On XP Pro SP2

I have created a LiveCD using the latest BartPE Builder.

http://www.nu2.nu/pebuilder/

I used the default builder and is working ok, but I find no
program Exit for a normal boot to XP...

Any links or suggestions?

pappy

"gram pappy" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> On XP Pro SP2
>
> I have created a LiveCD using the latest BartPE Builder.
>
> http://www.nu2.nu/pebuilder/
>
> I used the default builder and is working ok, but I find no
> program Exit for a normal boot to XP...
>
> Any links or suggestions?
>
> pappy

What exactly do you mean with "program exit for a normal boot to XP"?

you may have to create a new one.

so that you can add utilities to the
pe which can be useful when the
operating system cannot.

for example, you should add the
driveimage xml pluggin to barts pe.

and also add a copy of the drive image
xml program to that disk

then burn it.

that way when you initiate the pe, you
will have the drive image utility available
to you so that you can restore your disk
images,

that is if you choose disk imaging as a
method to archive and restore your
computer data.

if you use the suggestion above, be sure
to destroy the old pe you built.

because cd's can become a confusing issue
when you are trying to restore your
system.

--
db·´¯`·...¸><)))º>
DatabaseBen, Retired Professional
- Systems Analyst
- Database Developer
- Accountancy
- Veteran of the Armed Forces
- @Hotmail.com

"share the nirvana mann" - dbZen

~~~~~~~~~~~~~~~
>
>

"gram pappy" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> On XP Pro SP2
>
> I have created a LiveCD using the latest BartPE Builder.
>
> http://www.nu2.nu/pebuilder/
>
> I used the default builder and is working ok, but I find no
> program Exit for a normal boot to XP...
>
> Any links or suggestions?
>
> pappy

In news:(E-Mail Removed),
gram pappy <(E-Mail Removed)> typed:
> On XP Pro SP2
>
> I have created a LiveCD using the latest BartPE Builder.
>
> http://www.nu2.nu/pebuilder/
>
> I used the default builder and is working ok, but I find no
> program Exit for a normal boot to XP...
>
> Any links or suggestions?
>
> pappy

Because I think you have to TYPE *EXIT*

No ?
--
ND
Return address ok.

"gram pappy" wrote:

>
> On XP Pro SP2
>
> I have created a LiveCD using the latest BartPE Builder.
>
> http://www.nu2.nu/pebuilder/
>
> I used the default builder and is working ok, but I find no
> program Exit for a normal boot to XP...
>
> Any links or suggestions?
>
> pappy
>

Quite simple. Finish what you are doing with the PE, remove the disk from
the drive and reboot the machine.

"Pegasus [MVP]" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
>
> "gram pappy" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>>
>> On XP Pro SP2
>>
>> I have created a LiveCD using the latest BartPE Builder.
>>
>> http://www.nu2.nu/pebuilder/
>>
>> I used the default builder and is working ok, but I find no
>> program Exit for a normal boot to XP...
>>
>> Any links or suggestions?
>>
>> pappy
>
> What exactly do you mean with "program exit for a normal boot to XP"?
>
"The system can return to its previous operating system when the
computer
is rebooted without the LiveCD".

Command prompt is available, but entering exit I get no response...

pappy

That is exactly were I'm headed "db", thanks...
pappy


"db" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> you may have to create a new one.
>
> so that you can add utilities to the
> pe which can be useful when the
> operating system cannot.
>
> for example, you should add the
> driveimage xml pluggin to barts pe.
>
> and also add a copy of the drive image
> xml program to that disk
>
> then burn it.
>
> that way when you initiate the pe, you
> will have the drive image utility available
> to you so that you can restore your disk
> images,
>
> that is if you choose disk imaging as a
> method to archive and restore your
> computer data.
>
> if you use the suggestion above, be sure
> to destroy the old pe you built.
>
> because cd's can become a confusing issue
> when you are trying to restore your
> system.
>
> --
> db·´¯`·...¸><)))º>
> DatabaseBen, Retired Professional
> - Systems Analyst
> - Database Developer
> - Accountancy
> - Veteran of the Armed Forces
> - @Hotmail.com
>
> "share the nirvana mann" - dbZen
>
> ~~~~~~~~~~~~~~~
>>
>>
>
> "gram pappy" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>>
>> On XP Pro SP2
>>
>> I have created a LiveCD using the latest BartPE Builder.
>>
>> http://www.nu2.nu/pebuilder/
>>
>> I used the default builder and is working ok, but I find no
>> program Exit for a normal boot to XP...
>>
>> Any links or suggestions?
>>
>> pappy
>

"Mark Adams" <(E-Mail Removed)> wrote in message
news:BBF5F3D3-02CD-4FDA-B5D5-(E-Mail Removed)...
>>
>>
> "gram pappy" wrote:
>
> On XP Pro SP2
> I have created a LiveCD using the latest BartPE Builder.
>
> http://www.nu2.nu/pebuilder/
>
> I used the default builder and is working ok, but I find no
> program Exit for a normal boot to XP...
>
> Any links or suggestions?
>
> pappy
>
>
>> Quite simple. Finish what you are doing with the PE, remove
>> the disk from the drive and reboot the machine.


That is the rub, as I have just started the PE build in basic mode.
It boots up to Bart's desktop with only a "Go" button on bottom.

If I remove the CD, then I have no access to command prompt
and Ctrl/Alt/Del does nothing in Ram drive...

I have no "Win Start" button or status bar.(working on adding this)

pappy

In news:OGWeDY$(E-Mail Removed),
gram pappy typed on Mon, 7 Sep 2009 14:59:17 -0500:
> "Mark Adams" <(E-Mail Removed)> wrote in message
> news:BBF5F3D3-02CD-4FDA-B5D5-(E-Mail Removed)...
>>>
>>>
>> "gram pappy" wrote:
>>
>> On XP Pro SP2
>> I have created a LiveCD using the latest BartPE Builder.
>>
>> http://www.nu2.nu/pebuilder/
>>
>> I used the default builder and is working ok, but I find no
>> program Exit for a normal boot to XP...
>>
>> Any links or suggestions?
>>
>> pappy
>>
>>
>>> Quite simple. Finish what you are doing with the PE, remove
>>> the disk from the drive and reboot the machine.
>
>
> That is the rub, as I have just started the PE build in basic mode.
> It boots up to Bart's desktop with only a "Go" button on bottom.
>
> If I remove the CD, then I have no access to command prompt
> and Ctrl/Alt/Del does nothing in Ram drive...
>
> I have no "Win Start" button or status bar.(working on adding this)
>
> pappy

BartPE is like a Linux Live version and you can kill the power without
properly shutting down. So you can pull the plug if you want too, since
it is all in RAM anyway. But there under BartPE a start button and there
is an option to shutdown or to reboot if you want too.

--
Bill
Gateway MX6124 ('06 era) - Windows XP SP2

"BillW50" <(E-Mail Removed)> wrote in message
news:%23a1Uet$(E-Mail Removed)...
> In news:OGWeDY$(E-Mail Removed),
> gram pappy typed on Mon, 7 Sep 2009 14:59:17 -0500:
>> "Mark Adams" <(E-Mail Removed)> wrote in message
>> news:BBF5F3D3-02CD-4FDA-B5D5-(E-Mail Removed)...
>>>>
>>>>
>>> "gram pappy" wrote:
>>>
>>> On XP Pro SP2
>>> I have created a LiveCD using the latest BartPE Builder.
>>>
>>> http://www.nu2.nu/pebuilder/
>>>
>>> I used the default builder and is working ok, but I find no
>>> program Exit for a normal boot to XP...
>>> Any links or suggestions?
>>>
>>> pappy
>>>
>>>
>>>> Quite simple. Finish what you are doing with the PE, remove
>>>> the disk from the drive and reboot the machine.
>>>>
>>>>
>> That is the rub, as I have just started the PE build in basic mode.
>> It boots up to Bart's desktop with only a "Go" button on bottom.
>> If I remove the CD, then I have no access to command prompt
>> and Ctrl/Alt/Del does nothing in Ram drive...
>> I have no "Win Start" button or status bar.(working on adding this)
>>
>> pappy
>>
>>
> BartPE is like a Linux Live version and you can kill the power without
> properly shutting down. So you can pull the plug if you want too,
> since it is all in RAM anyway. But there under BartPE a start button
> and there is an option to shutdown or to reboot if you want too.
> --
> Bill
> Gateway MX6124 ('06 era) - Windows XP SP2
>
But if you remove the CD will shutdown or to reboot still work?

pappy