"Windows XP Service Pack 2 with Advanced Security Technologies helps you protect your PC against viruses, hackers, and worms." - this is how Microsoft promotes its Service Pack 2 on its website. What the company does not say: Instead of viruses, worms, and hackers, the supposedly safe SP2 for Windows XP invites any Internet user to have a look around your PC.



As soon as you install SP2 on a Windows XP PC with a certain configuration, your file and printer sharing data are visible worldwide, despite an activated Firewall. This also applies to all other services. The PC only has to provide sharing for an internal local network and connect to the Internet via dial-up or ISDN. Users of DSL services are also affected, if a firewall is not integrated into the DSL modem or a common modem instead of a DSL router is used. Additionally, Internet Connection Sharing of the PC has to be disabled.



A number of test scans run by PC-Welt revealed that this in fact is a common configuration and not a rare sight. Without great effort, we were able to discover private documents on easily accessible computers on the Internet. It must be assumed, that these users wrongly believe they are safe and that their sharing configurations are only visible in their network at home: Often, we did not even encounter password protection.


Already Windows 95 affected by a similar problem


Experienced Windows users may remember that there was a similar problem in the past, specifically with Windows 95. Back then, Microsoft forgot to separate file and printer sharing from the dial-up network adapter when such a connection was configured.



In other words, this caused the service to be released worldwide through the dial-up connection as soon as you were connected to the Internet. Microsoft at that time issued an update to patch the bug. The fact that file and printer sharing since then is not connected to the dial-up connection anymore, can easily be seen on your system: Right-click on the symbol "My Network Places" and select "Properties". Repeat the right-click and selection with the icon of your dial-up connection and select the tab "Settings". If there is no check at "File and Printer Sharing", it indicates that this service should not be made available through your dial-up connection.



This in fact is true for Windows XP without Service Pack. Since SP1, this configuration is hardly more than cosmetics and does not serve any purpose anymore. This means, the file and printer sharing service is connected in general, also to the dial-up network adapter. This in itself is a serious bug, since your shared data potentially could be seen on the Internet. However, there are no catastrophic effects, as every dial-up connection is configured with an activated firewall by default.



If you intended to deactivate this firewall, Windows displayed an easily recognizable dialog, that this choice would allow access to your computer. Despite the bug in SP1, the configuration of the firewall was worked out in a clean way: You were able to run the dial-up connection with a firewall and the internal network card without, because the latter was supposed to enable access through the Windows network.


SP1 + SP2 leads to a catastrophic error


Due to the bug carried over from SP1 as well as a new bug, the firewall configuration with SP2 has a catastrophic effect. The SP2 installation simply uses the previous configuration of the firewall: If it was active for the dial-up connection, now it also has been activated for the network adapter.



At the same time, an exception is determined for file and printer sharing: For the internal network card - and astonishingly also for all adapters.



With the first use of the dial-up connection after installing SP2, all of your shared data are available on the Internet. Now, other users can start guessing your passwords for administrator and guest and you basically are no more secure than the first Windows 95 users with an Internet connection - thanks to Service Pack 2.


How to correct the problem


It is not advisable to keep this defective default configuration. However, the previous environment cannot be restored: The configuration for the firewall was changed, which does not allow the setting of active or inactive conditions or exceptions for each network adapter anymore. Now this only works for network areas.



Choose "Windows Firewall" in the in the Windows Control Panel and the there the tab "Exceptions". Select "File and Print Services" and click on "Edit". Now you can see four ports which are used by the file and print sharing service.



To lock the service to the outside and keep it open for the internal LAN, you have to individually select and change its area with the respective button. Our reader Yves Jerschov notified us of another bug: The value for the area set by default "Only for own network (Subnet)" only works, if the Internet Connection Sharing is activated. If this is not the case, your shared data are visible worldwide. This error can be corrected by choosing "User defined List" and entering the IP addresses that are supposed to have access - the IP addresses of your LAN. A whole range of an IP area can be entered as "192.168.x.0/255.255.255.0", if the respective addresses start with 192.168.x.



After these measures, you can be sure to be as safe as you were with SP1. Great, don't you think?

Care to corroborate that info with a URL from a LEGITIMATE CERT or Security Organization ?

So far this information remains uncorroborated !

But what do you expect from an anonymous poster posting in HTML.

Dave





"User1" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
"Windows XP Service Pack 2 with Advanced Security Technologies helps you protect your PC
against viruses, hackers, and worms." - this is how Microsoft promotes its Service Pack 2 on
its website. What the company does not say: Instead of viruses, worms, and hackers, the
supposedly safe SP2 for Windows XP invites any Internet user to have a look around your PC.



As soon as you install SP2 on a Windows XP PC with a certain configuration, your file and
printer sharing data are visible worldwide, despite an activated Firewall. This also applies
to all other services. The PC only has to provide sharing for an internal local network and
connect to the Internet via dial-up or ISDN. Users of DSL services are also affected, if a
firewall is not integrated into the DSL modem or a common modem instead of a DSL router is
used. Additionally, Internet Connection Sharing of the PC has to be disabled.



A number of test scans run by PC-Welt revealed that this in fact is a common configuration
and not a rare sight. Without great effort, we were able to discover private documents on
easily accessible computers on the Internet. It must be assumed, that these users wrongly
believe they are safe and that their sharing configurations are only visible in their
network at home: Often, we did not even encounter password protection.


Already Windows 95 affected by a similar problem


Experienced Windows users may remember that there was a similar problem in the past,
specifically with Windows 95. Back then, Microsoft forgot to separate file and printer
sharing from the dial-up network adapter when such a connection was configured.



In other words, this caused the service to be released worldwide through the dial-up
connection as soon as you were connected to the Internet. Microsoft at that time issued an
update to patch the bug. The fact that file and printer sharing since then is not connected
to the dial-up connection anymore, can easily be seen on your system: Right-click on the
symbol "My Network Places" and select "Properties". Repeat the right-click and selection
with the icon of your dial-up connection and select the tab "Settings". If there is no check
at "File and Printer Sharing", it indicates that this service should not be made available
through your dial-up connection.



This in fact is true for Windows XP without Service Pack. Since SP1, this configuration is
hardly more than cosmetics and does not serve any purpose anymore. This means, the file and
printer sharing service is connected in general, also to the dial-up network adapter. This
in itself is a serious bug, since your shared data potentially could be seen on the
Internet. However, there are no catastrophic effects, as every dial-up connection is
configured with an activated firewall by default.



If you intended to deactivate this firewall, Windows displayed an easily recognizable
dialog, that this choice would allow access to your computer. Despite the bug in SP1, the
configuration of the firewall was worked out in a clean way: You were able to run the
dial-up connection with a firewall and the internal network card without, because the latter
was supposed to enable access through the Windows network.


SP1 + SP2 leads to a catastrophic error


Due to the bug carried over from SP1 as well as a new bug, the firewall configuration with
SP2 has a catastrophic effect. The SP2 installation simply uses the previous configuration
of the firewall: If it was active for the dial-up connection, now it also has been activated
for the network adapter.



At the same time, an exception is determined for file and printer sharing: For the internal
network card - and astonishingly also for all adapters.



With the first use of the dial-up connection after installing SP2, all of your shared data
are available on the Internet. Now, other users can start guessing your passwords for
administrator and guest and you basically are no more secure than the first Windows 95 users
with an Internet connection - thanks to Service Pack 2.


How to correct the problem


It is not advisable to keep this defective default configuration. However, the previous
environment cannot be restored: The configuration for the firewall was changed, which does
not allow the setting of active or inactive conditions or exceptions for each network
adapter anymore. Now this only works for network areas.



Choose "Windows Firewall" in the in the Windows Control Panel and the there the tab
"Exceptions". Select "File and Print Services" and click on "Edit". Now you can see four
ports which are used by the file and print sharing service.



To lock the service to the outside and keep it open for the internal LAN, you have to
individually select and change its area with the respective button. Our reader Yves Jerschov
notified us of another bug: The value for the area set by default "Only for own network
(Subnet)" only works, if the Internet Connection Sharing is activated. If this is not the
case, your shared data are visible worldwide. This error can be corrected by choosing "User
defined List" and entering the IP addresses that are supposed to have access - the IP
addresses of your LAN. A whole range of an IP area can be entered as
"192.168.x.0/255.255.255.0", if the respective addresses start with 192.168.x.



After these measures, you can be sure to be as safe as you were with SP1. Great, don't you
think?

Perhaps this is why you should pay experts to set up your computer. There is no problem except users thinking they know what they are doing. This is a USER STUPIDITY problem and has nothing to do with XP.

--
----------------------------------------------------------
http://www.uscricket.com
"User1" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
"Windows XP Service Pack 2 with Advanced Security Technologies helps you protect your PC against viruses, hackers, and worms." - this is how Microsoft promotes its Service Pack 2 on its website. What the company does not say: Instead of viruses, worms, and hackers, the supposedly safe SP2 for Windows XP invites any Internet user to have a look around your PC.



As soon as you install SP2 on a Windows XP PC with a certain configuration, your file and printer sharing data are visible worldwide, despite an activated Firewall. This also applies to all other services. The PC only has to provide sharing for an internal local network and connect to the Internet via dial-up or ISDN. Users of DSL services are also affected, if a firewall is not integrated into the DSL modem or a common modem instead of a DSL router is used. Additionally, Internet Connection Sharing of the PC has to be disabled.



A number of test scans run by PC-Welt revealed that this in fact is a common configuration and not a rare sight. Without great effort, we were able to discover private documents on easily accessible computers on the Internet. It must be assumed, that these users wrongly believe they are safe and that their sharing configurations are only visible in their network at home: Often, we did not even encounter password protection.


Already Windows 95 affected by a similar problem


Experienced Windows users may remember that there was a similar problem in the past, specifically with Windows 95. Back then, Microsoft forgot to separate file and printer sharing from the dial-up network adapter when such a connection was configured.



In other words, this caused the service to be released worldwide through the dial-up connection as soon as you were connected to the Internet. Microsoft at that time issued an update to patch the bug. The fact that file and printer sharing since then is not connected to the dial-up connection anymore, can easily be seen on your system: Right-click on the symbol "My Network Places" and select "Properties". Repeat the right-click and selection with the icon of your dial-up connection and select the tab "Settings". If there is no check at "File and Printer Sharing", it indicates that this service should not be made available through your dial-up connection.



This in fact is true for Windows XP without Service Pack. Since SP1, this configuration is hardly more than cosmetics and does not serve any purpose anymore. This means, the file and printer sharing service is connected in general, also to the dial-up network adapter. This in itself is a serious bug, since your shared data potentially could be seen on the Internet. However, there are no catastrophic effects, as every dial-up connection is configured with an activated firewall by default.



If you intended to deactivate this firewall, Windows displayed an easily recognizable dialog, that this choice would allow access to your computer. Despite the bug in SP1, the configuration of the firewall was worked out in a clean way: You were able to run the dial-up connection with a firewall and the internal network card without, because the latter was supposed to enable access through the Windows network.


SP1 + SP2 leads to a catastrophic error


Due to the bug carried over from SP1 as well as a new bug, the firewall configuration with SP2 has a catastrophic effect. The SP2 installation simply uses the previous configuration of the firewall: If it was active for the dial-up connection, now it also has been activated for the network adapter.



At the same time, an exception is determined for file and printer sharing: For the internal network card - and astonishingly also for all adapters.



With the first use of the dial-up connection after installing SP2, all of your shared data are available on the Internet. Now, other users can start guessing your passwords for administrator and guest and you basically are no more secure than the first Windows 95 users with an Internet connection - thanks to Service Pack 2.


How to correct the problem


It is not advisable to keep this defective default configuration. However, the previous environment cannot be restored: The configuration for the firewall was changed, which does not allow the setting of active or inactive conditions or exceptions for each network adapter anymore. Now this only works for network areas.



Choose "Windows Firewall" in the in the Windows Control Panel and the there the tab "Exceptions". Select "File and Print Services" and click on "Edit". Now you can see four ports which are used by the file and print sharing service.



To lock the service to the outside and keep it open for the internal LAN, you have to individually select and change its area with the respective button. Our reader Yves Jerschov notified us of another bug: The value for the area set by default "Only for own network (Subnet)" only works, if the Internet Connection Sharing is activated. If this is not the case, your shared data are visible worldwide. This error can be corrected by choosing "User defined List" and entering the IP addresses that are supposed to have access - the IP addresses of your LAN. A whole range of an IP area can be entered as "192.168.x.0/255.255.255.0", if the respective addresses start with 192.168.x.



After these measures, you can be sure to be as safe as you were with SP1. Great, don't you think?

Find it yourself! Or do you not know how to do a search? Ask here - I'm sure someone will help you!


"David H. Lipman" <DLipman~nospam~@Verizon.Net> wrote in message news:%(E-Mail Removed)...
Care to corroborate that info with a URL from a LEGITIMATE CERT or Security Organization ?

So far this information remains uncorroborated !

But what do you expect from an anonymous poster posting in HTML.

Dave





"User1" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
"Windows XP Service Pack 2 with Advanced Security Technologies helps you protect your PC
against viruses, hackers, and worms." - this is how Microsoft promotes its Service Pack 2 on
its website. What the company does not say: Instead of viruses, worms, and hackers, the
supposedly safe SP2 for Windows XP invites any Internet user to have a look around your PC.



As soon as you install SP2 on a Windows XP PC with a certain configuration, your file and
printer sharing data are visible worldwide, despite an activated Firewall. This also applies
to all other services. The PC only has to provide sharing for an internal local network and
connect to the Internet via dial-up or ISDN. Users of DSL services are also affected, if a
firewall is not integrated into the DSL modem or a common modem instead of a DSL router is
used. Additionally, Internet Connection Sharing of the PC has to be disabled.



A number of test scans run by PC-Welt revealed that this in fact is a common configuration
and not a rare sight. Without great effort, we were able to discover private documents on
easily accessible computers on the Internet. It must be assumed, that these users wrongly
believe they are safe and that their sharing configurations are only visible in their
network at home: Often, we did not even encounter password protection.


Already Windows 95 affected by a similar problem


Experienced Windows users may remember that there was a similar problem in the past,
specifically with Windows 95. Back then, Microsoft forgot to separate file and printer
sharing from the dial-up network adapter when such a connection was configured.



In other words, this caused the service to be released worldwide through the dial-up
connection as soon as you were connected to the Internet. Microsoft at that time issued an
update to patch the bug. The fact that file and printer sharing since then is not connected
to the dial-up connection anymore, can easily be seen on your system: Right-click on the
symbol "My Network Places" and select "Properties". Repeat the right-click and selection
with the icon of your dial-up connection and select the tab "Settings". If there is no check
at "File and Printer Sharing", it indicates that this service should not be made available
through your dial-up connection.



This in fact is true for Windows XP without Service Pack. Since SP1, this configuration is
hardly more than cosmetics and does not serve any purpose anymore. This means, the file and
printer sharing service is connected in general, also to the dial-up network adapter. This
in itself is a serious bug, since your shared data potentially could be seen on the
Internet. However, there are no catastrophic effects, as every dial-up connection is
configured with an activated firewall by default.



If you intended to deactivate this firewall, Windows displayed an easily recognizable
dialog, that this choice would allow access to your computer. Despite the bug in SP1, the
configuration of the firewall was worked out in a clean way: You were able to run the
dial-up connection with a firewall and the internal network card without, because the latter
was supposed to enable access through the Windows network.


SP1 + SP2 leads to a catastrophic error


Due to the bug carried over from SP1 as well as a new bug, the firewall configuration with
SP2 has a catastrophic effect. The SP2 installation simply uses the previous configuration
of the firewall: If it was active for the dial-up connection, now it also has been activated
for the network adapter.



At the same time, an exception is determined for file and printer sharing: For the internal
network card - and astonishingly also for all adapters.



With the first use of the dial-up connection after installing SP2, all of your shared data
are available on the Internet. Now, other users can start guessing your passwords for
administrator and guest and you basically are no more secure than the first Windows 95 users
with an Internet connection - thanks to Service Pack 2.


How to correct the problem


It is not advisable to keep this defective default configuration. However, the previous
environment cannot be restored: The configuration for the firewall was changed, which does
not allow the setting of active or inactive conditions or exceptions for each network
adapter anymore. Now this only works for network areas.



Choose "Windows Firewall" in the in the Windows Control Panel and the there the tab
"Exceptions". Select "File and Print Services" and click on "Edit". Now you can see four
ports which are used by the file and print sharing service.



To lock the service to the outside and keep it open for the internal LAN, you have to
individually select and change its area with the respective button. Our reader Yves Jerschov
notified us of another bug: The value for the area set by default "Only for own network
(Subnet)" only works, if the Internet Connection Sharing is activated. If this is not the
case, your shared data are visible worldwide. This error can be corrected by choosing "User
defined List" and entering the IP addresses that are supposed to have access - the IP
addresses of your LAN. A whole range of an IP area can be entered as
"192.168.x.0/255.255.255.0", if the respective addresses start with 192.168.x.



After these measures, you can be sure to be as safe as you were with SP1. Great, don't you
think?

I have and as I stated -- "So far this information remains uncorroborated !"

You on the other hand posted NO referencing information -- NONE.

I was alerted to the following rag Yesterday -- http://www.theinquirer.net/?article=18527
No reputable company nor CERT has corroborated PC Welt.

If you believe everything you read on the web, you'll believe these guys...
http://www.flat-earth.org/
The Flat Earth Society would lead you to believe the world is flat.

Dave




"User1" <(E-Mail Removed)> wrote in message news:%(E-Mail Removed)...
Find it yourself! Or do you not know how to do a search? Ask here - I'm sure someone will
help you!

David Candy wrote:
> Perhaps this is why you should pay experts to set up your computer.
> There is no problem except users thinking they know what they are doing.
> This is a USER STUPIDITY problem and has nothing to do with XP.
>
> --

What's your point? Almost all of SP2 is directed at stupid or
ignorant/lazy users. If there's an open door, and the great mass of
users is not equipped to close it, then who will?

XP is a corporate operating system. It is not designed for home users.

--
----------------------------------------------------------
http://www.uscricket.com
"Herb Fritatta" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> David Candy wrote:
> > Perhaps this is why you should pay experts to set up your computer.
> > There is no problem except users thinking they know what they are doing.
> > This is a USER STUPIDITY problem and has nothing to do with XP.
> >
> > --
>
> What's your point? Almost all of SP2 is directed at stupid or
> ignorant/lazy users. If there's an open door, and the great mass of
> users is not equipped to close it, then who will?

"Herb Fritatta" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> What's your point? Almost all of SP2 is directed at stupid or
> ignorant/lazy users. If there's an open door, and the great mass of users
> is not equipped to close it, then who will?

Your version of Thunderbird is superseded and vulnerable to some known
security problems:
http://www.mozilla.org/projects/secu...l#mozilla1.7.3

I'll leave it to you to decide what sort of user description you fall under.

--
_______________________________________
Hyperlinks used to ensure advice is current
Sandi - Microsoft MVP since 1999 (IE/OE)
http://inetexplorer.mvps.org

On Sat, 18 Sep 2004 22:42:34 -0400, "David H. Lipman"
<DLipman~nospam~@Verizon.Net> wrote:

>Care to corroborate that info with a URL from a LEGITIMATE CERT or Security Organization ?
>
>So far this information remains uncorroborated !
>
>But what do you expect from an anonymous poster posting in HTML.
>
>Dave
>
>
>


Yeah, and we ***ALL*** know your name really is "David H. Lipman",
because this is USENET and you say so......

>
>
>"User1" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
>"Windows XP Service Pack 2 with Advanced Security Technologies helps you protect your PC
>against viruses, hackers, and worms." - this is how Microsoft promotes its Service Pack 2 on
>its website. What the company does not say: Instead of viruses, worms, and hackers, the
>supposedly safe SP2 for Windows XP invites any Internet user to have a look around your PC.
>
>
>
>As soon as you install SP2 on a Windows XP PC with a certain configuration, your file and
>printer sharing data are visible worldwide, despite an activated Firewall. This also applies
>to all other services. The PC only has to provide sharing for an internal local network and
>connect to the Internet via dial-up or ISDN. Users of DSL services are also affected, if a
>firewall is not integrated into the DSL modem or a common modem instead of a DSL router is
>used. Additionally, Internet Connection Sharing of the PC has to be disabled.
>
>
>
>A number of test scans run by PC-Welt revealed that this in fact is a common configuration
>and not a rare sight. Without great effort, we were able to discover private documents on
>easily accessible computers on the Internet. It must be assumed, that these users wrongly
>believe they are safe and that their sharing configurations are only visible in their
>network at home: Often, we did not even encounter password protection.
>
>
>Already Windows 95 affected by a similar problem
>
>
>Experienced Windows users may remember that there was a similar problem in the past,
>specifically with Windows 95. Back then, Microsoft forgot to separate file and printer
>sharing from the dial-up network adapter when such a connection was configured.
>
>
>
>In other words, this caused the service to be released worldwide through the dial-up
>connection as soon as you were connected to the Internet. Microsoft at that time issued an
>update to patch the bug. The fact that file and printer sharing since then is not connected
>to the dial-up connection anymore, can easily be seen on your system: Right-click on the
>symbol "My Network Places" and select "Properties". Repeat the right-click and selection
>with the icon of your dial-up connection and select the tab "Settings". If there is no check
>at "File and Printer Sharing", it indicates that this service should not be made available
>through your dial-up connection.
>
>
>
>This in fact is true for Windows XP without Service Pack. Since SP1, this configuration is
>hardly more than cosmetics and does not serve any purpose anymore. This means, the file and
>printer sharing service is connected in general, also to the dial-up network adapter. This
>in itself is a serious bug, since your shared data potentially could be seen on the
>Internet. However, there are no catastrophic effects, as every dial-up connection is
>configured with an activated firewall by default.
>
>
>
>If you intended to deactivate this firewall, Windows displayed an easily recognizable
>dialog, that this choice would allow access to your computer. Despite the bug in SP1, the
>configuration of the firewall was worked out in a clean way: You were able to run the
>dial-up connection with a firewall and the internal network card without, because the latter
>was supposed to enable access through the Windows network.
>
>
>SP1 + SP2 leads to a catastrophic error
>
>
>Due to the bug carried over from SP1 as well as a new bug, the firewall configuration with
>SP2 has a catastrophic effect. The SP2 installation simply uses the previous configuration
>of the firewall: If it was active for the dial-up connection, now it also has been activated
>for the network adapter.
>
>
>
>At the same time, an exception is determined for file and printer sharing: For the internal
>network card - and astonishingly also for all adapters.
>
>
>
>With the first use of the dial-up connection after installing SP2, all of your shared data
>are available on the Internet. Now, other users can start guessing your passwords for
>administrator and guest and you basically are no more secure than the first Windows 95 users
>with an Internet connection - thanks to Service Pack 2.
>
>
>How to correct the problem
>
>
>It is not advisable to keep this defective default configuration. However, the previous
>environment cannot be restored: The configuration for the firewall was changed, which does
>not allow the setting of active or inactive conditions or exceptions for each network
>adapter anymore. Now this only works for network areas.
>
>
>
>Choose "Windows Firewall" in the in the Windows Control Panel and the there the tab
>"Exceptions". Select "File and Print Services" and click on "Edit". Now you can see four
>ports which are used by the file and print sharing service.
>
>
>
>To lock the service to the outside and keep it open for the internal LAN, you have to
>individually select and change its area with the respective button. Our reader Yves Jerschov
>notified us of another bug: The value for the area set by default "Only for own network
>(Subnet)" only works, if the Internet Connection Sharing is activated. If this is not the
>case, your shared data are visible worldwide. This error can be corrected by choosing "User
>defined List" and entering the IP addresses that are supposed to have access - the IP
>addresses of your LAN. A whole range of an IP area can be entered as
>"192.168.x.0/255.255.255.0", if the respective addresses start with 192.168.x.
>
>
>
>After these measures, you can be sure to be as safe as you were with SP1. Great, don't you
>think?
>

Now - That's a crock!!


"David Candy" <(E-Mail Removed)> wrote in message news:%(E-Mail Removed)...
XP is a corporate operating system. It is not designed for home users.

--
----------------------------------------------------------
http://www.uscricket.com
"Herb Fritatta" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> David Candy wrote:
> > Perhaps this is why you should pay experts to set up your computer.
> > There is no problem except users thinking they know what they are doing.
> > This is a USER STUPIDITY problem and has nothing to do with XP.
> >
> > --
>
> What's your point? Almost all of SP2 is directed at stupid or
> ignorant/lazy users. If there's an open door, and the great mass of
> users is not equipped to close it, then who will?