PC Review


Reply
Thread Tools Rate Thread

Base Filtering Engine Prevents Ethernet Connectivity

 
 
glamart
Guest
Posts: n/a
 
      2nd Aug 2008
Suddenly my Ethernet connectivity to my router or directly to my cable modem
quit working. After much trouble-shooting, I discovered that turning off the
"Base Filtering Engine" service allowed the Ethernet to work normally.
Disabling IPSec policy or the IKE & Authip IPSec keying modules does not
help and
these services seem to work OK.
Any ideas about what can cause this problem will be appreciated.

 
Reply With Quote
 
 
 
 
Jack \(MVP-Networking\).
Guest
Posts: n/a
 
      2nd Aug 2008
Hi
Services do not stop, or start working, as they pleased.
However computers that are connected to the Internet might be contaminated
with Viruses, and other Junk.
Check your computer thoroughly with Anti Virus, and Anti spyware
applications.
You did not provided any technical information about your system (Type of
connection, OS, etc).
Maybe this can Help, http://www.ezlan.net/debug.html
Jack (MS, MVP-Networking)

"glamart" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Suddenly my Ethernet connectivity to my router or directly to my cable
> modem
> quit working. After much trouble-shooting, I discovered that turning off
> the
> "Base Filtering Engine" service allowed the Ethernet to work normally.
> Disabling IPSec policy or the IKE & Authip IPSec keying modules does not
> help and
> these services seem to work OK.
> Any ideas about what can cause this problem will be appreciated.
>


 
Reply With Quote
 
glamart
Guest
Posts: n/a
 
      3rd Aug 2008
Thanks for the reply. Sorry for lack of info. The OS is Windows Vista
Ultimate SP1 and a wired connection to a Linksys router with one other wired
PC. The router is connected to the Internet via a Motorola modem. The
Ethernet connection stopped working suddenly after a boot at the beginning
of the day. It was fine the day before. I talked to ASUS who said it was a
mobo failure and returned the board for repair...board was OK. Using the
Windows boot diagnostic mode, I found that disabling the Base Filtering
Engine service returned the Ethernet to normal operation. I tried disabling
IPsec Policy and the IKE ...etc.. services individually but they had no
effect on the problem. I also tried the Broadcast flag reg fix from
Microsoft but no joy. No Base Filtering Engine problems can be found in the
MS FAQ database.
Items at EZlan were checked but no problems were found. NAV is up to date
and no viruses or spyware was found. I also reset the tcp/ip stack. All to
no avail. The network works fine as long as the Base Filtering Engine
service is disabled.
Any other ideas will be appreciated...!
--


"Jack (MVP-Networking)." <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Hi
> Services do not stop, or start working, as they pleased.
> However computers that are connected to the Internet might be contaminated
> with Viruses, and other Junk.
> Check your computer thoroughly with Anti Virus, and Anti spyware
> applications.
> You did not provided any technical information about your system (Type of
> connection, OS, etc).
> Maybe this can Help, http://www.ezlan.net/debug.html
> Jack (MS, MVP-Networking)
>
> "glamart" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Suddenly my Ethernet connectivity to my router or directly to my cable
>> modem
>> quit working. After much trouble-shooting, I discovered that turning off
>> the
>> "Base Filtering Engine" service allowed the Ethernet to work normally.
>> Disabling IPSec policy or the IKE & Authip IPSec keying modules does not
>> help and
>> these services seem to work OK.
>> Any ideas about what can cause this problem will be appreciated.
>>

>


 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: Help with Windows Firewall and Base Filtering Engine Spirit Windows Vista General Discussion 3 7th Jul 2009 06:39 PM
Re: Help with Windows Firewall and Base Filtering Engine Spirit Windows Vista General Discussion 0 1st Jul 2009 08:54 AM
Re: Help with Windows Firewall and Base Filtering Engine Vista Succubus Hunter Windows Vista General Discussion 0 1st Jul 2009 04:30 AM
Base Filtering Engine wont start Rod Windows Vista General Discussion 1 31st Dec 2007 04:06 PM
The Base Filtering Engine service terminated =?Utf-8?B?UENULVNjb3R0?= Windows Vista Security 2 8th Oct 2007 05:55 AM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 03:10 AM.