OK...one more try...I let windows search for a driver for the other question
mark with an exclamation point and let it install another proper PCI
controller. Now when I open the device manager there are no question marks.
However, after rebooting, the Add Hardware still reports that another device
is being installed and that I must wait until it has completed that before
launching the wizard.
Still not working.
"Lloyd Goldberg" <(E-Mail Removed)> wrote in message
news:YQ7dd.5674$233.878@okepread05...
> Additional info:
>
> I let windows search for a proper driver for the PCI Cardbus Bridge and it
> added a PMCIA adapter. However, even after uninstalling both PCI to
> Cardbus Bridge incidents listed in the Other devices, one of these comes
> back as soon as I reboot. After the uninstall, but before rebooting, I
> tried the add hardware wizard. It still tells me it is busy installing
> other equipment.
>
>
>
> "Lloyd Goldberg" <(E-Mail Removed)> wrote in message
> news:9x7dd.5673$233.1973@okepread05...
>> Yes,
>>
>> There is a yellow question mark with a circle and exclamation point in it
>> for the PCI to CARDBUS Bridge. There are two of them in the "Other
>> Devices" category.
>>
>>
>>
>> "Michael Ortega" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>> Hello,
>>>
>>> Interesting..... Open up device manager, do you see any yellow bubbles
>>> with a "?" in them? If so what do they say and where are they in the
>>> tree of devices?
>>>
>>> to get to task manager: press winkey + pause break > click the Hardware
>>> tab
>>> > then Device Manager
>>>
>>> --
>>> -----------------------------------------
>>> Michael Ortega
>>>
>>> "Lloyd Goldberg" <(E-Mail Removed)> wrote in message
>>> news:OXWcd.44829$UA.32027@lakeread08...
>>>> Unfortunately that's not the case this time. After waiting, the message
>>>> pops
>>>> up that the hardware installer is busy installing another piece of
>>>> hardware
>>>> and I should wait until that is done before attempting to install this
>>>> one.
>>>>
>>>>
>>>> "Michael Ortega" <(E-Mail Removed)> wrote in message
>>>> news:(E-Mail Removed)...
>>>>> Hello,
>>>>>
>>>>> If your using XP and your just trying to get a USB memory stick to
>>>>> install, you dont actually have to do anything. Just plug it and in a
>>>>> few seconds XP will automatically install the proper drivers for it.
>>>>> Then you can open up My Computer and you will see your memory stick
>>>>> there under Removable Disk Driver(or something to that nature).
>>>>>
>>>>> --
>>>>> -----------------------------------------
>>>>> Michael Ortega
>>>>>
>>>>> "Lloyd Goldberg" <(E-Mail Removed)> wrote in message
>>>>> news:KTTcd.44820$UA.39770@lakeread08...
>>>>>>I am running WinXP and when I attempt to add hardware using the
>>>>>>wizard, I receive a message that the installer is already running and
>>>>>>cannot add additional hardware until it has completed installing. When
>>>>>>I go to task manager after clicking on the wizard, the intaller is
>>>>>>running. Before clicking on the wizard task manager does not show it
>>>>>>running.
>>>>>>
>>>>>> Any advice on getting this to install new hardware. I am trying to
>>>>>> get a USB memory stick to work. The driver is already on the
>>>>>> computer.
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
|
Similar Threads
