Anyone using PaltformBuilder to debug their image?

Hi

Back in June 2003 I had a problem with the amount of debug output I was
getting (over RS232) when running CF apps. This has come back to annoy me
again now that I need to use the debug over rs232 again so I thought I would
try this group instead of the platformbuilder one. The original message
follows (running SP2 now):

----------------------------------
Hi

While running a CF application on CE 4.1 or 4.2 xscale board (250 or 255)
there are many debug messages like the following:

Data Abort: Thread=83bad400 Proc=80d9eb7c 'gwes.exe'
AKY=00000089 PC=0003c720 RA=0003c718 BVA=0816cd50 FSR=00000007
TLSKERN_NOFAULT set... bypassing kernel debugger.

PC, RA, BVA have different values dependent on what causes the message.

As far as I can narrow it down, the messages are output when using the
toolbar. In particular, adding toolbar buttons to the toolbar, changing the
ImageIndex, Style, Enabled, DropDownMenu of ToolBarButton, touching the
MinimiseBox, MaximiseBox, WindowStyle of Form and other areas.

Any ideas please?

Cheers
Daniel
---------------------------------

Please can you at least confirm that you are seeing the same messages? It
would really help to know that this is not to do with our image but with the
CF itself...

Cheers
Daniel