PC Review


Reply
Thread Tools Rate Thread

add new hardware wizard is faulty

 
 
=?Utf-8?B?ZGFmZm1hc3Rlcg==?=
Guest
Posts: n/a
 
      4th Mar 2005
I am trying to install a new internal dvd drive, I cant do so because for the
past couple of months, every time I boot up the new hardware wizard appears
thinking that there is a new printer attached and there isn't one. I can't
install any other non plug and play hardware because of this problem. Can
anyone help. Any help would be much appreciated.
 
Reply With Quote
 
 
 
 
Abhilash Tibrewal\(MCSA\)
Guest
Posts: n/a
 
      4th Mar 2005

Does the "Add New hardware wizard" appears "everytime" you boot the PC or
only when you have connected a new hardware(and new hardware is detected as
a printer?!).

If ANHW appears everytime, you need to check Device Manager for any
problems. Go to Start>Control Panel>System> hardware>Device Manager. Check
if any devices have question or exclamation marks.



"daffmaster" <(E-Mail Removed)> wrote in message
news:60371BE9-94C2-4B9E-8E86-(E-Mail Removed)...
>I am trying to install a new internal dvd drive, I cant do so because for
>the
> past couple of months, every time I boot up the new hardware wizard
> appears
> thinking that there is a new printer attached and there isn't one. I can't
> install any other non plug and play hardware because of this problem. Can
> anyone help. Any help would be much appreciated.



 
Reply With Quote
 
HillBillyBuddhist
Guest
Posts: n/a
 
      4th Mar 2005

"daffmaster" <(E-Mail Removed)> wrote in message
news:60371BE9-94C2-4B9E-8E86-(E-Mail Removed)...
>I am trying to install a new internal dvd drive, I cant do so because for
>the
> past couple of months, every time I boot up the new hardware wizard
> appears
> thinking that there is a new printer attached and there isn't one. I can't
> install any other non plug and play hardware because of this problem. Can
> anyone help. Any help would be much appreciated.


The New Hardware Wizard May Detect the Printer Device After Every Restart of
the Computer;

http://support.microsoft.com/default...b;en-us;298370

--
D

I'm not an MVP a VIP nor do I have ESP.
I was just trying to help.
Please use your own best judgment before implementing any suggestions or
advice herein.
No warranty is expressed or implied.
Your mileage may vary.
See store for details.

Remove shoes to E-mail.


 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hardware wizard, permenantly showing installing new hardware?? =?Utf-8?B?RGF2aWUgU21pdGggV2F0dHM=?= Windows XP Hardware 1 24th Nov 2007 05:45 PM
Hardware installation wizard takes 1 hour for every new piece of hardware... dean Windows XP General 0 21st May 2006 03:46 PM
USB Devices not showing as a hardware type when hardware wizard is triggered by connecting USB Device. Steve Rosen Microsoft Windows 2000 Hardware 1 26th Dec 2004 05:04 PM
USB Devices not showing as a hardware type when hardware wizard is triggered Steve Rosen Microsoft Windows 2000 1 26th Dec 2004 01:13 AM
Found New Hardware Wizard appears with no new hardware installed John Microsoft Windows 2000 Hardware 1 24th Nov 2003 02:33 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 12:07 AM.