Hi all,

I have a server with 3 Arrays (array's A,B & C ) i need to match the drive
letters in windows 2000 to the array they are setup on. Does anyone know how
to do this?

You cannot use drive letters "A" and "B" for harddrives.

Paul wrote:

> Hi all,
>
> I have a server with 3 Arrays (array's A,B & C ) i need to match the drive
> letters in windows 2000 to the array they are setup on. Does anyone know how
> to do this?

Thanks for the reply but actually what i meant was that i have Drive letter
F: which is 3 hardrives that are setup in an array. In Windows it shows
drive F: as one hard disk, what i need to know is, is drive letter F: using
the Array of disks A,B or C?

For your information i have 3 arrays all with 3 harddrives connected to
each. Each harddrive is the same size and each array is the same size.

"Paul" <(E-Mail Removed)> wrote in message
news:FCAFF0D1-F453-49F9-A545-(E-Mail Removed)...
> Hi all,
>
> I have a server with 3 Arrays (array's A,B & C ) i need to match the drive
> letters in windows 2000 to the array they are setup on. Does anyone know
> how
> to do this?

You can use Disk Management to match up the logical drives to drive letters.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"Paul Nightingale" wrote:
| Thanks for the reply but actually what i meant was that i have Drive
letter
| F: which is 3 hardrives that are setup in an array. In Windows it shows
| drive F: as one hard disk, what i need to know is, is drive letter F:
using
| the Array of disks A,B or C?
|
| For your information i have 3 arrays all with 3 harddrives connected to
| each. Each harddrive is the same size and each array is the same size.
|
| "Paul" <(E-Mail Removed)> wrote in message
| news:FCAFF0D1-F453-49F9-A545-(E-Mail Removed)...
| > Hi all,
| >
| > I have a server with 3 Arrays (array's A,B & C ) i need to match the
drive
| > letters in windows 2000 to the array they are setup on. Does anyone
know
| > how
| > to do this?
|
|

A single hardware RAID array is seen by the operating system as a single
physical drive and may be managed/partitioned in the manner you wish. 3
arrays will be 3 devices in Disk Management. Configure them as you wish.

Paul Nightingale wrote:
> Thanks for the reply but actually what i meant was that i have Drive letter
> F: which is 3 hardrives that are setup in an array. In Windows it shows
> drive F: as one hard disk, what i need to know is, is drive letter F: using
> the Array of disks A,B or C?
>
> For your information i have 3 arrays all with 3 harddrives connected to
> each. Each harddrive is the same size and each array is the same size.
>
> "Paul" <(E-Mail Removed)> wrote in message
> news:FCAFF0D1-F453-49F9-A545-(E-Mail Removed)...
>
>>Hi all,
>>
>>I have a server with 3 Arrays (array's A,B & C ) i need to match the drive
>>letters in windows 2000 to the array they are setup on. Does anyone know
>>how
>>to do this?
>
>
>