We have tried using another monitor and removing her Video Graphics card
>> with no luck and Googling the error.Any ideas?
>>
>>
>>
>

Sounds like the motherboard or CPU is failed, I suggest contacting
Compaq/HP as to resolution of the issue.

Dawn wrote:

> She says that there is no beep, thats the first thing I asked her, the power
> lights are coming on. If this was the mother board wounldn't nothing come
> on?
> "Bob I" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
>
>>If the PC doesn't boot, then there is no signal for the monitor. The
>>problem is not the monitor, but the PC. Is there any response whatsoever
>>from the PC when power is applied? Any beeps, LED indicators flash,
>>keyboard indicators blink? If nothing happens, and the unit is supplied
>>with power, then the powersupply or motherboard is faulty.
>>
>>Dawn wrote:
>>
>>
>>>My daughter is having a big problem that we can not seem to solve. Her
>>>computer a Compac will not boot on the monitor a LCD it says:
>>>
>>> VGA Input:
>>>No Input Signal
>>> DVI Input:
>>>No Input Signal
>>>
>>>Recommended Settings:
>>>1280x1024-
>>>60V
>>>
>>>We have tried using another monitor and removing her Video Graphics card
>>>with no luck and Googling the error.Any ideas?
>>>
>>>
>>>
>>
>
>

[world most enemy]

Please help... I have the same problem.
What is the solution?