it has the photoconducter light on yellow toner light on flashing alternetly
paper jam paper out

photoconducter has been replaced with a new one it had this error on the
previous one

if anyone has any clue where to look or a fix let me know


jw

Happy Seeburg Olympian Owner <(E-Mail Removed)> wrote:
> it has the photoconducter light on yellow toner light on flashing alternetly
> paper jam paper out

> photoconducter has been replaced with a new one it had this error on the
> previous one

> if anyone has any clue where to look or a fix let me know

This code means a "fuser oil pump" error. The fuser unit has two
pumps, one to feed oil to the rollers and a second to return the
excess oil from the catch-tray back to the reservoir. If it fails an
oil overflow condition results. Moving the printer around without
extracting the oil first, usually causes oil spillage, and if any of
it gets on the oil overflow sensor PS10, located in the front of the
fuser unit, you get this error reported and the printer fails its
POST.

Tom.

--
Tom Crane, Dept. Physics, Royal Holloway, University of London, Egham Hill,
Egham, Surrey, TW20 0EX, England.
Email: (E-Mail Removed)
Fax: +44 (0) 1784 472794

i just want to thank you very much!!!

it is up and running like a champ again!!

Jim W
<(E-Mail Removed)> wrote in message
news:bplms3$1pr9dt$(E-Mail Removed)...
> Happy Seeburg Olympian Owner <(E-Mail Removed)> wrote:
> > it has the photoconducter light on yellow toner light on flashing
alternetly
> > paper jam paper out
>
> > photoconducter has been replaced with a new one it had this error on
the
> > previous one
>
> > if anyone has any clue where to look or a fix let me know
>
> This code means a "fuser oil pump" error. The fuser unit has two
> pumps, one to feed oil to the rollers and a second to return the
> excess oil from the catch-tray back to the reservoir. If it fails an
> oil overflow condition results. Moving the printer around without
> extracting the oil first, usually causes oil spillage, and if any of
> it gets on the oil overflow sensor PS10, located in the front of the
> fuser unit, you get this error reported and the printer fails its
> POST.
>
> Tom.
>
> --
> Tom Crane, Dept. Physics, Royal Holloway, University of London, Egham
Hill,
> Egham, Surrey, TW20 0EX, England.
> Email: (E-Mail Removed)
> Fax: +44 (0) 1784 472794