Hi,

Before installing the XPE image, I need to partitionning
and formating the disk.
I never the same disk, I don't use SDI installation.
How prepare the disk automaticly with a small XPE RAM
image ? (My Client RemoteBoot with a RAM XPE image. After,
the Ram Image prepare the disk, copy the target image on
the Client and finish the installation).

Thks.

Use diskpart with command script file that will create partitions and set
active partition.
use format to create NTFS file system if acceptable to you. For FAT you need
to do some extra steps.

But most problems you will have is to prepare RAM XPE image, to allow you
direct access to your HDD.
I have done this but I don't know clean solution to this problem using only
TD for creating RAM XPE image.

If you need more help be more specific to what exact problem you need it.

Best regards,
Slobodan


"Michel REYDET" <(E-Mail Removed)> wrote in message
news:084301c39556$d90c3d90$(E-Mail Removed)...
> Hi,
>
> Before installing the XPE image, I need to partitionning
> and formating the disk.
> I never the same disk, I don't use SDI installation.
> How prepare the disk automaticly with a small XPE RAM
> image ? (My Client RemoteBoot with a RAM XPE image. After,
> the Ram Image prepare the disk, copy the target image on
> the Client and finish the installation).
>
> Thks.