Hi all

Bought the following

Asus K8V SE Deluxe mobo, Athlon 64bit 3400 (retail), Antec True Power 330,
Seagate SATA 160 and Kingston 512 Ram. I am using other old components e.g.
Pioneer DVD rewriter and Gainward MX 440.

The problem is this- I plugged in all the bear components- PSU (both the ATX
and ATX12V are plugged in), CPU, video card and RAM. The PC will not power
up. If I remove the ATX 12V the CPU fan and PSU would come alive and that's
about it. The green LED on the board indicates that it's working.

I have already RMAd the motherboard in which the suppier confirmed that I
had a dodgy unit but the replacement is doing the exactly the same thing.
Could this be yet another dodgy board? I know there is nothing wrong with
the PSU as I have tested it on another system. If the CPU is faulty I would
at least expect the PC to boot through the bios post etc.

Am I doing something wrong or do I need to return it yet again?

TIA

I have the same Mainboard - What PSU you using i.e Wattage

"MC" <(E-Mail Removed)> wrote in message
news:hHwJd.175$(E-Mail Removed)...
> Hi all
>
> Bought the following
>
> Asus K8V SE Deluxe mobo, Athlon 64bit 3400 (retail), Antec True Power 330,
> Seagate SATA 160 and Kingston 512 Ram. I am using other old components
> e.g.
> Pioneer DVD rewriter and Gainward MX 440.
>
> The problem is this- I plugged in all the bear components- PSU (both the
> ATX
> and ATX12V are plugged in), CPU, video card and RAM. The PC will not power
> up. If I remove the ATX 12V the CPU fan and PSU would come alive and
> that's
> about it. The green LED on the board indicates that it's working.
>
> I have already RMAd the motherboard in which the suppier confirmed that I
> had a dodgy unit but the replacement is doing the exactly the same thing.
> Could this be yet another dodgy board? I know there is nothing wrong with
> the PSU as I have tested it on another system. If the CPU is faulty I
> would
> at least expect the PC to boot through the bios post etc.
>
> Am I doing something wrong or do I need to return it yet again?
>
> TIA
>
>

It's an Antec True Power 330W. I know this isn't high but with only the bear
components attached I would expect it to at least boot up.
BTW did you have problems getting your mobo to work?


Thanks


"JOni" <(E-Mail Removed)> wrote in message
news:ct65ak$4jk$(E-Mail Removed)...
> I have the same Mainboard - What PSU you using i.e Wattage
>
> "MC" <(E-Mail Removed)> wrote in message
> news:hHwJd.175$(E-Mail Removed)...
> > Hi all
> >
> > Bought the following
> >
> > Asus K8V SE Deluxe mobo, Athlon 64bit 3400 (retail), Antec True Power
330,
> > Seagate SATA 160 and Kingston 512 Ram. I am using other old components
> > e.g.
> > Pioneer DVD rewriter and Gainward MX 440.
> >
> > The problem is this- I plugged in all the bear components- PSU (both the
> > ATX
> > and ATX12V are plugged in), CPU, video card and RAM. The PC will not
power
> > up. If I remove the ATX 12V the CPU fan and PSU would come alive and
> > that's
> > about it. The green LED on the board indicates that it's working.
> >
> > I have already RMAd the motherboard in which the suppier confirmed that
I
> > had a dodgy unit but the replacement is doing the exactly the same
thing.
> > Could this be yet another dodgy board? I know there is nothing wrong
with
> > the PSU as I have tested it on another system. If the CPU is faulty I
> > would
> > at least expect the PC to boot through the bios post etc.
> >
> > Am I doing something wrong or do I need to return it yet again?
> >
> > TIA
> >
> >
>
>

I had no probs with a 500 Watt
Have you tried to fire up with the bare minimum connected.


"MC" <(E-Mail Removed)> wrote in message
news:xxxJd.229$(E-Mail Removed)...
> It's an Antec True Power 330W. I know this isn't high but with only the
> bear
> components attached I would expect it to at least boot up.
> BTW did you have problems getting your mobo to work?
>
>
> Thanks
>
>
> "JOni" <(E-Mail Removed)> wrote in message
> news:ct65ak$4jk$(E-Mail Removed)...
>> I have the same Mainboard - What PSU you using i.e Wattage
>>
>> "MC" <(E-Mail Removed)> wrote in message
>> news:hHwJd.175$(E-Mail Removed)...
>> > Hi all
>> >
>> > Bought the following
>> >
>> > Asus K8V SE Deluxe mobo, Athlon 64bit 3400 (retail), Antec True Power
> 330,
>> > Seagate SATA 160 and Kingston 512 Ram. I am using other old components
>> > e.g.
>> > Pioneer DVD rewriter and Gainward MX 440.
>> >
>> > The problem is this- I plugged in all the bear components- PSU (both
>> > the
>> > ATX
>> > and ATX12V are plugged in), CPU, video card and RAM. The PC will not
> power
>> > up. If I remove the ATX 12V the CPU fan and PSU would come alive and
>> > that's
>> > about it. The green LED on the board indicates that it's working.
>> >
>> > I have already RMAd the motherboard in which the suppier confirmed that
> I
>> > had a dodgy unit but the replacement is doing the exactly the same
> thing.
>> > Could this be yet another dodgy board? I know there is nothing wrong
> with
>> > the PSU as I have tested it on another system. If the CPU is faulty I
>> > would
>> > at least expect the PC to boot through the bios post etc.
>> >
>> > Am I doing something wrong or do I need to return it yet again?
>> >
>> > TIA
>> >
>> >
>>
>>
>
>

Yup! Connected CPU, RAM and video card. And of course both the ATX and
ATX12V. The damn thing will not fire up but if I remove the ATX12V, the PSU
and CPU fans would work!!! But there no beep codes. This is a very first and
maybe the last experience I may have with Asus 'cos I have requested for
another RMA and will be swapping for a Gigabyte instead which all my
previous system have been in the past without any problems.

Thanks again.


"JOni" <(E-Mail Removed)> wrote in message
news:ct6e6v$aed$(E-Mail Removed)...
> I had no probs with a 500 Watt
> Have you tried to fire up with the bare minimum connected.
>
>
> "MC" <(E-Mail Removed)> wrote in message
> news:xxxJd.229$(E-Mail Removed)...
> > It's an Antec True Power 330W. I know this isn't high but with only the
> > bear
> > components attached I would expect it to at least boot up.
> > BTW did you have problems getting your mobo to work?
> >
> >
> > Thanks
> >
> >
> > "JOni" <(E-Mail Removed)> wrote in message
> > news:ct65ak$4jk$(E-Mail Removed)...
> >> I have the same Mainboard - What PSU you using i.e Wattage
> >>
> >> "MC" <(E-Mail Removed)> wrote in message
> >> news:hHwJd.175$(E-Mail Removed)...
> >> > Hi all
> >> >
> >> > Bought the following
> >> >
> >> > Asus K8V SE Deluxe mobo, Athlon 64bit 3400 (retail), Antec True Power
> > 330,
> >> > Seagate SATA 160 and Kingston 512 Ram. I am using other old
components
> >> > e.g.
> >> > Pioneer DVD rewriter and Gainward MX 440.
> >> >
> >> > The problem is this- I plugged in all the bear components- PSU (both
> >> > the
> >> > ATX
> >> > and ATX12V are plugged in), CPU, video card and RAM. The PC will not
> > power
> >> > up. If I remove the ATX 12V the CPU fan and PSU would come alive and
> >> > that's
> >> > about it. The green LED on the board indicates that it's working.
> >> >
> >> > I have already RMAd the motherboard in which the suppier confirmed
that
> > I
> >> > had a dodgy unit but the replacement is doing the exactly the same
> > thing.
> >> > Could this be yet another dodgy board? I know there is nothing wrong
> > with
> >> > the PSU as I have tested it on another system. If the CPU is faulty I
> >> > would
> >> > at least expect the PC to boot through the bios post etc.
> >> >
> >> > Am I doing something wrong or do I need to return it yet again?
> >> >
> >> > TIA
> >> >
> >> >
> >>
> >>
> >
> >
>
>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Tue, 25 Jan 2005 22:04:19 GMT, MC wrote:

> Yup! Connected CPU, RAM and video card. And of course both the
ATX and
> ATX12V. The damn thing will not fire up but if I remove the
ATX12V, the PSU
> and CPU fans would work!!! But there no beep codes. This is a
very first and
> maybe the last experience I may have with Asus 'cos I have
requested for
> another RMA and will be swapping for a Gigabyte instead which
all my
> previous system have been in the past without any problems.
>
>
Well, I have used ASUS for a long time. Only had one problem -
interestingly enough it was with a Via chipset board. All my
nVidia based ones have been a dream.

One thing I would recommend checking is if that PSU actually
meets the minimum requirements for the board. The reason I ask
is that my FIRST motherboard upgrade I ever did myself was like
your experiance:

I had an old 250W PSU from 1999. It was 2002 and I was upgrading
to an XP 2400+. I didn't notice, but the board required a 300W
Minimum, so I had a similar experiance. I put in a 400W and it
worked fine. 330W is quite low, and figuring the time, it may
actually require more to power up the videocard and board.

The other weird thing that happened to me was when I passed that
old board on in 2003. It worked fine for a year or so for me, I
passed it to my sister as I was upgrading, and it just didn't
turn on. We RMA'd it, and got a different board back, and she
just couldn't get it to work either. Never figured out why. I
just passed her my old (upgraded again lol) nVidia based ASUS
board and works fine in her PC.

The basic moral of my story here is that many people have good
experiances with ASUS, but a few have some setup or "bad karma"
or something that makes it not work. Probably like all
manufacturers there are bad batches. Part 2 of the moral is the
problems I had stopped when I stopped getting Via based boards.
I don't have a technical reason why, I'm not saying it's via
(though some will) nor that the failure is on ASUS's part (some
will say that as well.

jp10558
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32) - GPGshell v3.30

iD8DBQFB9sfBMA6GdHjsAuARAgA9AJ446xDMJotEhyO8NuV44tepMeQr1gCghUkk
npACltVD389y4FQY+oopR8o=
=TgzR
-----END PGP SIGNATURE-----

Thanks for your reply. I agree 330W is quite low- the board's minimum is
300W and recommended is 350W. I managed to borrow a brand new Antec
SmartPower 350W and it still won't boot, so I doubt it is the PSU.

Thanks for reminding



"jp10558" <osm1-(E-Mail Removed)> wrote in message
news:1106692052.ceafde0235db53d905ed7fdebdade3a6@teranews...
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Tue, 25 Jan 2005 22:04:19 GMT, MC wrote:
>
> > Yup! Connected CPU, RAM and video card. And of course both the
> ATX and
> > ATX12V. The damn thing will not fire up but if I remove the
> ATX12V, the PSU
> > and CPU fans would work!!! But there no beep codes. This is a
> very first and
> > maybe the last experience I may have with Asus 'cos I have
> requested for
> > another RMA and will be swapping for a Gigabyte instead which
> all my
> > previous system have been in the past without any problems.
> >
> >
> Well, I have used ASUS for a long time. Only had one problem -
> interestingly enough it was with a Via chipset board. All my
> nVidia based ones have been a dream.
>
> One thing I would recommend checking is if that PSU actually
> meets the minimum requirements for the board. The reason I ask
> is that my FIRST motherboard upgrade I ever did myself was like
> your experiance:
>
> I had an old 250W PSU from 1999. It was 2002 and I was upgrading
> to an XP 2400+. I didn't notice, but the board required a 300W
> Minimum, so I had a similar experiance. I put in a 400W and it
> worked fine. 330W is quite low, and figuring the time, it may
> actually require more to power up the videocard and board.
>
> The other weird thing that happened to me was when I passed that
> old board on in 2003. It worked fine for a year or so for me, I
> passed it to my sister as I was upgrading, and it just didn't
> turn on. We RMA'd it, and got a different board back, and she
> just couldn't get it to work either. Never figured out why. I
> just passed her my old (upgraded again lol) nVidia based ASUS
> board and works fine in her PC.
>
> The basic moral of my story here is that many people have good
> experiances with ASUS, but a few have some setup or "bad karma"
> or something that makes it not work. Probably like all
> manufacturers there are bad batches. Part 2 of the moral is the
> problems I had stopped when I stopped getting Via based boards.
> I don't have a technical reason why, I'm not saying it's via
> (though some will) nor that the failure is on ASUS's part (some
> will say that as well.
>
> jp10558
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.0 (MingW32) - GPGshell v3.30
>
> iD8DBQFB9sfBMA6GdHjsAuARAgA9AJ446xDMJotEhyO8NuV44tepMeQr1gCghUkk
> npACltVD389y4FQY+oopR8o=
> =TgzR
> -----END PGP SIGNATURE-----

MC wrote:
>
> Thanks for your reply. I agree 330W is quite low- the board's minimum is
> 300W and recommended is 350W. I managed to borrow a brand new Antec
> SmartPower 350W and it still won't boot, so I doubt it is the PSU.
>
> Thanks for reminding
>
> "jp10558" <osm1-(E-Mail Removed)> wrote in message
> news:1106692052.ceafde0235db53d905ed7fdebdade3a6@teranews...
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > On Tue, 25 Jan 2005 22:04:19 GMT, MC wrote:
> >
> > > Yup! Connected CPU, RAM and video card. And of course both the
> > ATX and
> > > ATX12V. The damn thing will not fire up but if I remove the
> > ATX12V, the PSU
> > > and CPU fans would work!!! But there no beep codes. This is a
> > very first and
> > > maybe the last experience I may have with Asus 'cos I have
> > requested for
> > > another RMA and will be swapping for a Gigabyte instead which
> > all my
> > > previous system have been in the past without any problems.
> > >
> > >
> > Well, I have used ASUS for a long time. Only had one problem -
> > interestingly enough it was with a Via chipset board. All my
> > nVidia based ones have been a dream.
> >
> > One thing I would recommend checking is if that PSU actually
> > meets the minimum requirements for the board. The reason I ask
> > is that my FIRST motherboard upgrade I ever did myself was like
> > your experiance:
> >
> > I had an old 250W PSU from 1999. It was 2002 and I was upgrading
> > to an XP 2400+. I didn't notice, but the board required a 300W
> > Minimum, so I had a similar experiance. I put in a 400W and it
> > worked fine. 330W is quite low, and figuring the time, it may
> > actually require more to power up the videocard and board.
> >
> > The other weird thing that happened to me was when I passed that
> > old board on in 2003. It worked fine for a year or so for me, I
> > passed it to my sister as I was upgrading, and it just didn't
> > turn on. We RMA'd it, and got a different board back, and she
> > just couldn't get it to work either. Never figured out why. I
> > just passed her my old (upgraded again lol) nVidia based ASUS
> > board and works fine in her PC.
> >
> > The basic moral of my story here is that many people have good
> > experiances with ASUS, but a few have some setup or "bad karma"
> > or something that makes it not work. Probably like all
> > manufacturers there are bad batches. Part 2 of the moral is the
> > problems I had stopped when I stopped getting Via based boards.
> > I don't have a technical reason why, I'm not saying it's via
> > (though some will) nor that the failure is on ASUS's part (some
> > will say that as well.
> >
> > jp10558
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.4.0 (MingW32) - GPGshell v3.30
> >
> > iD8DBQFB9sfBMA6GdHjsAuARAgA9AJ446xDMJotEhyO8NuV44tepMeQr1gCghUkk
> > npACltVD389y4FQY+oopR8o=
> > =TgzR
> > -----END PGP SIGNATURE-----

suggest you mount the board on cardboard out of the case to confirm no
shorting is taking place, then slowly start adding components.

In article <DnzJd.336$(E-Mail Removed)>, "MC"
<(E-Mail Removed)> wrote:

> Yup! Connected CPU, RAM and video card. And of course both the ATX and
> ATX12V. The damn thing will not fire up but if I remove the ATX12V, the PSU
> and CPU fans would work!!! But there no beep codes. This is a very first and
> maybe the last experience I may have with Asus 'cos I have requested for
> another RMA and will be swapping for a Gigabyte instead which all my
> previous system have been in the past without any problems.
>
> Thanks again.

Based on power supply specifications, there should be enough amps
for that combination to work.

But your symptoms and the fact that you've swapped motherboards,
should be telling you that the PSU is at fault. If you purchased
the PSU locally, take it back to the shop and swap it. Even
borrow a supply from someone, test with that, and I bet the
motherboard will start (if the Truepower hasn't damaged it,
that is).

It is always a good idea to keep a quality spare power supply
around, because sooner or later, you'll need it. It also
helps if the supply is a different brand, than the one
currently in your computer case.

There was one Asus P4 based board, that would not start up with
_any_ Antec Truepower ATX supply. Other brands of power supplies
would work. Asus fixed the problem with a component change on
the motherboard, and repaired under RMA, the initial batch of
production boards that were affected. I doubt this scenario is
being replayed on the K8V, because otherwise this group would be
full of stories about that combination of components. (Also,
your symptoms are consistent with an overload of +12V, and not
a latchoff of the Vcore circuit, that seemed to be at the root
of this Abxzone scenario.)

http://abxzone.com/forums/showthread...uepower+p4p800

Paul

The PSU has been used before this new build- again nothing wrong with it.

Thanks


"Paul" <(E-Mail Removed)> wrote in message
news:nospam-2501051935320001@192.168.1.177...
> In article <DnzJd.336$(E-Mail Removed)>, "MC"
> <(E-Mail Removed)> wrote:
>
> > Yup! Connected CPU, RAM and video card. And of course both the ATX and
> > ATX12V. The damn thing will not fire up but if I remove the ATX12V, the
PSU
> > and CPU fans would work!!! But there no beep codes. This is a very first
and
> > maybe the last experience I may have with Asus 'cos I have requested for
> > another RMA and will be swapping for a Gigabyte instead which all my
> > previous system have been in the past without any problems.
> >
> > Thanks again.
>
> Based on power supply specifications, there should be enough amps
> for that combination to work.
>
> But your symptoms and the fact that you've swapped motherboards,
> should be telling you that the PSU is at fault. If you purchased
> the PSU locally, take it back to the shop and swap it. Even
> borrow a supply from someone, test with that, and I bet the
> motherboard will start (if the Truepower hasn't damaged it,
> that is).
>
> It is always a good idea to keep a quality spare power supply
> around, because sooner or later, you'll need it. It also
> helps if the supply is a different brand, than the one
> currently in your computer case.
>
> There was one Asus P4 based board, that would not start up with
> _any_ Antec Truepower ATX supply. Other brands of power supplies
> would work. Asus fixed the problem with a component change on
> the motherboard, and repaired under RMA, the initial batch of
> production boards that were affected. I doubt this scenario is
> being replayed on the K8V, because otherwise this group would be
> full of stories about that combination of components. (Also,
> your symptoms are consistent with an overload of +12V, and not
> a latchoff of the Vcore circuit, that seemed to be at the root
> of this Abxzone scenario.)
>
>
http://abxzone.com/forums/showthread...uepower+p4p800
>
> Paul