I was wanting to know what the best way to test this motherboard is? The
system has the A7S333 MB, AMD XP2000+ CPU, 256MB DDR memory and a Maxtor
40GB HD and Windows XP Home with Service Pack 1. I keep getting Blue screens
for various reason but the most often one is Page Fault in Non Paged Area/
It is a Stop 0x50.
I tried changing RAM but it only helped some so that it didn't happen as
often. It has an Asus V7100 video card and I changed it out with a different
one. Any Ideas?
--
Thanks
Vic

Vic wrote:
> I was wanting to know what the best way to test this motherboard is? The
> system has the A7S333 MB, AMD XP2000+ CPU, 256MB DDR memory and a Maxtor
> 40GB HD and Windows XP Home with Service Pack 1. I keep getting Blue screens
> for various reason but the most often one is Page Fault in Non Paged Area/
> It is a Stop 0x50.
> I tried changing RAM but it only helped some so that it didn't happen as
> often. It has an Asus V7100 video card and I changed it out with a different
> one. Any Ideas?
> --
> Thanks
> Vic
>
>
You could try moving your RAM to a different slot to rule out any
possiblity that you have a bad slot. Unless you're using DDR2700 you
can use any combo of slots in the board. Hope this helps.