Hello !

In an XPE application, I am using autologon. It is working perfectly until I
add the System Cloning Tool.
When the System Cloning Tool is added, I can deploy images to FLASH, but
when booting my image,
the "click user name" screen is displayed.

Why does autologon not work here ?

brgds

Carl Johan Jensen

Carl,

Open your configuration in TD. Highlight the "System Cloning Tool"
component. In the right hand pane you will see the "advanced" button. Click
that. In the "Extended Properties" for the component you will see several
entries, one of which is "cmiRemoveUserSettings". Highlight, click edit,
change to false, click OK, click Close. There are other settings as well in
there for you to experiment with. There are also switches for fbreseal. (ex.
/keepall). Another important entry in the "Extended Properties" is
"cmiResealPhase". Set this to 0 to manually reseal the image after you have
configured it properly.

HTH,
--
Brad Combs
Imago Technologies, LLC

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com/...ity/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Carl Johan Jensen" <(E-Mail Removed)> wrote in message
news:e9Gf%(E-Mail Removed)...
> Hello !
>
> In an XPE application, I am using autologon. It is working perfectly until
I
> add the System Cloning Tool.
> When the System Cloning Tool is added, I can deploy images to FLASH, but
> when booting my image,
> the "click user name" screen is displayed.
>
> Why does autologon not work here ?
>
> brgds
>
> Carl Johan Jensen
>
>

Thanks, it worked perfectly.

"Brad Combs" wrote:

> Carl,
>
> Open your configuration in TD. Highlight the "System Cloning Tool"
> component. In the right hand pane you will see the "advanced" button. Click
> that. In the "Extended Properties" for the component you will see several
> entries, one of which is "cmiRemoveUserSettings". Highlight, click edit,
> change to false, click OK, click Close. There are other settings as well in
> there for you to experiment with. There are also switches for fbreseal. (ex.
> /keepall). Another important entry in the "Extended Properties" is
> "cmiResealPhase". Set this to 0 to manually reseal the image after you have
> configured it properly.
>
> HTH,
> --
> Brad Combs
> Imago Technologies, LLC
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
> Microsoft!
> https://www.windowsembeddedeval.com/...ity/newsgroups
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> "Carl Johan Jensen" <(E-Mail Removed)> wrote in message
> news:e9Gf%(E-Mail Removed)...
> > Hello !
> >
> > In an XPE application, I am using autologon. It is working perfectly until
> I
> > add the System Cloning Tool.
> > When the System Cloning Tool is added, I can deploy images to FLASH, but
> > when booting my image,
> > the "click user name" screen is displayed.
> >
> > Why does autologon not work here ?
> >
> > brgds
> >
> > Carl Johan Jensen
> >
> >
>
>
>

Thank You for Your help

Where can I read about this. The TD Help does not tell anything about the
System Cloning Tool, neither does
Microsoft embedded pages ?

brgds

Carl Johan Jensen


"Brad Combs" <(E-Mail Removed)> wrote in message
news:%23PCJ$(E-Mail Removed)...
> Carl,
>
> Open your configuration in TD. Highlight the "System Cloning Tool"
> component. In the right hand pane you will see the "advanced" button.
Click
> that. In the "Extended Properties" for the component you will see several
> entries, one of which is "cmiRemoveUserSettings". Highlight, click edit,
> change to false, click OK, click Close. There are other settings as well
in
> there for you to experiment with. There are also switches for fbreseal.
(ex.
> /keepall). Another important entry in the "Extended Properties" is
> "cmiResealPhase". Set this to 0 to manually reseal the image after you
have
> configured it properly.
>
> HTH,
> --
> Brad Combs
> Imago Technologies, LLC
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Have an opinion on the effectiveness of Microsoft Embedded newsgroups?
Tell
> Microsoft!
> https://www.windowsembeddedeval.com/...ity/newsgroups
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> "Carl Johan Jensen" <(E-Mail Removed)> wrote in message
> news:e9Gf%(E-Mail Removed)...
> > Hello !
> >
> > In an XPE application, I am using autologon. It is working perfectly
until
> I
> > add the System Cloning Tool.
> > When the System Cloning Tool is added, I can deploy images to FLASH,
but
> > when booting my image,
> > the "click user name" screen is displayed.
> >
> > Why does autologon not work here ?
> >
> > brgds
> >
> > Carl Johan Jensen
> >
> >
>
>

Sure, there's lots of help on System Cloning.

There's this KB Article:
http://support.microsoft.com/default...b;en-us;810144 which
includes a link to a hotfix for the cloning tool.

And especially this Help content which is the same information in the help
files on your development machine:
http://msdn.microsoft.com/library/de...concloning.asp

Andy
--

This posting is provided "AS IS" with no warranties, and confers no rights.
==========================================================


"Carl Johan Jensen" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Thank You for Your help
>
> Where can I read about this. The TD Help does not tell anything about the
> System Cloning Tool, neither does
> Microsoft embedded pages ?
>
> brgds
>
> Carl Johan Jensen
>
>
> "Brad Combs" <(E-Mail Removed)> wrote in message
> news:%23PCJ$(E-Mail Removed)...
> > Carl,
> >
> > Open your configuration in TD. Highlight the "System Cloning Tool"
> > component. In the right hand pane you will see the "advanced" button.
> Click
> > that. In the "Extended Properties" for the component you will see
several
> > entries, one of which is "cmiRemoveUserSettings". Highlight, click edit,
> > change to false, click OK, click Close. There are other settings as well
> in
> > there for you to experiment with. There are also switches for fbreseal.
> (ex.
> > /keepall). Another important entry in the "Extended Properties" is
> > "cmiResealPhase". Set this to 0 to manually reseal the image after you
> have
> > configured it properly.
> >
> > HTH,
> > --
> > Brad Combs
> > Imago Technologies, LLC
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Have an opinion on the effectiveness of Microsoft Embedded newsgroups?
> Tell
> > Microsoft!
> > https://www.windowsembeddedeval.com/...ity/newsgroups
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > "Carl Johan Jensen" <(E-Mail Removed)> wrote in message
> > news:e9Gf%(E-Mail Removed)...
> > > Hello !
> > >
> > > In an XPE application, I am using autologon. It is working perfectly
> until
> > I
> > > add the System Cloning Tool.
> > > When the System Cloning Tool is added, I can deploy images to FLASH,
> but
> > > when booting my image,
> > > the "click user name" screen is displayed.
> > >
> > > Why does autologon not work here ?
> > >
> > > brgds
> > >
> > > Carl Johan Jensen
> > >
> > >
> >
> >
>
>

Actually, initial TD (SP1) helps did not have much info on System Cloning Tool.
But XPe Platform Help did. So, open this file "\Program Files\Windows Embedded\help\xpehelp.chm" and type "Cloning" in search.

Also, install this QFE (XPe doc update for SP1):
http://www.microsoft.com/downloads/d...DisplayLang=en. And you will get more
info in TD help even about System Cloning.

--
Regards,
KM, BSquare Corp.


> Sure, there's lots of help on System Cloning.
>
> There's this KB Article:
> http://support.microsoft.com/default...b;en-us;810144 which
> includes a link to a hotfix for the cloning tool.
>
> And especially this Help content which is the same information in the help
> files on your development machine:
> http://msdn.microsoft.com/library/de...concloning.asp
>
> Andy
> --
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
> ==========================================================
>
>
> "Carl Johan Jensen" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
> > Thank You for Your help
> >
> > Where can I read about this. The TD Help does not tell anything about the
> > System Cloning Tool, neither does
> > Microsoft embedded pages ?
> >
> > brgds
> >
> > Carl Johan Jensen
> >
> >
> > "Brad Combs" <(E-Mail Removed)> wrote in message
> > news:%23PCJ$(E-Mail Removed)...
> > > Carl,
> > >
> > > Open your configuration in TD. Highlight the "System Cloning Tool"
> > > component. In the right hand pane you will see the "advanced" button.
> > Click
> > > that. In the "Extended Properties" for the component you will see
> several
> > > entries, one of which is "cmiRemoveUserSettings". Highlight, click edit,
> > > change to false, click OK, click Close. There are other settings as well
> > in
> > > there for you to experiment with. There are also switches for fbreseal.
> > (ex.
> > > /keepall). Another important entry in the "Extended Properties" is
> > > "cmiResealPhase". Set this to 0 to manually reseal the image after you
> > have
> > > configured it properly.
> > >
> > > HTH,
> > > --
> > > Brad Combs
> > > Imago Technologies, LLC
> > >
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > Have an opinion on the effectiveness of Microsoft Embedded newsgroups?
> > Tell
> > > Microsoft!
> > > https://www.windowsembeddedeval.com/...ity/newsgroups
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > >
> > > "Carl Johan Jensen" <(E-Mail Removed)> wrote in message
> > > news:e9Gf%(E-Mail Removed)...
> > > > Hello !
> > > >
> > > > In an XPE application, I am using autologon. It is working perfectly
> > until
> > > I
> > > > add the System Cloning Tool.
> > > > When the System Cloning Tool is added, I can deploy images to FLASH,
> > but
> > > > when booting my image,
> > > > the "click user name" screen is displayed.
> > > >
> > > > Why does autologon not work here ?
> > > >
> > > > brgds
> > > >
> > > > Carl Johan Jensen
> > > >
> > > >
> > >
> > >
> >
> >
>
>