I just bought an Advantech SOM-4450 CSB-4004 board from eBay and would
like to experiment with it. The problem is that it did not come with a
manual, even though it was factory sealed from Advantech. I would like
to know which type of 5V adaptor would fit this (i.e which polarity).
The advantech site only gives a basic manual about the 4450 board, but
mine is mounted on a larger board that has VGA/IDE, etc connectors on
it. Does anybody know where I might find the manual?

Thanks,

Paul.

I'm not sure but can't you find that information in the manual from the
official site?

http://www.advantech.com/support/sr_...R_ID=1%2DB3N9U



"*******(E-Mail Removed)" wrote:

> I just bought an Advantech SOM-4450 CSB-4004 board from eBay and would
> like to experiment with it. The problem is that it did not come with a
> manual, even though it was factory sealed from Advantech. I would like
> to know which type of 5V adaptor would fit this (i.e which polarity).
> The advantech site only gives a basic manual about the 4450 board, but
> mine is mounted on a larger board that has VGA/IDE, etc connectors on
> it. Does anybody know where I might find the manual?
>
> Thanks,
>
> Paul.
>
>

Thanks for the reply, but the manual on the web site is woefully
inadequate, and it deals only with the SOM-4450 board itself, not the
board that it sits on (CSB-4004?) that has all the connectors for
power, etc on it.

Any advise would be most welcome,

Paul.

MocoN wrote:
> I'm not sure but can't you find that information in the manual from the
> official site?
>
> http://www.advantech.com/support/sr_...R_ID=1%2DB3N9U
>
>
>
> "*******(E-Mail Removed)" wrote:
>
> > I just bought an Advantech SOM-4450 CSB-4004 board from eBay and would
> > like to experiment with it. The problem is that it did not come with a
> > manual, even though it was factory sealed from Advantech. I would like
> > to know which type of 5V adaptor would fit this (i.e which polarity).
> > The advantech site only gives a basic manual about the 4450 board, but
> > mine is mounted on a larger board that has VGA/IDE, etc connectors on
> > it. Does anybody know where I might find the manual?
> >
> > Thanks,
> >
> > Paul.
> >
> >

I just received a reply from Advantech and they say that the CSB-4004
board is a third party board built to accept the SOM-4450. I am unable
to find the manufacturer, and there are no markings except a 'Made in
Taiwan' sticker. Does anybody know who might have built this board?

Thanks,

Paul.

*******(E-Mail Removed) wrote:
> Thanks for the reply, but the manual on the web site is woefully
> inadequate, and it deals only with the SOM-4450 board itself, not the
> board that it sits on (CSB-4004?) that has all the connectors for
> power, etc on it.
>
> Any advise would be most welcome,
>
> Paul.
>
> MocoN wrote:
> > I'm not sure but can't you find that information in the manual from the
> > official site?
> >
> > http://www.advantech.com/support/sr_...R_ID=1%2DB3N9U
> >
> >
> >
> > "*******(E-Mail Removed)" wrote:
> >
> > > I just bought an Advantech SOM-4450 CSB-4004 board from eBay and would
> > > like to experiment with it. The problem is that it did not come with a
> > > manual, even though it was factory sealed from Advantech. I would like
> > > to know which type of 5V adaptor would fit this (i.e which polarity).
> > > The advantech site only gives a basic manual about the 4450 board, but
> > > mine is mounted on a larger board that has VGA/IDE, etc connectors on
> > > it. Does anybody know where I might find the manual?
> > >
> > > Thanks,
> > >
> > > Paul.
> > >
> > >