PC Review


Reply
Thread Tools Rate Thread

A8N-SLI Deluxe and memory reporting in XP

 
 
Randy Starkey
Guest
Posts: n/a
 
      19th Apr 2005
Hi,

I have a new A8N-SLI Deluxe board with 4 gigs of memory installed. 2 pairs
of Kingston 1gig matched kits. The bios reports 4 gig fine, but Windows XP
will only report 3 gig.

Anyone know why?

Thanks!

--Randy Starkey


 
Reply With Quote
 
 
 
 
Paul
Guest
Posts: n/a
 
      19th Apr 2005
In article <(E-Mail Removed)>, "Randy Starkey"
<(E-Mail Removed)> wrote:

> Hi,
>
> I have a new A8N-SLI Deluxe board with 4 gigs of memory installed. 2 pairs
> of Kingston 1gig matched kits. The bios reports 4 gig fine, but Windows XP
> will only report 3 gig.
>
> Anyone know why?
>
> Thanks!
>
> --Randy Starkey


Getting to use all the memory is actually pretty complicated.

In terms of the address space, the PCI/AGP/PCI-Express busses
all need some addressing space, out of the total available to
the processor. Typically, when some of these busses are present
in a system, they "punch" a hole in the address space.

On a pure 32 bit system, the maximum address space available is
4GB, and if you stick 4GB of memory in such a system, some of
the memory is ignored. If accesses are made to areas around
3.2GB or higher, up to the 4GB mark, those accesses point to
PCI/AGP/PCI-Express hardware devices.

Now, your system is a 64 bit system. If you have the right
version of BIOS flashed into the BIOS chip, there is a setting
that controls "memory hoisting". Memory hoisting lifts the
wasted memory, above the 4GB mark, and makes it possible to
have address space for system bus access, and all of memory,
available at the same time. I believe the system memory is
remapped (virtual memory space), so that the memory can look
contiguous.

The next issue, is at the OS level. There are various limits
as to what the OS will do, when memory is made available above
4GB. There is also an issue, with the split between user
space and kernel space. (Note - at this point, you may need
a server version of an OS, to gain access to memory above
the 4GB addressing mark, so there is no free lunch.)

If you use a /3GB option in boot.ini, I think that changes
the user/kernel split, to 3GB/1GB, instead of the normal
2GB/2GB split.

As well, there is a competing idea, which is the use of
addressing extensions, that make it possible to access
memory above the 4GB address mark. /PAE is an option you
would use, if a processor supported the PAE extension.

http://support.microsoft.com/default...b;en-us;268363

The bottom part of this post explains some of this better
than I can. You should also search the Microsoft KB for
info on PAE, AWE, /3GB and so on, to get the full story.

http://groups.google.ca/groups?threa...0uni-berlin.de

Paying for an OS to make this happen, might cost more than
the memory you just bought. I believe there are some versions
of Linux that can provide an (almost) free lunch. Good luck
in your research - if you learn anything useful to future
4GB memory purchasers, please post back so all can benefit.

HTH,
Paul
 
Reply With Quote
 
RJT
Guest
Posts: n/a
 
      19th Apr 2005
Paul wrote:

>>I have a new A8N-SLI Deluxe board with 4 gigs of memory installed. 2 pairs
>>of Kingston 1gig matched kits. The bios reports 4 gig fine, but Windows XP
>>will only report 3 gig.
>>
>>Anyone know why?


> Now, your system is a 64 bit system.


Where did he say he was using a 64bit OS?

RJT
 
Reply With Quote
 
RJT
Guest
Posts: n/a
 
      19th Apr 2005
Paul wrote:

>>I have a new A8N-SLI Deluxe board with 4 gigs of memory installed. 2 pairs
>>of Kingston 1gig matched kits. The bios reports 4 gig fine, but Windows XP
>>will only report 3 gig.
>>
>>Anyone know why?


> Now, your system is a 64 bit system.

<snip>
> The next issue, is at the OS level.


Just for the record: which version of XP is he running? That would seem
to matter I'd think.
 
Reply With Quote
 
Randy Starkey
Guest
Posts: n/a
 
      20th Apr 2005
Hi all,

Thanks for the thoughts. I'm running XP Pro SP2. I do also own Server 2003.
Sounds like this is a multi-pronged issue. I need a good stable board, so I
may just accept the 3 gig level for now. WinXP64 is not far away, and maybe
that will simply solve it. There is some setting in the BIOS (I'm using the
latest - rev 1006) that says something about a "hole". It defaults off and I
turned it on, but it doesn't seem to matter much. Haven't messed with
BOOT.INI.

--Randy


"RJT" <(E-Mail Removed)> wrote in message
news:d43mfi$2p3$(E-Mail Removed)...
> Paul wrote:
>
>>>I have a new A8N-SLI Deluxe board with 4 gigs of memory installed. 2
>>>pairs of Kingston 1gig matched kits. The bios reports 4 gig fine, but
>>>Windows XP will only report 3 gig.
>>>
>>>Anyone know why?

>
>> Now, your system is a 64 bit system.

> <snip>
>> The next issue, is at the OS level.

>
> Just for the record: which version of XP is he running? That would seem to
> matter I'd think.



 
Reply With Quote
 
 
 
Reply

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Memory slot and memory problem on K8V SE Deluxe Gilles Vollant Asus Motherboards 1 13th May 2005 10:40 AM
A7N8X-E Deluxe reporting an XP 3200 as Sempron 2200hz with 1012-e bios Eric Feinstein Asus Motherboards 5 30th Sep 2004 04:55 AM
Coolermaster Aero fan not reporting on A7N8X-Deluxe. Vormulac Asus Motherboards 9 17th Jul 2004 12:15 AM
P4P800-E Deluxe or P4C800-E Deluxe & memory ? Barry Asus Motherboards 12 13th Apr 2004 08:41 PM
memory reporting in xp John Windows XP Hardware 0 9th Aug 2003 02:09 PM


Features
 

Advertising
 

Newsgroups
 


All times are GMT +1. The time now is 05:04 PM.