On Mon, 27 Oct 2003 18:52:05 GMT,
(E-Mail Removed) (Lyn) wrote:
>Hi;
>I hope someone can help me with this.
>My CD-burner vanished.
>Does anyone know what type of conflict could have made the drive
>vanish?
>
>I have a LG CD-drive and a LG DVD-drive and I did have a CD burner
>drive...but..alas..no more. Although I do see it physically, so it
>must be there.. right!
>What happened to it?
>
>I am running Win98SE on Pent4.
>Question is..where do I get drivers for it? Does windows have the
>drivers? I think the drive may be generic, although it came with LG
>Adaptec recording software but I don't think drivers are on that CD.
>Should I- disconnect it - reboot - let windows find the drive -
>reinstall drivers.
>Thanks for any advice..
>Lyn
Hi again;
I have had this CD-burned on this comp. running fine for well over a
year, so I think jumpers are fine. Cables are ok. Bios does not detect
on boot-up.
I should also add that I haven't recently added new Software or
Hardware.
The CD & DVD drive are listed in Device manager.
The only splats (red circle with red line across it) I have are in on
the IRQ in the ECP resourses, and on the task bar over the 'Adaptec
Direct CD Wizard -No supported CD-R/CD-RW Drive' icon.
Hard Disk Controllers have no splat.
I thought I should also add that I 'just noticed' in Device Manager: a
yellow exclamation mark beside ECP Printer Port.
When I go to>properties>resourses:
there is a Interrupt Request 07 conflict>
IRQ 07 is used by the following:
ACPI IRQ Holder for PCI IRQ Steering
Standard Universal PCI to USB Host Controller
However when I go to manually reset, I only get a choice of 5 or 7.
Both of which have the same conflicts. All of my other IRQs are used,
so can I share with something else? Does this have to do with the
CD-Burner drive problem?
When the CD-Rom is uninstalled and comp. rebooted, it will only
install the CD-Rom drive. Still no CD-Burner.
Thnx........Lyn