[psd99]

Saturday night decided to spend it in

I've put in my new motherboard JUST THE BOARD and A PSU

that is just TWO THINGS okay Asus P5E3 and this Tagan 500W PSU that def works....

I've put in the power pins I am sure they are right...
also put the bit ATX power into the board and the additional 12v connector

then run a power lead into the wall and NOTHING

don't even give me no lights

have boards changed or something since socket A?

or am I missing something? Please help

(thought I would try power up board and check the internal speaker/ light of board without gfx/mem or cpu, I know strange)

[psd99]

okay a little bit of good news

I got a green light on the asus board....

but it still dont power on!!! trouble shooting begins (very cautious)

[Me__2001]

does the board have an LED that indicates there is power?

Edit: well thats good news

if there is no CPU then nothing is going to happen

[psd99]

Okay still getting green light but when I push the power button I get a blue light near the power button but then after 2 seconds that light turns off.

I don't think the PSU has even spun yet
okay I hope that these socket 775 boards dont power on properly until you got certain parts installed....
anyone can you confirm my theory?

[psd99]

WOO HOO

with the graphics card installed I got the PSU spinning up BUT SADLY NO BEEP

okay no beep without a CPU and MEMORY
I'm sure I should hear something!?

*(at this point I feel scared to try that on a working machine)

[psd99]

Originally Posted by Me__2001

does the board have an LED that indicates there is power?

Edit: well thats good news

if there is no CPU then nothing is going to happen

Me should I hear a beep without cpu and memory?

[psd99]

omg omg I put on all 4 case fans

HOW SILENT IS THAT?!!!

I got to take some pictures now just to show someone who actually likes this stuff!

[psd99]

okay to confirm again i've done no further trouble shooting but without the GFX it wouldn't power on nor beep
and with the gfx it turned on but still no beeps!

[Waynos_Face]

Pretty sure it won't beep if you don't have a cpu in as the BIOS can't even start, so with no BIOS no POST.

[psd99]

what about the troublesome beeps?

one beep means POST is succesful

one beep followed by two short = mem

two short beeps = CPU

(the last two are just examples)

But I can't remember if you would get a beep without CPU and MEM.
errrr i'll have to wait until I get the memory now at the v least