I have worked with ICS for years on several setups. But
this one I can't fix - anyone out there that can?

- Have created a dialup connection that uses ISDN
- In the properties of the TCP/IP on the advanced tab, I
enable ICS and press apply. After a few seconds I receive
(something like) this message: "Cannot enable shared
access. Error 2: The system cannot find the file
specified."
- There is no entry in the Event log
- It used to work in this setup - but now I get this error

Any ideas?

/LPJ

We don't know exactly what causes this error. The only advice I have is to
make sure the private side adapter is enabled and has an IP address before
enabling ICS.

--

Ken Wickes [MSFT] -- This posting is provided "AS IS" with no warranties,
and confers no rights.


"LPJ" <(E-Mail Removed)> wrote in message
news:296501c33f55$f45d4870$(E-Mail Removed)...
> I have worked with ICS for years on several setups. But
> this one I can't fix - anyone out there that can?
>
> - Have created a dialup connection that uses ISDN
> - In the properties of the TCP/IP on the advanced tab, I
> enable ICS and press apply. After a few seconds I receive
> (something like) this message: "Cannot enable shared
> access. Error 2: The system cannot find the file
> specified."
> - There is no entry in the Event log
> - It used to work in this setup - but now I get this error
>
> Any ideas?
>
> /LPJ

Thanks Ken.

But I am afrait, that I already did that - and it still
doesn't work.

/LPJ

>-----Original Message-----
>We don't know exactly what causes this error. The only
advice I have is to
>make sure the private side adapter is enabled and has an
IP address before
>enabling ICS.
>
>--
>
>Ken Wickes [MSFT] -- This posting is provided "AS IS"
with no warranties,
>and confers no rights.
>
>
>"LPJ" <(E-Mail Removed)> wrote in message
>news:296501c33f55$f45d4870$(E-Mail Removed)...
>> I have worked with ICS for years on several setups. But
>> this one I can't fix - anyone out there that can?
>>
>> - Have created a dialup connection that uses ISDN
>> - In the properties of the TCP/IP on the advanced tab,
I
>> enable ICS and press apply. After a few seconds I
receive
>> (something like) this message: "Cannot enable shared
>> access. Error 2: The system cannot find the file
>> specified."
>> - There is no entry in the Event log
>> - It used to work in this setup - but now I get this
error
>>
>> Any ideas?
>>
>> /LPJ
>
>
>.
>

An idea:

The user told me, that about the same time ICS stopped
working the user installed ad-aware 6.0. Could it be,
that it quarantined the file that is missing?

If the error message is correct; Does anyone know witch
files are needed for ICS?

/LPJ

>-----Original Message-----
>Thanks Ken.
>
>But I am afrait, that I already did that - and it still
>doesn't work.
>
>/LPJ
>
>>-----Original Message-----
>>We don't know exactly what causes this error. The only
>advice I have is to
>>make sure the private side adapter is enabled and has
an
>IP address before
>>enabling ICS.
>>
>>--
>>
>>Ken Wickes [MSFT] -- This posting is provided "AS IS"
>with no warranties,
>>and confers no rights.
>>
>>
>>"LPJ" <(E-Mail Removed)> wrote in message
>>news:296501c33f55$f45d4870$(E-Mail Removed)...
>>> I have worked with ICS for years on several setups.
But
>>> this one I can't fix - anyone out there that can?
>>>
>>> - Have created a dialup connection that uses ISDN
>>> - In the properties of the TCP/IP on the advanced
tab,
>I
>>> enable ICS and press apply. After a few seconds I
>receive
>>> (something like) this message: "Cannot enable shared
>>> access. Error 2: The system cannot find the file
>>> specified."
>>> - There is no entry in the Event log
>>> - It used to work in this setup - but now I get this
>error
>>>
>>> Any ideas?
>>>
>>> /LPJ
>>
>>
>>.
>>
>.
>

Well I wouldn't put anything past adaware. I doubt the error message really
applies to a physical file, error 2 often means "something" not found.

Does "ipconfig /renew" work correctly?

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


"LPJ" <(E-Mail Removed)> wrote in message
news:02d001c33fb5$0ed61f10$(E-Mail Removed)...
> An idea:
>
> The user told me, that about the same time ICS stopped
> working the user installed ad-aware 6.0. Could it be,
> that it quarantined the file that is missing?
>
> If the error message is correct; Does anyone know witch
> files are needed for ICS?
>
> /LPJ
>
> >-----Original Message-----
> >Thanks Ken.
> >
> >But I am afrait, that I already did that - and it still
> >doesn't work.
> >
> >/LPJ
> >
> >>-----Original Message-----
> >>We don't know exactly what causes this error. The only
> >advice I have is to
> >>make sure the private side adapter is enabled and has
> an
> >IP address before
> >>enabling ICS.
> >>
> >>--
> >>
> >>Ken Wickes [MSFT] -- This posting is provided "AS IS"
> >with no warranties,
> >>and confers no rights.
> >>
> >>
> >>"LPJ" <(E-Mail Removed)> wrote in message
> >>news:296501c33f55$f45d4870$(E-Mail Removed)...
> >>> I have worked with ICS for years on several setups.
> But
> >>> this one I can't fix - anyone out there that can?
> >>>
> >>> - Have created a dialup connection that uses ISDN
> >>> - In the properties of the TCP/IP on the advanced
> tab,
> >I
> >>> enable ICS and press apply. After a few seconds I
> >receive
> >>> (something like) this message: "Cannot enable shared
> >>> access. Error 2: The system cannot find the file
> >>> specified."
> >>> - There is no entry in the Event log
> >>> - It used to work in this setup - but now I get this
> >error
> >>>
> >>> Any ideas?
> >>>
> >>> /LPJ
> >>
> >>
> >>.
> >>
> >.
> >

No, "ipconfig /renew" does not work. Does this help?

Another possible reason is, that the user also used the
Microsoft program Bootvis v1.0.0.1 about the same...

/LPJ

>-----Original Message-----
>Well I wouldn't put anything past adaware. I doubt the
error message really
>applies to a physical file, error 2 often
means "something" not found.
>
>Does "ipconfig /renew" work correctly?
>
>--
>
>Ken Wickes [MSFT]
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>
>
>"LPJ" <(E-Mail Removed)> wrote in message
>news:02d001c33fb5$0ed61f10$(E-Mail Removed)...
>> An idea:
>>
>> The user told me, that about the same time ICS stopped
>> working the user installed ad-aware 6.0. Could it be,
>> that it quarantined the file that is missing?
>>
>> If the error message is correct; Does anyone know witch
>> files are needed for ICS?
>>
>> /LPJ
>>
>> >-----Original Message-----
>> >Thanks Ken.
>> >
>> >But I am afrait, that I already did that - and it
still
>> >doesn't work.
>> >
>> >/LPJ
>> >
>> >>-----Original Message-----
>> >>We don't know exactly what causes this error. The
only
>> >advice I have is to
>> >>make sure the private side adapter is enabled and has
>> an
>> >IP address before
>> >>enabling ICS.
>> >>
>> >>--
>> >>
>> >>Ken Wickes [MSFT] -- This posting is provided "AS IS"
>> >with no warranties,
>> >>and confers no rights.
>> >>
>> >>
>> >>"LPJ" <(E-Mail Removed)> wrote in message
>> >>news:296501c33f55$f45d4870$(E-Mail Removed)...
>> >>> I have worked with ICS for years on several setups.
>> But
>> >>> this one I can't fix - anyone out there that can?
>> >>>
>> >>> - Have created a dialup connection that uses ISDN
>> >>> - In the properties of the TCP/IP on the advanced
>> tab,
>> >I
>> >>> enable ICS and press apply. After a few seconds I
>> >receive
>> >>> (something like) this message: "Cannot enable
shared
>> >>> access. Error 2: The system cannot find the file
>> >>> specified."
>> >>> - There is no entry in the Event log
>> >>> - It used to work in this setup - but now I get
this
>> >error
>> >>>
>> >>> Any ideas?
>> >>>
>> >>> /LPJ
>> >>
>> >>
>> >>.
>> >>
>> >.
>> >
>
>
>.
>

Does ipconfig /renew also give error 2?

Run "winmsd" and go to Components/Network/Protocol. Do you see entries for
the following:

MSAFD Tcpip [TCP/IP]
MSAFD Tcpip [UDP/IP]
MSAFD Tcpip [RAW/IP]



--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


"LPJ" <(E-Mail Removed)> wrote in message
news:059901c342ea$5b972b40$(E-Mail Removed)...
> No, "ipconfig /renew" does not work. Does this help?
>
> Another possible reason is, that the user also used the
> Microsoft program Bootvis v1.0.0.1 about the same...
>
> /LPJ
>
> >-----Original Message-----
> >Well I wouldn't put anything past adaware. I doubt the
> error message really
> >applies to a physical file, error 2 often
> means "something" not found.
> >
> >Does "ipconfig /renew" work correctly?
> >
> >--
> >
> >Ken Wickes [MSFT]
> >This posting is provided "AS IS" with no warranties, and
> confers no rights.
> >
> >
> >"LPJ" <(E-Mail Removed)> wrote in message
> >news:02d001c33fb5$0ed61f10$(E-Mail Removed)...
> >> An idea:
> >>
> >> The user told me, that about the same time ICS stopped
> >> working the user installed ad-aware 6.0. Could it be,
> >> that it quarantined the file that is missing?
> >>
> >> If the error message is correct; Does anyone know witch
> >> files are needed for ICS?
> >>
> >> /LPJ
> >>
> >> >-----Original Message-----
> >> >Thanks Ken.
> >> >
> >> >But I am afrait, that I already did that - and it
> still
> >> >doesn't work.
> >> >
> >> >/LPJ
> >> >
> >> >>-----Original Message-----
> >> >>We don't know exactly what causes this error. The
> only
> >> >advice I have is to
> >> >>make sure the private side adapter is enabled and has
> >> an
> >> >IP address before
> >> >>enabling ICS.
> >> >>
> >> >>--
> >> >>
> >> >>Ken Wickes [MSFT] -- This posting is provided "AS IS"
> >> >with no warranties,
> >> >>and confers no rights.
> >> >>
> >> >>
> >> >>"LPJ" <(E-Mail Removed)> wrote in message
> >> >>news:296501c33f55$f45d4870$(E-Mail Removed)...
> >> >>> I have worked with ICS for years on several setups.
> >> But
> >> >>> this one I can't fix - anyone out there that can?
> >> >>>
> >> >>> - Have created a dialup connection that uses ISDN
> >> >>> - In the properties of the TCP/IP on the advanced
> >> tab,
> >> >I
> >> >>> enable ICS and press apply. After a few seconds I
> >> >receive
> >> >>> (something like) this message: "Cannot enable
> shared
> >> >>> access. Error 2: The system cannot find the file
> >> >>> specified."
> >> >>> - There is no entry in the Event log
> >> >>> - It used to work in this setup - but now I get
> this
> >> >error
> >> >>>
> >> >>> Any ideas?
> >> >>>
> >> >>> /LPJ
> >> >>
> >> >>
> >> >>.
> >> >>
> >> >.
> >> >
> >
> >
> >.
> >

I am having a similar problem - except I can't seem to add
protocols/services/clients without getting that error. When running winmsd,
I show NOTHING under Protocol, Adapter or WinSock, even though the entire
networking subsystem was running just fine two days ago. I've searched the
web and tried all the tricks and tips I could find and I'm still right at
the same place. Very frustrating.

"Ken Wickes [MSFT]" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Does ipconfig /renew also give error 2?
>
> Run "winmsd" and go to Components/Network/Protocol. Do you see entries
for
> the following:
>
> MSAFD Tcpip [TCP/IP]
> MSAFD Tcpip [UDP/IP]
> MSAFD Tcpip [RAW/IP]
>
>
>
> --
>
> Ken Wickes [MSFT]
> This posting is provided "AS IS" with no warranties, and confers no
rights.
>
>
> "LPJ" <(E-Mail Removed)> wrote in message
> news:059901c342ea$5b972b40$(E-Mail Removed)...
> > No, "ipconfig /renew" does not work. Does this help?
> >
> > Another possible reason is, that the user also used the
> > Microsoft program Bootvis v1.0.0.1 about the same...
> >
> > /LPJ
> >
> > >-----Original Message-----
> > >Well I wouldn't put anything past adaware. I doubt the
> > error message really
> > >applies to a physical file, error 2 often
> > means "something" not found.
> > >
> > >Does "ipconfig /renew" work correctly?
> > >
> > >--
> > >
> > >Ken Wickes [MSFT]
> > >This posting is provided "AS IS" with no warranties, and
> > confers no rights.
> > >
> > >
> > >"LPJ" <(E-Mail Removed)> wrote in message
> > >news:02d001c33fb5$0ed61f10$(E-Mail Removed)...
> > >> An idea:
> > >>
> > >> The user told me, that about the same time ICS stopped
> > >> working the user installed ad-aware 6.0. Could it be,
> > >> that it quarantined the file that is missing?
> > >>
> > >> If the error message is correct; Does anyone know witch
> > >> files are needed for ICS?
> > >>
> > >> /LPJ
> > >>
> > >> >-----Original Message-----
> > >> >Thanks Ken.
> > >> >
> > >> >But I am afrait, that I already did that - and it
> > still
> > >> >doesn't work.
> > >> >
> > >> >/LPJ
> > >> >
> > >> >>-----Original Message-----
> > >> >>We don't know exactly what causes this error. The
> > only
> > >> >advice I have is to
> > >> >>make sure the private side adapter is enabled and has
> > >> an
> > >> >IP address before
> > >> >>enabling ICS.
> > >> >>
> > >> >>--
> > >> >>
> > >> >>Ken Wickes [MSFT] -- This posting is provided "AS IS"
> > >> >with no warranties,
> > >> >>and confers no rights.
> > >> >>
> > >> >>
> > >> >>"LPJ" <(E-Mail Removed)> wrote in message
> > >> >>news:296501c33f55$f45d4870$(E-Mail Removed)...
> > >> >>> I have worked with ICS for years on several setups.
> > >> But
> > >> >>> this one I can't fix - anyone out there that can?
> > >> >>>
> > >> >>> - Have created a dialup connection that uses ISDN
> > >> >>> - In the properties of the TCP/IP on the advanced
> > >> tab,
> > >> >I
> > >> >>> enable ICS and press apply. After a few seconds I
> > >> >receive
> > >> >>> (something like) this message: "Cannot enable
> > shared
> > >> >>> access. Error 2: The system cannot find the file
> > >> >>> specified."
> > >> >>> - There is no entry in the Event log
> > >> >>> - It used to work in this setup - but now I get
> > this
> > >> >error
> > >> >>>
> > >> >>> Any ideas?
> > >> >>>
> > >> >>> /LPJ
> > >> >>
> > >> >>
> > >> >>.
> > >> >>
> > >> >.
> > >> >
> > >
> > >
> > >.
> > >
>
>

1) ipconfig /renew gives a reply like this: "Did not
succede since not networkcard is in a valid mode for the
selected action" (translated for Danish, might be
different in English)

2) Not quite, I got these:
MSAFD Irda [IrDA]
MSAFD Tcpip [TCP/IP]
MSAFD Tcpip [UDP/IP]
RSVP UDP Service Provider
RSVP TCP Service Provider
MSAFD NetBIOS [\Device\NetBT_Tcpip_{BD076EC2-7A1E-4BC4-
95BF-1D8BD2EA1C72}] SEQPACKET 0
MSAFD NetBIOS [\Device\NetBT_Tcpip_{BD076EC2-7A1E-4BC4-
95BF-1D8BD2EA1C72}] DATAGRAM 0
MSAFD NetBIOS [\Device\NetBT_Tcpip_{ECA7BF95-18D4-470F-
A112-762DBDA177F2}] SEQPACKET 1
MSAFD NetBIOS [\Device\NetBT_Tcpip_{ECA7BF95-18D4-470F-
A112-762DBDA177F2}] DATAGRAM 1
MSAFD NetBIOS [\Device\NetBT_Tcpip_{897A58F1-468D-4904-
8D37-D40B7634752C}] SEQPACKET 2
MSAFD NetBIOS [\Device\NetBT_Tcpip_{897A58F1-468D-4904-
8D37-D40B7634752C}] DATAGRAM 2
MSAFD NetBIOS [\Device\NetBT_Tcpip_{1AAABE09-2E5C-49BF-
B29A-CC119EE0B231}] SEQPACKET 3
MSAFD NetBIOS [\Device\NetBT_Tcpip_{1AAABE09-2E5C-49BF-
B29A-CC119EE0B231}] DATAGRAM 3
MSAFD NetBIOS [\Device\NetBT_Tcpip_{B9C6229E-53F8-42BC-
9B97-C0103F8F5A71}] SEQPACKET 4
MSAFD NetBIOS [\Device\NetBT_Tcpip_{B9C6229E-53F8-42BC-
9B97-C0103F8F5A71}] DATAGRAM 4
MSAFD NetBIOS [\Device\NetBT_Tcpip_{8AFD1466-50BC-4DB0-
9E6C-553DD201F2D1}] SEQPACKET 5
MSAFD NetBIOS [\Device\NetBT_Tcpip_{8AFD1466-50BC-4DB0-
9E6C-553DD201F2D1}] DATAGRAM 5
MSAFD NetBIOS [\Device\NetBT_Tcpip_{DA7616C1-F52A-4380-
ADC2-674AD499E030}] SEQPACKET 6
MSAFD NetBIOS [\Device\NetBT_Tcpip_{DA7616C1-F52A-4380-
ADC2-674AD499E030}] DATAGRAM 6

As you can see, there is no RAW/IP.

/LPJ
>-----Original Message-----
>Does ipconfig /renew also give error 2?
>
>Run "winmsd" and go to Components/Network/Protocol. Do
you see entries for
>the following:
>
>MSAFD Tcpip [TCP/IP]
>MSAFD Tcpip [UDP/IP]
>MSAFD Tcpip [RAW/IP]
>
>
>
>--
>
>Ken Wickes [MSFT]
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>
>
>"LPJ" <(E-Mail Removed)> wrote in message
>news:059901c342ea$5b972b40$(E-Mail Removed)...
>> No, "ipconfig /renew" does not work. Does this help?
>>
>> Another possible reason is, that the user also used the
>> Microsoft program Bootvis v1.0.0.1 about the same...
>>
>> /LPJ
>>
>> >-----Original Message-----
>> >Well I wouldn't put anything past adaware. I doubt
the
>> error message really
>> >applies to a physical file, error 2 often
>> means "something" not found.
>> >
>> >Does "ipconfig /renew" work correctly?
>> >
>> >--
>> >
>> >Ken Wickes [MSFT]
>> >This posting is provided "AS IS" with no warranties,
and
>> confers no rights.
>> >
>> >
>> >"LPJ" <(E-Mail Removed)> wrote in message
>> >news:02d001c33fb5$0ed61f10$(E-Mail Removed)...
>> >> An idea:
>> >>
>> >> The user told me, that about the same time ICS
stopped
>> >> working the user installed ad-aware 6.0. Could it
be,
>> >> that it quarantined the file that is missing?
>> >>
>> >> If the error message is correct; Does anyone know
witch
>> >> files are needed for ICS?
>> >>
>> >> /LPJ
>> >>
>> >> >-----Original Message-----
>> >> >Thanks Ken.
>> >> >
>> >> >But I am afrait, that I already did that - and it
>> still
>> >> >doesn't work.
>> >> >
>> >> >/LPJ
>> >> >
>> >> >>-----Original Message-----
>> >> >>We don't know exactly what causes this error. The
>> only
>> >> >advice I have is to
>> >> >>make sure the private side adapter is enabled and
has
>> >> an
>> >> >IP address before
>> >> >>enabling ICS.
>> >> >>
>> >> >>--
>> >> >>
>> >> >>Ken Wickes [MSFT] -- This posting is provided "AS
IS"
>> >> >with no warranties,
>> >> >>and confers no rights.
>> >> >>
>> >> >>
>> >> >>"LPJ" <(E-Mail Removed)> wrote in message
>> >> >>news:296501c33f55$f45d4870$(E-Mail Removed)...
>> >> >>> I have worked with ICS for years on several
setups.
>> >> But
>> >> >>> this one I can't fix - anyone out there that
can?
>> >> >>>
>> >> >>> - Have created a dialup connection that uses
ISDN
>> >> >>> - In the properties of the TCP/IP on the
advanced
>> >> tab,
>> >> >I
>> >> >>> enable ICS and press apply. After a few seconds
I
>> >> >receive
>> >> >>> (something like) this message: "Cannot enable
>> shared
>> >> >>> access. Error 2: The system cannot find the file
>> >> >>> specified."
>> >> >>> - There is no entry in the Event log
>> >> >>> - It used to work in this setup - but now I get
>> this
>> >> >error
>> >> >>>
>> >> >>> Any ideas?
>> >> >>>
>> >> >>> /LPJ
>> >> >>
>> >> >>
>> >> >>.
>> >> >>
>> >> >.
>> >> >
>> >
>> >
>> >.
>> >
>
>
>.
>

Does the NIC work without ICS?

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.


"LPJ" <(E-Mail Removed)> wrote in message
news:03ae01c344b4$0bdd7250$(E-Mail Removed)...
> 1) ipconfig /renew gives a reply like this: "Did not
> succede since not networkcard is in a valid mode for the
> selected action" (translated for Danish, might be
> different in English)
>
> 2) Not quite, I got these:
> MSAFD Irda [IrDA]
> MSAFD Tcpip [TCP/IP]
> MSAFD Tcpip [UDP/IP]
> RSVP UDP Service Provider
> RSVP TCP Service Provider
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{BD076EC2-7A1E-4BC4-
> 95BF-1D8BD2EA1C72}] SEQPACKET 0
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{BD076EC2-7A1E-4BC4-
> 95BF-1D8BD2EA1C72}] DATAGRAM 0
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{ECA7BF95-18D4-470F-
> A112-762DBDA177F2}] SEQPACKET 1
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{ECA7BF95-18D4-470F-
> A112-762DBDA177F2}] DATAGRAM 1
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{897A58F1-468D-4904-
> 8D37-D40B7634752C}] SEQPACKET 2
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{897A58F1-468D-4904-
> 8D37-D40B7634752C}] DATAGRAM 2
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{1AAABE09-2E5C-49BF-
> B29A-CC119EE0B231}] SEQPACKET 3
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{1AAABE09-2E5C-49BF-
> B29A-CC119EE0B231}] DATAGRAM 3
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{B9C6229E-53F8-42BC-
> 9B97-C0103F8F5A71}] SEQPACKET 4
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{B9C6229E-53F8-42BC-
> 9B97-C0103F8F5A71}] DATAGRAM 4
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{8AFD1466-50BC-4DB0-
> 9E6C-553DD201F2D1}] SEQPACKET 5
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{8AFD1466-50BC-4DB0-
> 9E6C-553DD201F2D1}] DATAGRAM 5
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{DA7616C1-F52A-4380-
> ADC2-674AD499E030}] SEQPACKET 6
> MSAFD NetBIOS [\Device\NetBT_Tcpip_{DA7616C1-F52A-4380-
> ADC2-674AD499E030}] DATAGRAM 6
>
> As you can see, there is no RAW/IP.
>
> /LPJ
> >-----Original Message-----
> >Does ipconfig /renew also give error 2?
> >
> >Run "winmsd" and go to Components/Network/Protocol. Do
> you see entries for
> >the following:
> >
> >MSAFD Tcpip [TCP/IP]
> >MSAFD Tcpip [UDP/IP]
> >MSAFD Tcpip [RAW/IP]
> >
> >
> >
> >--
> >
> >Ken Wickes [MSFT]
> >This posting is provided "AS IS" with no warranties, and
> confers no rights.
> >
> >
> >"LPJ" <(E-Mail Removed)> wrote in message
> >news:059901c342ea$5b972b40$(E-Mail Removed)...
> >> No, "ipconfig /renew" does not work. Does this help?
> >>
> >> Another possible reason is, that the user also used the
> >> Microsoft program Bootvis v1.0.0.1 about the same...
> >>
> >> /LPJ
> >>
> >> >-----Original Message-----
> >> >Well I wouldn't put anything past adaware. I doubt
> the
> >> error message really
> >> >applies to a physical file, error 2 often
> >> means "something" not found.
> >> >
> >> >Does "ipconfig /renew" work correctly?
> >> >
> >> >--
> >> >
> >> >Ken Wickes [MSFT]
> >> >This posting is provided "AS IS" with no warranties,
> and
> >> confers no rights.
> >> >
> >> >
> >> >"LPJ" <(E-Mail Removed)> wrote in message
> >> >news:02d001c33fb5$0ed61f10$(E-Mail Removed)...
> >> >> An idea:
> >> >>
> >> >> The user told me, that about the same time ICS
> stopped
> >> >> working the user installed ad-aware 6.0. Could it
> be,
> >> >> that it quarantined the file that is missing?
> >> >>
> >> >> If the error message is correct; Does anyone know
> witch
> >> >> files are needed for ICS?
> >> >>
> >> >> /LPJ
> >> >>
> >> >> >-----Original Message-----
> >> >> >Thanks Ken.
> >> >> >
> >> >> >But I am afrait, that I already did that - and it
> >> still
> >> >> >doesn't work.
> >> >> >
> >> >> >/LPJ
> >> >> >
> >> >> >>-----Original Message-----
> >> >> >>We don't know exactly what causes this error. The
> >> only
> >> >> >advice I have is to
> >> >> >>make sure the private side adapter is enabled and
> has
> >> >> an
> >> >> >IP address before
> >> >> >>enabling ICS.
> >> >> >>
> >> >> >>--
> >> >> >>
> >> >> >>Ken Wickes [MSFT] -- This posting is provided "AS
> IS"
> >> >> >with no warranties,
> >> >> >>and confers no rights.
> >> >> >>
> >> >> >>
> >> >> >>"LPJ" <(E-Mail Removed)> wrote in message
> >> >> >>news:296501c33f55$f45d4870$(E-Mail Removed)...
> >> >> >>> I have worked with ICS for years on several
> setups.
> >> >> But
> >> >> >>> this one I can't fix - anyone out there that
> can?
> >> >> >>>
> >> >> >>> - Have created a dialup connection that uses
> ISDN
> >> >> >>> - In the properties of the TCP/IP on the
> advanced
> >> >> tab,
> >> >> >I
> >> >> >>> enable ICS and press apply. After a few seconds
> I
> >> >> >receive
> >> >> >>> (something like) this message: "Cannot enable
> >> shared
> >> >> >>> access. Error 2: The system cannot find the file
> >> >> >>> specified."
> >> >> >>> - There is no entry in the Event log
> >> >> >>> - It used to work in this setup - but now I get
> >> this
> >> >> >error
> >> >> >>>
> >> >> >>> Any ideas?
> >> >> >>>
> >> >> >>> /LPJ
> >> >> >>
> >> >> >>
> >> >> >>.
> >> >> >>
> >> >> >.
> >> >> >
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >