"JS" <@> wrote in message news:(E-Mail Removed)...
> Thanks for your reply, it's my fault that I didn't make my request clear.
>
> Want I want to do is to install True Image on the drive partition (C
> that contains Windows XP SP2. Create an image file of that partition and
> have it stored/created either on the second partition of the same hard
> drive or a second hard drive.
>
> Since I'm doing some extreme tests involving Windows and SP3 and if in a
> worse case scenario Windows (the C: partition) is no longer bootable, I
> would like to use a bootable CD of True Image (Ghost calls it a recovery
> CD) so that I can restore the C: partition using the image backup file
> that is located on another partition or drive.
>
> I have done this a number of times using Ghost but this time I'd like to
> see just how good True Image is.
>
> JS
>
> "Timothy Daniels" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> "- Bobb -" wrote
>>> "JS" <@> wrote:
>>>>I plan to do some testing which will require a baseline (clean install
>>>>of Windows XP with SP2) image that I can restore to an newly formatted
>>>>partition multiple times. I have Norton Ghost but thought I'd try True
>>>>Image (the 15 day free trial version).
>>>>
>>>> Question is, does the trial version allow you to create a True Image
>>>> boot CD than can be used to restore a partition from a baseline image
>>>> file stored on another partition. If the trial version does have this
>>>> feature any tips on creating the boot CD would be helpful.
>>>>
>>>> JS
>>>>
>>>>
>>>
>>> I beta tested Version 11 (which was free then) and I did just that.
>>> Checking their website and it shows no difference between 'bought' vs
>>> 'trial' edition - just length of license.
>>> look at chapter 6 here:
>>> http://us1.download.acronis.com/pdf/...ge11_ug.en.pdf
>>>
>>> If you'd like to ask them before downloading, they were helpful to me
>>> last year:
>>> http://www.acronis.com/company/conta...index.html?t=1
>>
>>
>> I believe the OP wants to make a bootable CD, that is, you
>> put the CD that contains the backup image in the optical drive slot,
>> and it loads the image itself. He doesn't want to have to load the
>> Acronis True Image CD first or have it permanently installed on his
>> system.
>>
>> *TimDaniels*
>>
>
>
After you install ATI, you create a rescue CD.
You backup the system partition to a file on another disk.
You set the BIOS to boot from the CD first.
You shutdown and reboot.
You then restore the file you just created to wherever you wish.
The system disk on my laptop holds 60 GB.
It takes 11 minutes to write the file.
It doesn't take near that long to fiddle with the BIOS
It takes 11 minutes to restore the systme.
Windows on my computer occupies 12 GB.
I don't use a special partition on the system disk. I believe that if I
need to restore XP, it will most likely be caused by a hard drive failure.
Such a failure does not make me want to use the disk anymore.
Jim