Hi, all -


I have a system which is giving the error message Entry Point not Found -
Procedure entry point SaferSetLevelInfrmation could not be located in the
dynamic link library advapi32.dll - we get this from winlogon.exe at boot
up, and again when attempting to run quite a few programs. Everything still
*seems* to work, but this is a really annoying error we're getting 30+ times
a day.

The first thing I tried to do was the fix suggested by lukesh on 2/16/05 in
this group - replace the .dll with a known good copy while in safe mode.
This didn't work. I also did a spyware & virus scan - the system turned up
clean.

The current version of this file is 5.0.2195.6876. The previous version,
..6710 was replaced during the install of kb835732 - ms04-011 security
update. I rolled back that patch, but the problem persists with the old
version. I'm also a bit stymied by the fact that this just turned up
yesterday, though no installs were made on the machine. Prime95 says our
DIMM's are OK, and we're not experienceing any other weird behaviour.

Any suggestions?

You could try sfc /scannow command. (Start Button> Run...) You may
have to reinstall some of your hotfixes if you run the command.

John

Rob Gregory wrote:
> Hi, all -
>
>
> I have a system which is giving the error message Entry Point not Found -
> Procedure entry point SaferSetLevelInfrmation could not be located in the
> dynamic link library advapi32.dll - we get this from winlogon.exe at boot
> up, and again when attempting to run quite a few programs. Everything still
> *seems* to work, but this is a really annoying error we're getting 30+ times
> a day.
>
> The first thing I tried to do was the fix suggested by lukesh on 2/16/05 in
> this group - replace the .dll with a known good copy while in safe mode.
> This didn't work. I also did a spyware & virus scan - the system turned up
> clean.
>
> The current version of this file is 5.0.2195.6876. The previous version,
> .6710 was replaced during the install of kb835732 - ms04-011 security
> update. I rolled back that patch, but the problem persists with the old
> version. I'm also a bit stymied by the fact that this just turned up
> yesterday, though no installs were made on the machine. Prime95 says our
> DIMM's are OK, and we're not experienceing any other weird behaviour.
>
> Any suggestions?
>
>

Thanks -

Should have thought of that myself - it fixed the problem.

"John John" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> You could try sfc /scannow command. (Start Button> Run...) You may have
> to reinstall some of your hotfixes if you run the command.
>
> John
>
> Rob Gregory wrote:
>> Hi, all -
>>
>>
>> I have a system which is giving the error message Entry Point not Found -
>> Procedure entry point SaferSetLevelInfrmation could not be located in the
>> dynamic link library advapi32.dll - we get this from winlogon.exe at boot
>> up, and again when attempting to run quite a few programs. Everything
>> still *seems* to work, but this is a really annoying error we're getting
>> 30+ times a day.
>>
>> The first thing I tried to do was the fix suggested by lukesh on 2/16/05
>> in this group - replace the .dll with a known good copy while in safe
>> mode. This didn't work. I also did a spyware & virus scan - the system
>> turned up clean.
>>
>> The current version of this file is 5.0.2195.6876. The previous
>> version, .6710 was replaced during the install of kb835732 - ms04-011
>> security update. I rolled back that patch, but the problem persists with
>> the old version. I'm also a bit stymied by the fact that this just
>> turned up yesterday, though no installs were made on the machine.
>> Prime95 says our DIMM's are OK, and we're not experienceing any other
>> weird behaviour.
>>
>> Any suggestions?
>>

You're welcome. Glad to see you got it fixed.

John

Rob Gregory wrote:

> Thanks -
>
> Should have thought of that myself - it fixed the problem.
>
> "John John" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>
>>You could try sfc /scannow command. (Start Button> Run...) You may have
>>to reinstall some of your hotfixes if you run the command.
>>
>>John
>>
>>Rob Gregory wrote:
>>
>>>Hi, all -
>>>
>>>
>>>I have a system which is giving the error message Entry Point not Found -
>>>Procedure entry point SaferSetLevelInfrmation could not be located in the
>>>dynamic link library advapi32.dll - we get this from winlogon.exe at boot
>>>up, and again when attempting to run quite a few programs. Everything
>>>still *seems* to work, but this is a really annoying error we're getting
>>>30+ times a day.
>>>
>>>The first thing I tried to do was the fix suggested by lukesh on 2/16/05
>>>in this group - replace the .dll with a known good copy while in safe
>>>mode. This didn't work. I also did a spyware & virus scan - the system
>>>turned up clean.
>>>
>>>The current version of this file is 5.0.2195.6876. The previous
>>>version, .6710 was replaced during the install of kb835732 - ms04-011
>>>security update. I rolled back that patch, but the problem persists with
>>>the old version. I'm also a bit stymied by the fact that this just
>>>turned up yesterday, though no installs were made on the machine.
>>>Prime95 says our DIMM's are OK, and we're not experienceing any other
>>>weird behaviour.
>>>
>>>Any suggestions?
>>>
>
>

Hi Rob,

Did you ever find a fix for this? It is now happening to me.

Thanks,

Bruce


John John wrote:
> *You could try sfc /scannow command. (Start Button> Run...) You
> may
> have to reinstall some of your hotfixes if you run the command.
>
> John
>
> Rob Gregory wrote:
> > Hi, all -
> >
> >
> > I have a system which is giving the error message Entry Point not
> Found -
> > Procedure entry point SaferSetLevelInfrmation could not be located
> in the
> > dynamic link library advapi32.dll - we get this from winlogon.exe
> at boot
> > up, and again when attempting to run quite a few programs.
> Everything still
> > *seems* to work, but this is a really annoying error we're getting
> 30+ times
> > a day.
> >
> > The first thing I tried to do was the fix suggested by lukesh on
> 2/16/05 in
> > this group - replace the .dll with a known good copy while in safe
> mode.
> > This didn't work. I also did a spyware & virus scan - the system
> turned up
> > clean.
> >
> > The current version of this file is 5.0.2195.6876. The previous
> version,
> > .6710 was replaced during the install of kb835732 - ms04-011
> security
> > update. I rolled back that patch, but the problem persists with
> the old
> > version. I'm also a bit stymied by the fact that this just turned
> up
> > yesterday, though no installs were made on the machine. Prime95
> says our
> > DIMM's are OK, and we're not experienceing any other weird
> behaviour.
> >
> > Any suggestions?
> >
> > *



--
BruceW
------------------------------------------------------------------------
Posted via http://www.webservertalk.com
------------------------------------------------------------------------
View this thread: http://www.webservertalk.com/message931449.html