Let's say I backed up entire C: drive to an external USB drive.

Now the old C: drive is headed to the scrap heap and I have a brand new
computer.

How does one transfer backed-up user-files AND downloaded s/w (no CD) to
the new computer?!

Rick Merrill wrote:
> Let's say I backed up entire C: drive to an external USB drive.
>
> Now the old C: drive is headed to the scrap heap and I have a brand
> new computer.
>
> How does one transfer backed-up user-files AND downloaded s/w (no
> CD) to the new computer?!

Use the same external USB drive and reverse whatever you did...

Use Files and Settings Transfer Wizard (and made sure it would work on both
computers before scrapping the old stuff)? Use it n the new computer.

Just copied and pasted the stuff to the USB drive - just copy and paste it
back.

*Fair Warning*: Most Windows applications will have to be reinstalled from
scratch. The files you created, stored, etc - those are fine - but programs
like Microsoft Office, FireFox, Opera, Paint.NET, 7-Zip, Adobe (insert
application here), assorted games, etc and so on; will likely require you to
use the original installation media (executable file and serial number,
CD/DVD and product key, etc) to install them again.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html

You can and should use "Image Backup" software to make a complete backup
of your Windows partition (usually the C: drive) to a USB drive. If you are
just installing the new drive in the same computer then there should be no
problem.
However if you install the drive into a different (new) computer after you
finish the
restore process (using a restore/rescue CD) you may need to perform a
"Repair Install". Therefore I would suggest you put the new drive into
your old PC first and then do the restore, verify your PC boots and there
are no problems, then move the drive to the new PC.

Image backups are stored in a compressed image file which is about 40% less
in size than the amount of space used by the Windows partition (pagefile is
excluded from a backup).

You can also specify the file size break point, so for instance if a full
image backup creates an image file of say 8GB the beak point can be set to
4GB resulting in a split file of 4 GB each which then can be saved to a DVD
or optionally during the Image backup you can specify the DVD drive as the
destination and create the backup directly to DVD media.

You can only Image and Restore FAT32 to FAT32 and NTFS to NTFS.
So for example an image of a FAT32 drive or partition can not be restored
to an NTFS partition on the new drive.

To restore the image backup you created boot from the "Restore/Rescue" CD,
point to the image backup file stored on the USB drive and then start the
restore
to the new drive.

Norton Ghost - has a 30 day trial available
(Trial does not allow you to create a Bootable Restore CD AFAK)
http://www.symantec.com/norton/produ...r&pvid=ghost14
Product Review "Symantec's 14th Ghost":
http://www.softpedia.com/reviews/win...ew-78775.shtml

True Image 2009 - has a 15 day trial version available,
(Trial version can create a Restore CD/Rescue Media)
http://www.acronis.com/homecomputing...cts/trueimage/
User's Guide: http://us1.download.acronis.com/pdf/...ge12_ug.en.pdf

--
JS
http://www.pagestart.com



"Rick Merrill" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Let's say I backed up entire C: drive to an external USB drive.
>
> Now the old C: drive is headed to the scrap heap and I have a brand new
> computer.
>
> How does one transfer backed-up user-files AND downloaded s/w (no CD) to
> the new computer?!

On Sat, 08 Aug 2009 13:27:19 -0400, Rick Merrill
<(E-Mail Removed)> wrote:

> Let's say I backed up entire C: drive to an external USB drive.
>
> Now the old C: drive is headed to the scrap heap and I have a brand new
> computer.
>
> How does one transfer backed-up user-files AND downloaded s/w (no CD) to
> the new computer?!


Simply connect the external backup drive to a USB port on the new
computer and copy all the backed-up *data* files to it, into whatever
folder or folders you want them in.

When you say "downloaded s/w," if you mean the installation files for
the software, and you understand that you will need to reinstall them,
simply do exactly the same thing with those files. Copy the files to a
folder on your new computer's hard drive.

But if you meant the installed software, be aware that--with a very
rare exception--installed software can not be transferred to a new
computer, and has to be reinstalled there. That's because most
software has many entries within the old computer's \windows folder,
in the registry and elsewhere, that won't be on the new computer.

--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup

On Sat, 8 Aug 2009 14:08:41 -0400, "JS" <@> wrote:

>You can and should use "Image Backup" software to make a complete backup
>of your Windows partition (usually the C: drive) to a USB drive. If you are
>just installing the new drive in the same computer then there should be no
>problem.
>However if you install the drive into a different (new) computer after you
>finish the
>restore process (using a restore/rescue CD) you may need to perform a
>"Repair Install". Therefore I would suggest you put the new drive into
>your old PC first and then do the restore, verify your PC boots and there
>are no problems, then move the drive to the new PC.
>
>Image backups are stored in a compressed image file which is about 40% less
>in size than the amount of space used by the Windows partition (pagefile is
>excluded from a backup).
>
>You can also specify the file size break point, so for instance if a full
>image backup creates an image file of say 8GB the beak point can be set to
>4GB resulting in a split file of 4 GB each which then can be saved to a DVD
>or optionally during the Image backup you can specify the DVD drive as the
>destination and create the backup directly to DVD media.
>
>You can only Image and Restore FAT32 to FAT32 and NTFS to NTFS.
>So for example an image of a FAT32 drive or partition can not be restored
>to an NTFS partition on the new drive.
>
>To restore the image backup you created boot from the "Restore/Rescue" CD,
>point to the image backup file stored on the USB drive and then start the
>restore
>to the new drive.
>
>Norton Ghost - has a 30 day trial available
>(Trial does not allow you to create a Bootable Restore CD AFAK)
>http://www.symantec.com/norton/produ...r&pvid=ghost14
>Product Review "Symantec's 14th Ghost":
>http://www.softpedia.com/reviews/win...ew-78775.shtml
>
>True Image 2009 - has a 15 day trial version available,
>(Trial version can create a Restore CD/Rescue Media)
>http://www.acronis.com/homecomputing...cts/trueimage/
>User's Guide: http://us1.download.acronis.com/pdf/...ge12_ug.en.pdf

May I thoroughly recommend Acronis True Image - Just did exactly as
you describe - A cloned HD through the USB port using a caddy - Worked
perfectly so now have the old HD with all the info on it -

Superb back-ups too - though it does take 9 hours for a full back-up.


Richard from London UK -- (E-Mail Removed)
Bambi,Beauty,Brian(Brutus 77-97 Bessie 87-01 Ben 95-06 @ RB)
Greyhounds are for life not just for racing!!
Whittingham Homefinding Scheme
Visit our Kennels
http://homepage.ntlworld.com/greyhounds
www.whittinghamretiredgreyhounds.co.uk

On Sun, 09 Aug 2009 08:44:37 +0100, Richard Lobb
<(E-Mail Removed)> wrote:


> May I thoroughly recommend Acronis True Image - Just did exactly as
> you describe - A cloned HD through the USB port using a caddy - Worked
> perfectly so now have the old HD with all the info on it -
>
> Superb back-ups too - though it does take 9 hours for a full back-up.


Let me point out that the amount of time it (or any other such
program) takes is dependent upon how much you have to back up and the
speed of the drives. It is not necessarily anywhere near 9 hours.

--
Ken Blake, Microsoft MVP - Windows Desktop Experience
Please Reply to the Newsgroup

"Ken Blake, MVP" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)
> On Sat, 08 Aug 2009 13:27:19 -0400, Rick Merrill
> <(E-Mail Removed)> wrote:
>
>> Let's say I backed up entire C: drive to an external USB drive.
>>
>> Now the old C: drive is headed to the scrap heap and I have a brand
>> new computer.
>>
>> How does one transfer backed-up user-files AND downloaded s/w (no
>> CD) to the new computer?!
>
>
> Simply connect the external backup drive to a USB port on the new
> computer and copy all the backed-up *data* files to it, into whatever
> folder or folders you want them in.
>
> When you say "downloaded s/w," if you mean the installation files for
> the software, and you understand that you will need to reinstall them,
> simply do exactly the same thing with those files. Copy the files to a
> folder on your new computer's hard drive.
>
> But if you meant the installed software, be aware that--with a very
> rare exception--installed software can not be transferred to a new
> computer, and has to be reinstalled there. That's because most
> software has many entries within the old computer's \windows folder,
> in the registry and elsewhere, that won't be on the new computer.

Unless the two pieces of hardware are identical, the registries aren't
going to match, a repair install may well be necessary if it'll help at
all, plus XP is likely to start wanting to be activated again. Using
imaging software is going to give the registry of the old computer on
the new computer; not a minor detail. If it's used, EFS will stop
working, too unless certs were exported.

Twayne`

On Sun, 09 Aug 2009 06:55:00 -0700, "Ken Blake, MVP"
<(E-Mail Removed)> wrote:

>On Sun, 09 Aug 2009 08:44:37 +0100, Richard Lobb
><(E-Mail Removed)> wrote:
>
>
>> May I thoroughly recommend Acronis True Image - Just did exactly as
>> you describe - A cloned HD through the USB port using a caddy - Worked
>> perfectly so now have the old HD with all the info on it -
>>
>> Superb back-ups too - though it does take 9 hours for a full back-up.
>
>
>Let me point out that the amount of time it (or any other such
>program) takes is dependent upon how much you have to back up and the
>speed of the drives. It is not necessarily anywhere near 9 hours.

Absolutely - but many places and programs recommend doing full
back-ups OVERNIGHT - so it is very usual for a back up to take a good
number of hours to do. Generally a 'mature' computer will take a good
few hours to fully back up.

You forgot to mention the speed of the transfer medium too - a USB 1
protocol will generally be slower than USB 2 protocol. A HD to HD
transfer inside the computer is far faster - this is true for the same
drives - but USB transfer is VERY convenient - and as I said Acronis
makes it very easy. as it will cope with all protocols and
arrangements
..

Richard from London UK -- (E-Mail Removed)
Bambi,Beauty,Brian(Brutus 77-97 Bessie 87-01 Ben 95-06 @ RB)
Greyhounds are for life not just for racing!!
Whittingham Homefinding Scheme
Visit our Kennels
http://homepage.ntlworld.com/greyhounds
www.whittinghamretiredgreyhounds.co.uk