Yes I enabled USB in the BIOS. I've also tried 3
different versions of the P2B-DS BIOS (one was sent to me
from their support group). I've also tried XP and 98 SE.
I've tried booting from SCSI, as well as removing SCSI and
going with only IDE. All my USB devices are seen, and I
can load the drivers, however I cannot communicate with
them. When explorer looks at the memory card in my camera
it says the drive is not formatted. But when I use the
exact same software and hardware on a different machine,
everything works fine.
>-----Original Message-----
>I have a straight P2B and it works fine under XP. Did
you enable the USB in
>the BIOS?
>
>"Joe Lambert" <(E-Mail Removed)> wrote in message
>news:070101c38151$7cd1bc80$(E-Mail Removed)...
>>
>> Does anyone know if Windows XP supports USB on the ASUS
>> P2B-DS motherboard. The USB drivers load, however none
of
>> the USB devices will work. Device Manager show no
>> conflicts, however when I try to access any USB devices,
>> the connection lights go out on the hub and the devices
>> can't be reached. I've tried booting with only SCSI,
then
>> only IDE. I've updated the BIOS, tested all the USB
>> hardware and hub, still USB does not work with Windows
>> XP. Does anyone else have this motherboard working with
>> XP?
>>
>> Joe
>>
>
>
>.
>
|
Similar Threads
