How do you do
i have acquirements the A7N266-VM and i want precisely to know of how one
active
the 6 channels
after have thrown NV AUDIO
i have as specified in
output analogical Dolby Surround
output S/P-DIF unable (i dont know precisely to what this would corresponds)
in High-[parleurs]
4 High-[parleurs]
and in configuration some issues the high-talker rear is logged to
[line]-in
and well [évidement] i have wire one second pair of high talker to
[line]-in
(the first one being on-line to [line]-[out]).
i throw then one would games exploiting Direct Sound 3D and step an only
sound upon
the HP rear
but on the other hand of his upon the HP previously (i have will then to
rise the volume some
HP rear and
no sound not left).
same thing some choosing 5. 1 and in configuration some issues the
Speaker rear is
on-line to [line]-in
the high-talker central is logged to MIC.
i have fact many of test run along with several games along with EAX and no
[restituait]
of sound.
I have to purchase those motherboard in a configuration UNIKA.
I want to know if my motherboard manages well the wave 5. 1 and if yes of
how
is necessary it if
to take.
i have [télechargé] on your site win2[kxp]107c. zip
in the rubric regarding ASUS A7N266-VM
if someone not much to help
i have successful some activating output analogical Stéreo to the place of
output
analogical Dolby Surround
but alone the HP previously and [arriere] step (upon the exit [line] in)
On the other hand the exit MIC it not well stocked no sound
Salvation, it i seem than that [line]-in is an input, in the same way than
that MIC.
Your card sound integrate is well 5. 1? are three issues (orange black and
green, (on my HAVE7N266-C the map sound 5. 1 must be to add upon one would
[slot]
special)) and two entered ([line]-in and [mic]).
PHS
the map sound is well one 5. 1 i have looked upon the site of ASUS
3 issues:
green [line] [out]
blue [line] in
red MIC
upon textbook than that i have [telechargé] upon the site of the Asus it's
to indicate than that the
entered can itself to convert some issues when the one active the wave upon
4 or
6 channels
of the elsewhere this would step along with 4 channels ([line] [out], [line]
in).
my [probleme] is than that this would not step step along with 6 channels,
some connecting some high
[parleurs] normal ([chaine] HIFI).
this is to to tell than that the high talker central and the crate of low
not
[fonctionneront] step.
is this one would [proble] software program?
i want to know if there exists a software free of charge and downloadable,
permitting of to test the channels one would have one would.
|
Similar Threads
