When I boot up cold all my graphics are garbled up.. But after 2-3 reboots it runs fine. Even the motherboard splash screen is messed up on cold boot. Just started doing this a few days ago. I've had the card 2 months..

have you tried vacuuming out your power supply ?

after two three times (you don't say what your OS is) Windows XP pro will "sort out" any
conflicts it has (most of the time). like the 9800 could be walking over the network card
or sound card, on boot up - your bios info could be different than what windows wants to
do radically (how is your bios battery). One way to tell about your bios, is to unplug
the PC from the wall, then with this box off - go to the mall or something, then come back
and plug you PC back in. IF your bios is zeroed (no big deal - it'll just re pnp) then you
should be able to see if it can't hold the bios info (dead batt). ** note: if you do try
this - go into your bios and write the settings down, so you might have to manually put
then back in. especially if you like to tweak the bios. If you have extra pci slots try
moving one of the cards i mentioned (big time assumptions here) just assuming these would
be standard fare for todays PC's.

you power supply could be marginal - you don't say what your wattage is. I have a 450watt
and a 500 watt server power supply in my PC's.

** No Fate **

cheers,
dracman
Tomb Raider: Shotgun City
http://www.smokeypoint.com/tomb.htm
http://www.smokeypoint.org/traod/traod.html

**savegame editors all versions Tomb Raider & TRAOD godmode
http://www.smokeypoint.com/tr2code.htm

http://www.smokeypoint.com/tombraide...r1pictures.htm
http://www.smokeypoint.com/3dfx.htm
http://www.smokeypoint.com/banshee.html
http://www.smokeypoint.com/My_PC.htm
http://www.smokeypoint.com/tomb2.htm#Tova

** GTA III vice City Character MOD
http://www.smokeypoint.com/uzi.htm#gta3

NFS: drive at the limits of tyre adhesion ! snag Lara's Croftraider IV sports car ! !
NFS3:NFS4
http://www.smokeypoint.com/3dfx.htm#raider

http://www.smokeypoint.com/3dfx.htm#blondstranger
NFS:HS - Reg method to add your d3d card to NFS:HS
NFS III - Reg method to add your d3d card to NFS:HP
-=-=-


<(E-Mail Removed)> wrote in message news:7UHec.50$fq4.26@lakeread05...
: When I boot up cold all my graphics are garbled up.. But after 2-3 reboots it runs
fine. Even the motherboard splash screen is messed up on cold boot. Just started doing
this a few days ago. I've had the card 2 months..
:
:




.................................................................
Posted via TITANnews - Uncensored Newsgroups Access
>>>> at http://www.TitanNews.com <<<<
-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-

Before you do anything, double check to see if the Video card is tightly in
place? Not sure if it is try pulling it out and placing back in until you
hear a subtle click into place. Make sure the Monitor cable firmly in place
as well?

<(E-Mail Removed)> wrote in message
news:7UHec.50$fq4.26@lakeread05...
> When I boot up cold all my graphics are garbled up.. But after 2-3
reboots it runs fine. Even the motherboard splash screen is messed up on
cold boot. Just started doing this a few days ago. I've had the card 2
months..
>
>