PC Review


Reply
Thread Tools Rate Thread

Asus A8N-E Hangs At Entering Setup...

 
 
Peter van der Goes
Guest
Posts: n/a
 
      1st Jan 2006
New build.
Asus A8N-E w Athlon 64 X2 3800+, 2 Gig PC 4000, 1 SATA 250 Gig, EVGA 6600
video, DVD+-R, DVD.

On power up the video BIOS info appears, followed by the Asus Logo screen
with message at bottom right:

Hit Del to enter setup.
If I hit Del *quickly*, the message changes to "Entering setup...", then the
system hangs at that point.

I get the same results if I load a boot floppy and wait. The floppy drive
and optical drives are never accessed

I have powered speakers hooked up to line out, but no audio messages are
provided.

I've tried (so far) removing one of the RAM modules. No effect.

I'm reusing a case w/400 Watt PSU, rated at only 15A on the 12V rail.
Any chance this is a power issue?
FWIW, I *do* have the extra 4 connector power cable hooked up to the
motherboard.

Any suggestions?


 
Reply With Quote
 
 
 
 
Malcolm
Guest
Posts: n/a
 
      1st Jan 2006
Peter van der Goes wrote:

> New build.
> Asus A8N-E w Athlon 64 X2 3800+, 2 Gig PC 4000, 1 SATA 250 Gig, EVGA 6600
> video, DVD+-R, DVD.
>
> On power up the video BIOS info appears, followed by the Asus Logo screen
> with message at bottom right:
>
> Hit Del to enter setup.
> If I hit Del *quickly*, the message changes to "Entering setup...", then
> the system hangs at that point.
>
> I get the same results if I load a boot floppy and wait. The floppy drive
> and optical drives are never accessed
>
> I have powered speakers hooked up to line out, but no audio messages are
> provided.
>
> I've tried (so far) removing one of the RAM modules. No effect.
>
> I'm reusing a case w/400 Watt PSU, rated at only 15A on the 12V rail.
> Any chance this is a power issue?
> FWIW, I *do* have the extra 4 connector power cable hooked up to the
> motherboard.
>
> Any suggestions?

Hi
You need BIOS rev =>1007 for the X2 3800+ if it's not, then use the ASUS EZ
BIOS routine detailed in section 2.1.5 of the manual.

--
Cheers
Malcolm °¿°
 
Reply With Quote
 
Wes Newell
Guest
Posts: n/a
 
      2nd Jan 2006
On Sun, 01 Jan 2006 17:16:34 -0600, Peter van der Goes wrote:

> New build.
> Asus A8N-E w Athlon 64 X2 3800+, 2 Gig PC 4000, 1 SATA 250 Gig, EVGA 6600
> video, DVD+-R, DVD.
>
> On power up the video BIOS info appears, followed by the Asus Logo screen
> with message at bottom right:
>
> Hit Del to enter setup.
> If I hit Del *quickly*, the message changes to "Entering setup...", then the
> system hangs at that point.
>
> I'm reusing a case w/400 Watt PSU, rated at only 15A on the 12V rail.
> Any chance this is a power issue?


Yes. I had the same problem trying to use a 400W PSU like that that's
still running a K7 system today. Exactly the same, except sometimes I
could get to bios, but it locked up then. Bought a cheap 600W with 26A on
+12v and it's been running good 24/7 for almost 2 years now.

> FWIW, I *do* have the extra 4 connector power cable hooked up to the
> motherboard.
>
> Any suggestions?


Well, I pretty much verified mine was a power problem by tying an old AT
PSU 12v in with the ATX. I could get a little farther along then, but not
much. Pulled the old PSU off and it went back to shuting down ealier.

--
Want to control your HTPC. Tired of paying for guide data?
Want the ultimate in free OTA HDTV Recorder. mythtv.org
alt.video.ptv.mythtv is now available request it from your server.


 
Reply With Quote
 
Peter van der Goes
Guest
Posts: n/a
 
      3rd Jan 2006

"Wes Newell" <(E-Mail Removed)> wrote in message
newsx_tf.7366$7x.5954@trnddc03...
> On Sun, 01 Jan 2006 17:16:34 -0600, Peter van der Goes wrote:
>
>> New build.
>> Asus A8N-E w Athlon 64 X2 3800+, 2 Gig PC 4000, 1 SATA 250 Gig, EVGA 6600
>> video, DVD+-R, DVD.
>>
>> On power up the video BIOS info appears, followed by the Asus Logo screen
>> with message at bottom right:
>>
>> Hit Del to enter setup.
>> If I hit Del *quickly*, the message changes to "Entering setup...", then
>> the
>> system hangs at that point.
>>
>> I'm reusing a case w/400 Watt PSU, rated at only 15A on the 12V rail.
>> Any chance this is a power issue?

>
> Yes. I had the same problem trying to use a 400W PSU like that that's
> still running a K7 system today. Exactly the same, except sometimes I
> could get to bios, but it locked up then. Bought a cheap 600W with 26A on
> +12v and it's been running good 24/7 for almost 2 years now.
>

Dead on, Wes. Thank you very much!
Got a 650W cheapie (ChiefMax brand), and the new PC is running great.


 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setup hangs up after Entering oroduct key =?Utf-8?B?dm9sdm9zaw==?= Windows Vista Installation 2 1st Jul 2006 04:15 AM
Asus A8N-E Hangs At Entering Setup... Peter van der Goes AMD 64 Bit 3 3rd Jan 2006 01:35 PM
XP Setup hangs with dual PIII-550 on Asus P2B-DS v1.04 Nir Gilboa Asus Motherboards 25 19th Oct 2005 05:19 AM
hangs entering stad-by SkiMan Windows XP Performance 1 22nd Dec 2003 10:29 PM
IE Hangs when entering a URL Jeffrey D. Poling Windows XP Internet Explorer 0 16th Jul 2003 03:46 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 08:51 PM.