I need to write a batch file in which I need to capture and then be able to
use that IP address in the following manner:

route 10.0.0.0 mask 255.0.0.0 {IP Address Here}

The catch is that I need the VPN IP address and I would have two. The
primary IP which was used to connect to the internet, then the VPN address.

Thanks for your help in advance.

"David" <(E-Mail Removed)> wrote in message
news:99C77509-16C5-4F3E-A159-(E-Mail Removed)...
> I need to write a batch file in which I need to capture and then be able
to
> use that IP address in the following manner:
>
> route 10.0.0.0 mask 255.0.0.0 {IP Address Here}
>
> The catch is that I need the VPN IP address and I would have two. The
> primary IP which was used to connect to the internet, then the VPN
address.
>
> Thanks for your help in advance.

If you post the output of the command

ipconfig /all

end state exactly which address you wish to extract then
someone can probably help you.

What are you trying to do? If you need to "route" the Internet traffic
while you are using the VPN access, un-check "Use default gateway on
remote.." from within the "advanced" settings of the VPN client.


"David" <(E-Mail Removed)> wrote in message
news:99C77509-16C5-4F3E-A159-(E-Mail Removed)...
>I need to write a batch file in which I need to capture and then be able to
> use that IP address in the following manner:
>
> route 10.0.0.0 mask 255.0.0.0 {IP Address Here}
>
> The catch is that I need the VPN IP address and I would have two. The
> primary IP which was used to connect to the internet, then the VPN
> address.
>
> Thanks for your help in advance.