Previously, my system worked normally. Today, I uninstalled the "File and
Printer Sharing for Microsoft Network" by mistake, and click the "close"
button in the right corner of connection property dialogbox immediately, but
the dialogbox is hangup, so what can I do is rebooting the PC.
But thereafter, I never can access the share folder of the other PC,
even if I uninstall & re-install the ""File and Printer Sharing for Microsoft
Network". It always report the "\\10.74.52.11 The network path was not
found." or some word like "\\10.74.52.11 The network can not reached".
I capture the packet from the network interface, and found that when I
access the share folder, the windows will connect to the 80 port of the
target host. this is just like the HTTP manner.

If someone could help me, I'm very appreciate for you.

After re-install the ""File and Printer Sharing for Microsoft Network", have
you re-enable sharing on the shared folders? please post back with the
result.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Kelvin You" <(E-Mail Removed)> wrote in message
news:030F25C8-FE5E-4088-AEDE-(E-Mail Removed)...
> Previously, my system worked normally. Today, I uninstalled the "File and
> Printer Sharing for Microsoft Network" by mistake, and click the "close"
> button in the right corner of connection property dialogbox immediately,
> but
> the dialogbox is hangup, so what can I do is rebooting the PC.
> But thereafter, I never can access the share folder of the other PC,
> even if I uninstall & re-install the ""File and Printer Sharing for
> Microsoft
> Network". It always report the "\\10.74.52.11 The network path was not
> found." or some word like "\\10.74.52.11 The network can not reached".
> I capture the packet from the network interface, and found that when I
> access the share folder, the windows will connect to the 80 port of the
> target host. this is just like the HTTP manner.
>
> If someone could help me, I'm very appreciate for you.
>
>
>
>

Sure, the sharing folder is on another host, everyone expect me could access
it in our LAN. If I enter "\\10.74.52.11" in the "Run" window, windows will
send "TCP-syn" to the 80 port of the host '10.74.52.11', of course, this is
unreachable.

"Robert L. (MS-MVP)" wrote:

> After re-install the ""File and Printer Sharing for Microsoft Network", have
> you re-enable sharing on the shared folders? please post back with the
> result.
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "Kelvin You" <(E-Mail Removed)> wrote in message
> news:030F25C8-FE5E-4088-AEDE-(E-Mail Removed)...
> > Previously, my system worked normally. Today, I uninstalled the "File and
> > Printer Sharing for Microsoft Network" by mistake, and click the "close"
> > button in the right corner of connection property dialogbox immediately,
> > but
> > the dialogbox is hangup, so what can I do is rebooting the PC.
> > But thereafter, I never can access the share folder of the other PC,
> > even if I uninstall & re-install the ""File and Printer Sharing for
> > Microsoft
> > Network". It always report the "\\10.74.52.11 The network path was not
> > found." or some word like "\\10.74.52.11 The network can not reached".
> > I capture the packet from the network interface, and found that when I
> > access the share folder, the windows will connect to the 80 port of the
> > target host. this is just like the HTTP manner.
> >
> > If someone could help me, I'm very appreciate for you.
> >
> >
> >
> >
>

If other computers can access the host but your, it could be a security
software running on the host computer. try to start the host and your
computer clean booting. This how to may help,

How to run Windows OS with a clean ...With MSCONFIG, you also can configure
a clean boot to disable common startup ... To perform a clean boot, please
follow these steps: 1) Run MSCONFIG.EXE. ...
www.chicagotech.net/netforums/viewtopic.php?t=57


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Kelvin You" <(E-Mail Removed)> wrote in message
news:AD756257-5EBA-4440-805E-(E-Mail Removed)...
> Sure, the sharing folder is on another host, everyone expect me could
> access
> it in our LAN. If I enter "\\10.74.52.11" in the "Run" window, windows
> will
> send "TCP-syn" to the 80 port of the host '10.74.52.11', of course, this
> is
> unreachable.
>
> "Robert L. (MS-MVP)" wrote:
>
>> After re-install the ""File and Printer Sharing for Microsoft Network",
>> have
>> you re-enable sharing on the shared folders? please post back with the
>> result.
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>>
>>
>> "Kelvin You" <(E-Mail Removed)> wrote in message
>> news:030F25C8-FE5E-4088-AEDE-(E-Mail Removed)...
>> > Previously, my system worked normally. Today, I uninstalled the "File
>> > and
>> > Printer Sharing for Microsoft Network" by mistake, and click the
>> > "close"
>> > button in the right corner of connection property dialogbox
>> > immediately,
>> > but
>> > the dialogbox is hangup, so what can I do is rebooting the PC.
>> > But thereafter, I never can access the share folder of the other PC,
>> > even if I uninstall & re-install the ""File and Printer Sharing for
>> > Microsoft
>> > Network". It always report the "\\10.74.52.11 The network path was
>> > not
>> > found." or some word like "\\10.74.52.11 The network can not reached".
>> > I capture the packet from the network interface, and found that when
>> > I
>> > access the share folder, the windows will connect to the 80 port of the
>> > target host. this is just like the HTTP manner.
>> >
>> > If someone could help me, I'm very appreciate for you.
>> >
>> >
>> >
>> >
>>

It's a pity, your solution is useless. How can I entirely re-install the file
and printer sharing function? It's no effective with the normal approach.

I tried this: I shared some local folder first, and execute the cmd.exe
=======================================
> net view \\localhost
The Workstation service has not been started.

More help is available by typing NET HELPMSG 2138.
=====================================
What does it stand for?



"Robert L. (MS-MVP)" wrote:

> If other computers can access the host but your, it could be a security
> software running on the host computer. try to start the host and your
> computer clean booting. This how to may help,
>
> How to run Windows OS with a clean ...With MSCONFIG, you also can configure
> a clean boot to disable common startup ... To perform a clean boot, please
> follow these steps: 1) Run MSCONFIG.EXE. ...
> www.chicagotech.net/netforums/viewtopic.php?t=57
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "Kelvin You" <(E-Mail Removed)> wrote in message
> news:AD756257-5EBA-4440-805E-(E-Mail Removed)...
> > Sure, the sharing folder is on another host, everyone expect me could
> > access
> > it in our LAN. If I enter "\\10.74.52.11" in the "Run" window, windows
> > will
> > send "TCP-syn" to the 80 port of the host '10.74.52.11', of course, this
> > is
> > unreachable.
> >
> > "Robert L. (MS-MVP)" wrote:
> >
> >> After re-install the ""File and Printer Sharing for Microsoft Network",
> >> have
> >> you re-enable sharing on the shared folders? please post back with the
> >> result.
> >>
> >> --
> >> Bob Lin, MS-MVP, MCSE & CNE
> >> Networking, Internet, Routing, VPN Troubleshooting on
> >> http://www.ChicagoTech.net
> >> How to Setup Windows, Network, VPN & Remote Access on
> >> http://www.HowToNetworking.com
> >>
> >>
> >> "Kelvin You" <(E-Mail Removed)> wrote in message
> >> news:030F25C8-FE5E-4088-AEDE-(E-Mail Removed)...
> >> > Previously, my system worked normally. Today, I uninstalled the "File
> >> > and
> >> > Printer Sharing for Microsoft Network" by mistake, and click the
> >> > "close"
> >> > button in the right corner of connection property dialogbox
> >> > immediately,
> >> > but
> >> > the dialogbox is hangup, so what can I do is rebooting the PC.
> >> > But thereafter, I never can access the share folder of the other PC,
> >> > even if I uninstall & re-install the ""File and Printer Sharing for
> >> > Microsoft
> >> > Network". It always report the "\\10.74.52.11 The network path was
> >> > not
> >> > found." or some word like "\\10.74.52.11 The network can not reached".
> >> > I capture the packet from the network interface, and found that when
> >> > I
> >> > access the share folder, the windows will connect to the 80 port of the
> >> > target host. this is just like the HTTP manner.
> >> >
> >> > If someone could help me, I'm very appreciate for you.
> >> >
> >> >
> >> >
> >> >
> >>
>