On Fri, 09 Dec 2005 16:42:51 GMT, "KC Computers" <(E-Mail Removed)>
wrote:
>>> > A8N-VM CSM (using onboard video)
>>> > 1 GB (2x512) Patriot Signature PC3200
>>> > Antec NeoHE 430W PS
>>> > Hitachi T7K250 SATA II
>>> > floppy, CD-ROM, etc.
>>> > This system boots fine with a PATA drive, but when I connect the
>> Hitachi,>> > it>> > shuts down immediately after power up. Could this be a
>> PS problem? The
>>> > only>> > other one I have is a old 300W I'll swap in tomorrow. Til
>>> > then, has
>> anyone>> > else seen this symptom? TIA.
>>>>> We are a dealer and have had no problems using SATA drives
>>> on that motherboard. We have seen similiar problems with
>>> bad hard drives and cables. Have you tried swapping?
>>>
>> Am doing a PS swap today, and will also try the drive in another system to
>> see if is bad. Thanks.
>
>Also, try moving SATA cable to another connector and try a different cable
>as well.
And make sure that the boot order in the BIOS is correct. If it's
not, I'd expect that you'd at least get a "no system disk" error, but
it's worth looking at.
Antec is a very reliable manufacturer. I swear by them. I have Antec
cases AND PSUs for all my rigs, but they did produce some BAD LOTS of
Neo PSUs recently. You can get facts about that by Googling the
topic. Let us know if switching the PSU cures your problem.
Example:
http://tinyurl.com/dncp4
See here for a discussion of the issues when matching A8N motherboards
and the Antec Neo HE PSU
http://www.hardforum.com/showthread....t=Antec+Neo+HE
Ron