i have had windows vista for about a month , everything was working well
until my all in one printer hp 2610/3200 photosmart stops working. it worked
until 10:30 am. it seems that something is blocking it. and i need
according to them Base Smart Card Cryptographic Service Provider from
microsoft i get error messages when trying to print. it will print for me
scanning wise i don't know. but hp better get on the ball. does anyone have
any solutions that might help me?

Showgirl643

If it indeed is a software problem and not a hardware problem, you can
resort into doing a system restore, to a time before the problem began...

Do you know how to use system restore to restore your computer to a prior
restore point?

If you have access to another computer perhaps you should test the printer
too just to make sure it is
indeed working...and its not a hardware problem

ALSO I have seen in the past that some times turning a printer on and off
from the button is not enough to make it work sometimes.. you can try
unplugging it for a few minutes from the mains...

tell me if any of this helped you


"showgirl643" <(E-Mail Removed)> wrote in message
news:71DC3AD2-D470-400A-8EAA-(E-Mail Removed)...
>i have had windows vista for about a month , everything was working well
> until my all in one printer hp 2610/3200 photosmart stops working. it
> worked
> until 10:30 am. it seems that something is blocking it. and i need
> according to them Base Smart Card Cryptographic Service Provider from
> microsoft i get error messages when trying to print. it will print for me
> scanning wise i don't know. but hp better get on the ball. does anyone
> have
> any solutions that might help me?
>
> Showgirl643

Showgirl,

Check the event logs, is there anything in there?

Does the printer show up in device manager or the Print Manager?

Do the printer diagnostics on board the printer say everything is OK?

Bill F.

"showgirl643" <(E-Mail Removed)> wrote in message
news:71DC3AD2-D470-400A-8EAA-(E-Mail Removed)...
>i have had windows vista for about a month , everything was working well
> until my all in one printer hp 2610/3200 photosmart stops working. it
> worked
> until 10:30 am. it seems that something is blocking it. and i need
> according to them Base Smart Card Cryptographic Service Provider from
> microsoft i get error messages when trying to print. it will print for me
> scanning wise i don't know. but hp better get on the ball. does anyone
> have
> any solutions that might help me?
>
> Showgirl643

Showgirl43--

1) System restore to a point if you have it, before the printer had problems
is reasonable to try as is unplugging both the plug and the USB cable and
then plugging them in.

2) See if you can print a page by just pressing whatever is the print button
on that printer to test if the printer works on its own without having to
send a message to print from the software to the printer.

3) Examine the trays and make sure there is nothing jammed.

4) See if your printer driver shows in device manager by typing devmgmt.msc
in the run box>enter>and click on View>"show hidden" devices on the toolbar.

5) You could have a driver corrupted and if 1-4 don't pan out, unplug the
printer from your pc and plug it back in. Restart to get the hdw recognized
by Visa, and then either run the Add Hardware Wizard, or in device manager
go to the Printer entry if its there>expand it>right click it>left click
properties>update driver and either let MSFT install the driver or if that
doesn't work, browse to the location of the HP driver folder which is
probably going to be C:\Program Files\Hewlet Packard or sub for C:\
whichever drive you have Vista installed on. That means when Vista asks the
file path you put in C:\Program Files Hewlet Packard after you click the
browse button.

Good luck,

CH

"showgirl643" <(E-Mail Removed)> wrote in message
news:71DC3AD2-D470-400A-8EAA-(E-Mail Removed)...
>i have had windows vista for about a month , everything was working well
> until my all in one printer hp 2610/3200 photosmart stops working. it
> worked
> until 10:30 am. it seems that something is blocking it. and i need
> according to them Base Smart Card Cryptographic Service Provider from
> microsoft i get error messages when trying to print. it will print for me
> scanning wise i don't know. but hp better get on the ball. does anyone
> have
> any solutions that might help me?
>
> Showgirl643