PC Review


Reply
Thread Tools Rate Thread

add new drive to network

 
 
PaulH7436
Guest
Posts: n/a
 
      31st Dec 2008
I have a desktop with Vista and a 1TB WD HD attached via usb cable. My
laptop has XP Home. I use MS One Care for the networking and would like to
add the usb drive to the network to make the backups automatic. It is
already working fine on the desktop. I have been unable to get the laptop to
recognize the USB drive. I have tried the help screens in One Care to no
avail. Any suggestions are greatly appreciated. Thanks!
 
Reply With Quote
 
 
 
 
D Lirious
Guest
Posts: n/a
 
      31st Dec 2008
You need to allow sharing on the USB drive, which is not as straight forward
a proposition on Vista as it is in XP, but what is?
In addition to simply allowing sharing you have to allow ownership rights.
Why? Because the brain trust that designed the speedy, efficient and easy to
use WOW! that is Vista says so.
The choices that will be displayed are non-descriptive and non-intuitive and
if you are not basically familiar with network arcana then rotsa ruck,
fella.
Also, even if you get all the settings right, the next time you power down
the computer or USB drive all those settings are gone and have to be reset.
I can't wait to pay for Vista SP3, oops, I mean Windows 7.

 
Reply With Quote
 
Timothy Davis [MSFT]
Guest
Posts: n/a
 
      1st Jan 2009
Do you need a hug?
 
Reply With Quote
 
Timothy Davis [MSFT]
Guest
Posts: n/a
 
      1st Jan 2009
> I have been unable to get the laptop to recognize the USB drive.

This statement is confusing to me: Do you mean that you plugged the USB
drive into the laptop? Or do you mean that you cannot access the device
over the network?

If you are unable to connect to the drive over the network, try following
the sharing suggestions linked below:

http://www.vista4beginners.com/share-files-and-folders



"PaulH7436" <(E-Mail Removed)> wrote in message
news:5B7F9C3A-8FBB-4991-A6EF-(E-Mail Removed)...
>I have a desktop with Vista and a 1TB WD HD attached via usb cable. My
> laptop has XP Home. I use MS One Care for the networking and would like
> to
> add the usb drive to the network to make the backups automatic. It is
> already working fine on the desktop. I have been unable to get the laptop
> to
> recognize the USB drive. I have tried the help screens in One Care to no
> avail. Any suggestions are greatly appreciated. Thanks!


 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
synchronize network drive, lost hard drive free space bfot123@gmail.com Windows XP General 1 7th Oct 2007 10:15 PM
Network drive (home drive) not staying connected to proper folder. =?Utf-8?B?UmFuZG9tTnVtYmVyIEdlbmVyYXRvcg==?= Windows XP Networking 1 22nd May 2007 09:31 PM
Network drive is displayed as "Disconnected Network Drive" is connected Tony Windows XP Performance 0 26th Aug 2004 03:05 PM
How do I configure XP-Home Edition in a network to automatic log on to a mapped network drive. =?Utf-8?B?UGlzdG9sIFBldGU=?= Windows XP Networking 1 25th Jan 2004 08:07 PM
Local folder mapped as network drive goes away if no network device active Ken Doerbecker Windows XP General 2 7th Dec 2003 11:01 AM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 12:06 AM.