Hello,

Has anyone gotten a good setting for this? I'm using the 4.7 drivers and
couldn't find a good resolution that shows the entire display. I typically
have a good amount of the top, and sides cut off. I tried powerstrip and
got slightly better results - I think the resolution was something like 17xx
by 1000 that came closest to fitting everything on my screen. My format
button for my TV only gives me a choice between 1080i standard and wide when
I use the DVI input from my PC with the 9600 pro in it and of course wide
stretches it out even further. If you have settings that work well, I would
really appreciate the info. I spent about 1 1/2 hours just getting it close
to acceptable but I hate having anything cut off. I can't check my
settings for sure unless I haul the unit over to my TV but I believe I was
using the Sony GDM- FW900 or 900 to get it close to the right properties for
the TV. I couldn't find any drivers for the TV - I tried genericTV no luck
and I tried force TV detection in the ATI control panel - no luck.

I got an e-mail back from Mits regarding getting custom drivers for Windows
XP. They told me to call the MDEA Operational Assistance Representatives at
866-252-4333. The person I spoke to wasn't well versed in drivers but I
realize that not everyone you speak to is seasoned in their products or even
information available within their company.

I figure if we get enough calls going they will either look into the matter
or get someone to work on the issue. I'm still returning e-mails with them
so hopefully I'll get some more info if anyone is interested.


"boe" <(E-Mail Removed)> wrote in message
news:HovLc.155576$Oq2.145252@attbi_s52...
> Hello,
>
> Has anyone gotten a good setting for this? I'm using the 4.7 drivers and
> couldn't find a good resolution that shows the entire display. I
typically
> have a good amount of the top, and sides cut off. I tried powerstrip and
> got slightly better results - I think the resolution was something like
17xx
> by 1000 that came closest to fitting everything on my screen. My format
> button for my TV only gives me a choice between 1080i standard and wide
when
> I use the DVI input from my PC with the 9600 pro in it and of course wide
> stretches it out even further. If you have settings that work well, I
would
> really appreciate the info. I spent about 1 1/2 hours just getting it
close
> to acceptable but I hate having anything cut off. I can't check my
> settings for sure unless I haul the unit over to my TV but I believe I was
> using the Sony GDM- FW900 or 900 to get it close to the right properties
for
> the TV. I couldn't find any drivers for the TV - I tried genericTV no
luck
> and I tried force TV detection in the ATI control panel - no luck.
>
>
>

I've also been e-mailing to (E-Mail Removed) if anyone wants to give
that a try.


"boe" <(E-Mail Removed)> wrote in message
news:HovLc.155576$Oq2.145252@attbi_s52...
> Hello,
>
> Has anyone gotten a good setting for this? I'm using the 4.7 drivers and
> couldn't find a good resolution that shows the entire display. I
typically
> have a good amount of the top, and sides cut off. I tried powerstrip and
> got slightly better results - I think the resolution was something like
17xx
> by 1000 that came closest to fitting everything on my screen. My format
> button for my TV only gives me a choice between 1080i standard and wide
when
> I use the DVI input from my PC with the 9600 pro in it and of course wide
> stretches it out even further. If you have settings that work well, I
would
> really appreciate the info. I spent about 1 1/2 hours just getting it
close
> to acceptable but I hate having anything cut off. I can't check my
> settings for sure unless I haul the unit over to my TV but I believe I was
> using the Sony GDM- FW900 or 900 to get it close to the right properties
for
> the TV. I couldn't find any drivers for the TV - I tried genericTV no
luck
> and I tried force TV detection in the ATI control panel - no luck.
>
>
>