I've got some problem which are bugging me for a long time and could not find
the solution.
Is there any way that I could adjust the view (zoom in and out) while I am
working on my page in WYSIWYG?

I had an option before to publish just the changes I made and now I could
not even find it. Anybody knows where it's hiding place?

Thank you.
Vanilla
Enjoy using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
my websiteis: http://www.searchenginelocator.com
"From one small seed of kindness ... friendship grows."

1. No. If your eyesight isn't that good, consider glasses or reduce
the resolution of your screen.

2. File | Publish ... select only changed pages.

Regards Jens Peter Karlsen. Microsoft MVP - Frontpage.

On Fri, 16 Dec 2005 13:24:02 -0800, "Vanilla"
<(E-Mail Removed)> wrote:

>I've got some problem which are bugging me for a long time and could not find
>the solution.
>Is there any way that I could adjust the view (zoom in and out) while I am
>working on my page in WYSIWYG?
>
>I had an option before to publish just the changes I made and now I could
>not even find it. Anybody knows where it's hiding place?
>
>Thank you.
>Vanilla
>Enjoy using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
>my websiteis: http://www.searchenginelocator.com
>"From one small seed of kindness ... friendship grows."

1.) I have my pair of glasses it is not the case. Just I've got used to in
other MS programs I was always able to zoom in and out. I just wanted to
know for sure that this option is available or not. Thanks.
2.) I know when I "Publish Site" it should come up as an option. But as
silly as it sounds I cannot find it now.
Thanks.
--
Vanilla
Using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
http://www.searchenginelocator.com
"From one small seed of kindness ... friendship grows."


"Jens Peter Karlsen [FP-MVP]" wrote:

> 1. No. If your eyesight isn't that good, consider glasses or reduce
> the resolution of your screen.
>
> 2. File | Publish ... select only changed pages.
>
> Regards Jens Peter Karlsen. Microsoft MVP - Frontpage.
>
> On Fri, 16 Dec 2005 13:24:02 -0800, "Vanilla"
> <(E-Mail Removed)> wrote:
>
> >I've got some problem which are bugging me for a long time and could not find
> >the solution.
> >Is there any way that I could adjust the view (zoom in and out) while I am
> >working on my page in WYSIWYG?
> >
> >I had an option before to publish just the changes I made and now I could
> >not even find it. Anybody knows where it's hiding place?
> >
> >Thank you.
> >Vanilla
> >Enjoy using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
> >my websiteis: http://www.searchenginelocator.com
> >"From one small seed of kindness ... friendship grows."
>

In FP2003,
File->Publish Site, or click the Remote Web site tag
Log in
Click Remote Web Site Properties, then Publishing tab
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/


"Vanilla" <(E-Mail Removed)> wrote in message
news:BAA81F75-7178-41EC-B3EF-(E-Mail Removed)...
> 1.) I have my pair of glasses it is not the case. Just I've got
used to in
> other MS programs I was always able to zoom in and out. I just
wanted to
> know for sure that this option is available or not. Thanks.
> 2.) I know when I "Publish Site" it should come up as an option.
But as
> silly as it sounds I cannot find it now.
> Thanks.
> --
> Vanilla
> Using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
> http://www.searchenginelocator.com
> "From one small seed of kindness ... friendship grows."
>
>
> "Jens Peter Karlsen [FP-MVP]" wrote:
>
> > 1. No. If your eyesight isn't that good, consider glasses or
reduce
> > the resolution of your screen.
> >
> > 2. File | Publish ... select only changed pages.
> >
> > Regards Jens Peter Karlsen. Microsoft MVP - Frontpage.
> >
> > On Fri, 16 Dec 2005 13:24:02 -0800, "Vanilla"
> > <(E-Mail Removed)> wrote:
> >
> > >I've got some problem which are bugging me for a long time and
could not find
> > >the solution.
> > >Is there any way that I could adjust the view (zoom in and out)
while I am
> > >working on my page in WYSIWYG?
> > >
> > >I had an option before to publish just the changes I made and now
I could
> > >not even find it. Anybody knows where it's hiding place?
> > >
> > >Thank you.
> > >Vanilla
> > >Enjoy using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
> > >my websiteis: http://www.searchenginelocator.com
> > >"From one small seed of kindness ... friendship grows."
> >

It was easy! Thanks!
--
Vanilla
Using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
http://www.searchenginelocator.com
"From one small seed of kindness ... friendship grows."


"Ronx" wrote:

> In FP2003,
> File->Publish Site, or click the Remote Web site tag
> Log in
> Click Remote Web Site Properties, then Publishing tab
> --
> Ron Symonds - Microsoft MVP (FrontPage)
> Reply only to group - emails will be deleted unread.
> FrontPage Support: http://www.frontpagemvps.com/
>
>
> "Vanilla" <(E-Mail Removed)> wrote in message
> news:BAA81F75-7178-41EC-B3EF-(E-Mail Removed)...
> > 1.) I have my pair of glasses it is not the case. Just I've got
> used to in
> > other MS programs I was always able to zoom in and out. I just
> wanted to
> > know for sure that this option is available or not. Thanks.
> > 2.) I know when I "Publish Site" it should come up as an option.
> But as
> > silly as it sounds I cannot find it now.
> > Thanks.
> > --
> > Vanilla
> > Using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
> > http://www.searchenginelocator.com
> > "From one small seed of kindness ... friendship grows."
> >
> >
> > "Jens Peter Karlsen [FP-MVP]" wrote:
> >
> > > 1. No. If your eyesight isn't that good, consider glasses or
> reduce
> > > the resolution of your screen.
> > >
> > > 2. File | Publish ... select only changed pages.
> > >
> > > Regards Jens Peter Karlsen. Microsoft MVP - Frontpage.
> > >
> > > On Fri, 16 Dec 2005 13:24:02 -0800, "Vanilla"
> > > <(E-Mail Removed)> wrote:
> > >
> > > >I've got some problem which are bugging me for a long time and
> could not find
> > > >the solution.
> > > >Is there any way that I could adjust the view (zoom in and out)
> while I am
> > > >working on my page in WYSIWYG?
> > > >
> > > >I had an option before to publish just the changes I made and now
> I could
> > > >not even find it. Anybody knows where it's hiding place?
> > > >
> > > >Thank you.
> > > >Vanilla
> > > >Enjoy using: MW 2003, Excell 2003, Publisher 2003, FP 2003,
> > > >my websiteis: http://www.searchenginelocator.com
> > > >"From one small seed of kindness ... friendship grows."
> > >
>
>
>