I have an asus p2b rev. 1012, ms6095 master adapter slot 1 fc pga , a
pentium III fc pga 700 mhz, 1,7 volt, 100 mhz. Could you help me how to
set the jumpers on the adapter so that it will boot? Thanx a lot. Bye,
Mimmo

Mimmo wrote:
> I have an asus p2b rev. 1012, ms6095 master adapter slot 1 fc pga , a
> pentium III fc pga 700 mhz, 1,7 volt, 100 mhz. Could you help me how to
> set the jumpers on the adapter so that it will boot? Thanx a lot. Bye,
> Mimmo
>

You may need to set the voltage to at least 1.8 volts - I think at least
some of those old boards don't support any lower voltage.

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from (E-Mail Removed)
Home Page: http://www.roberthancock.com/