I'm VERY new at this. Please bear with me. My server is
configured for DHCP. However, when configuring it we left
out the gateway ID (which points to the firewall and would
allow internet access for everyone. The plan was to
manually enter the firewall's gateway ID onto each machine
that was allowed to access the Internet.)
This has proven to be a bothersome plan. The worst part
is I can't remember where to find the screen that we put
the DNS addressess and Gateway ID in.

Please help.

Matt

go to my network places, right-click on LAN connection, double-click on
tcp/ip.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

"Powlaz" <(E-Mail Removed)> wrote in message
news:1845f01c41b10$af287f30$(E-Mail Removed)...
> I'm VERY new at this. Please bear with me. My server is
> configured for DHCP. However, when configuring it we left
> out the gateway ID (which points to the firewall and would
> allow internet access for everyone. The plan was to
> manually enter the firewall's gateway ID onto each machine
> that was allowed to access the Internet.)
> This has proven to be a bothersome plan. The worst part
> is I can't remember where to find the screen that we put
> the DNS addressess and Gateway ID in.
>
> Please help.
>
> Matt

>-----Original Message-----
>go to my network places, right-click on LAN connection,
double-click on
>tcp/ip.
>
>--
>For more and other information, go to
http://www.ChicagoTech.net
>
>Don't send e-mail or reply to me except you need
consulting services.
>Posting on MS newsgroup will benefit all readers and you
may get more help.
>
Thank you anyway. The answer I was looking for was:

(On the Server)
Administrative Services
DHCP
Server Options
Check the Router Box
Add the Gateway ID (Firewall address)

Matt
>Robert Lin, MS-MVP, MCSE & CNE
>Networking, Internet, Routing, VPN, Anti-Virus, Tips &
Troubleshooting on
>http://www.ChicagoTech.net
>This posting is provided "AS IS" with no warranties.
>
>"Powlaz" <(E-Mail Removed)> wrote in
message
>news:1845f01c41b10$af287f30$(E-Mail Removed)...
>> I'm VERY new at this. Please bear with me. My server
is
>> configured for DHCP. However, when configuring it we
left
>> out the gateway ID (which points to the firewall and
would
>> allow internet access for everyone. The plan was to
>> manually enter the firewall's gateway ID onto each
machine
>> that was allowed to access the Internet.)
>> This has proven to be a bothersome plan. The worst part
>> is I can't remember where to find the screen that we put
>> the DNS addressess and Gateway ID in.
>>
>> Please help.
>>
>> Matt
>
>
>.
>