I am building my own slim case, its kinda interesting, I'm going to be
building it out of my old aquarium, a second compartment will house my
CDroms and sit bellow the monitor.

The aquarium is only 3 -4 inches wide in a wavy pattern.

I am thinking of acquiring an AGP riser card to change the orientation of
the video card to be parallel with the motherboard, this would leave
adequate space.

I have a GEforce 3 Ti 128MB. The Riser I am trying to acquire is for a 1U
server chassi and keyed for 1.5V AGP.

I am wondering if there is anything I should know about AGP risers before I
purchase this part?

Thanks,

Aaron

I'm quite certain that my video card will fit my card, the AGP pictured on
the riser is the same as the agp on my mobo

"AJ" <(E-Mail Removed)> wrote in message
news(E-Mail Removed)...
>
> >I am building my own slim case, its kinda interesting, I'm going to be
> >building it out of my old aquarium, a second compartment will house my
> >CDroms and sit bellow the monitor.
> >
> >The aquarium is only 3 -4 inches wide in a wavy pattern.
> >
> >I am thinking of acquiring an AGP riser card to change the orientation of
> >the video card to be parallel with the motherboard, this would leave
> >adequate space.
> >
> >I have a GEforce 3 Ti 128MB. The Riser I am trying to acquire is for a 1U
> >server chassi and keyed for 1.5V AGP.
> >
> >I am wondering if there is anything I should know about AGP risers before
I
> >purchase this part?
> >
> >Thanks,
> >
> >Aaron
> >
> Does your AGP have 2 sections or 3? I was shocked to find my VooDoo5
> AGP would not fit in my new mobo since it only had two sections.
>
> Micro ATX case mod: http://tinyurl.com/iu1n
> _________________________
> When your PC gives a little they give alot:
> http://tinyurl.com/hhez