New build using A7N8X ver. 2.0 & running XP Pro. When I try to play
sounds-- cd, harddrive, or bootup, I get no sound. When trying songs on hd,
or cd's, get message on WinMedPlayer that "Cannot playback audio stream. No
audio hardware available or not responding."
All devices in device driver show working correctly.
Special circumstances caused me to 'cable' as follows: IDE1: h/d-1 as pri.
master & h/d2 as pri. slave. IDE2: cd-rw as sec. master & cd-rom as
sec.slave.
To set up from start, I used IDE1 with hd1 as pri. master and cdrom as
pri. slave--and nothing on IDE2. Then recabled to above configuration. (I
had lots of info on hd 2 whose mobo went bad on another system--hence the
motive to make it slave off hd1 in new system. It would not boot just
installing hd1, full of info, as pri. master in new system.)
HELP! All suggestions welcome. sdlomi
BTW: The XP2100, w/128mg generic 2100DDR, runs fine otherwise at 13X166,
XP2600 I guess.. Tried no other settings yet.

sdlomi wrote:
> New build using A7N8X ver. 2.0 & running XP Pro. When I try to play
> sounds-- cd, harddrive, or bootup, I get no sound. When trying songs on hd,
> or cd's, get message on WinMedPlayer that "Cannot playback audio stream. No
> audio hardware available or not responding."
> All devices in device driver show working correctly.
> Special circumstances caused me to 'cable' as follows: IDE1: h/d-1 as pri.
> master & h/d2 as pri. slave. IDE2: cd-rw as sec. master & cd-rom as
> sec.slave.
> To set up from start, I used IDE1 with hd1 as pri. master and cdrom as
> pri. slave--and nothing on IDE2. Then recabled to above configuration. (I
> had lots of info on hd 2 whose mobo went bad on another system--hence the
> motive to make it slave off hd1 in new system. It would not boot just
> installing hd1, full of info, as pri. master in new system.)
> HELP! All suggestions welcome. sdlomi
> BTW: The XP2100, w/128mg generic 2100DDR, runs fine otherwise at 13X166,
> XP2600 I guess.. Tried no other settings yet.
>
>
What audio drivers did you install?

"Barry Walsh" <(E-Mail Removed)> wrote in message
news:3f9b2ce1$0$22355$(E-Mail Removed)...
> sdlomi wrote:
> > New build using A7N8X ver. 2.0 & running XP Pro. When I try to play
> > sounds-- cd, harddrive, or bootup, I get no sound. When trying songs on
hd,
> > or cd's, get message on WinMedPlayer that "Cannot playback audio stream.
No
> > audio hardware available or not responding."
> > All devices in device driver show working correctly.
> > Special circumstances caused me to 'cable' as follows: IDE1: h/d-1 as
pri.
> > master & h/d2 as pri. slave. IDE2: cd-rw as sec. master & cd-rom as
> > sec.slave.
> > To set up from start, I used IDE1 with hd1 as pri. master and cdrom
as
> > pri. slave--and nothing on IDE2. Then recabled to above configuration.
(I
> > had lots of info on hd 2 whose mobo went bad on another system--hence
the
> > motive to make it slave off hd1 in new system. It would not boot just
> > installing hd1, full of info, as pri. master in new system.)
> > HELP! All suggestions welcome. sdlomi
> > BTW: The XP2100, w/128mg generic 2100DDR, runs fine otherwise at 13X166,
> > XP2600 I guess.. Tried no other settings yet.
> >
> >
> What audio drivers did you install?
>
Not sure--whatever camer on the cd with the motherboard, I guess. What
should I install? Thanks, Barry. Sam

sdlomi wrote:

> "Barry Walsh" <(E-Mail Removed)> wrote in message
> news:3f9b2ce1$0$22355$(E-Mail Removed)...
>
>>sdlomi wrote:
>>
>>> New build using A7N8X ver. 2.0 & running XP Pro. When I try to play
>>>sounds-- cd, harddrive, or bootup, I get no sound. When trying songs on
>
> hd,
>
>>>or cd's, get message on WinMedPlayer that "Cannot playback audio stream.
>
> No
>
>>>audio hardware available or not responding."
>>> All devices in device driver show working correctly.
>>>Special circumstances caused me to 'cable' as follows: IDE1: h/d-1 as
>
> pri.
>
>>>master & h/d2 as pri. slave. IDE2: cd-rw as sec. master & cd-rom as
>>>sec.slave.
>>> To set up from start, I used IDE1 with hd1 as pri. master and cdrom
>
> as
>
>>>pri. slave--and nothing on IDE2. Then recabled to above configuration.
>
> (I
>
>>>had lots of info on hd 2 whose mobo went bad on another system--hence
>
> the
>
>>>motive to make it slave off hd1 in new system. It would not boot just
>>>installing hd1, full of info, as pri. master in new system.)
>>> HELP! All suggestions welcome. sdlomi
>>>BTW: The XP2100, w/128mg generic 2100DDR, runs fine otherwise at 13X166,
>>>XP2600 I guess.. Tried no other settings yet.
>>>
>>>
>>
>>What audio drivers did you install?
>>
>
> Not sure--whatever camer on the cd with the motherboard, I guess. What
> should I install? Thanks, Barry. Sam
>
>
Go to nvidia.com and download the more up to date 2.45 unified driver
set and install those. If possible uninstall the set off the CD that you
already have installed, if this can't be done don't worry as most people
report no problems when installing the newer ones over the old ones.

"Barry Walsh" <(E-Mail Removed)> wrote in message
news:3f9c0ead$0$249$(E-Mail Removed)...
> sdlomi wrote:
>
> > "Barry Walsh" <(E-Mail Removed)> wrote in message
> > news:3f9b2ce1$0$22355$(E-Mail Removed)...
> >
> >>sdlomi wrote:
> >>
> >>> New build using A7N8X ver. 2.0 & running XP Pro. When I try to
play
> >>>sounds-- cd, harddrive, or bootup, I get no sound. When trying songs
on
> >
> > hd,
> >
> >>>or cd's, get message on WinMedPlayer that "Cannot playback audio
stream.
> >
> > No
> >
> >>>audio hardware available or not responding."
> >>> All devices in device driver show working correctly.
> >>>Special circumstances caused me to 'cable' as follows: IDE1: h/d-1 as
> >
> > pri.
> >
> >>>master & h/d2 as pri. slave. IDE2: cd-rw as sec. master & cd-rom as
> >>>sec.slave.
> >>> To set up from start, I used IDE1 with hd1 as pri. master and cdrom
> >
> > as
> >
> >>>pri. slave--and nothing on IDE2. Then recabled to above configuration.
> >
> > (I
> >
> >>>had lots of info on hd 2 whose mobo went bad on another system--hence
> >
> > the
> >
> >>>motive to make it slave off hd1 in new system. It would not boot just
> >>>installing hd1, full of info, as pri. master in new system.)
> >>> HELP! All suggestions welcome. sdlomi
> >>>BTW: The XP2100, w/128mg generic 2100DDR, runs fine otherwise at
13X166,
> >>>XP2600 I guess.. Tried no other settings yet.
> >>>
> >>>
> >>
> >>What audio drivers did you install?
> >>
> >
> > Not sure--whatever camer on the cd with the motherboard, I guess.
What
> > should I install? Thanks, Barry. Sam
> >
> >
> Go to nvidia.com and download the more up to date 2.45 unified driver
> set and install those. If possible uninstall the set off the CD that you
> already have installed, if this can't be done don't worry as most people
> report no problems when installing the newer ones over the old ones.
>
Thx, going to attempt it very soon--sam

On Sun, 26 Oct 2003 18:13:15 +0000, Barry Walsh
<(E-Mail Removed)> wrote:
Can't find drivers for A7N8x Deluxe site only shows 2.41 driver ver.
and they state that it will not support win 98 only 98se etc.

drivers that came with the board load with a ? mark in control manager
and I have been playing around with installing the drivers but no
sound same problem as the other guy......gee I would love for these
things to friggen work out of the box, just once,,,well I did have one
of those, it was an abit on a socket 7 great platform for its day...o
well......
>nvidia.com

Bin There wrote:
> On Sun, 26 Oct 2003 18:13:15 +0000, Barry Walsh
> <(E-Mail Removed)> wrote:
> Can't find drivers for A7N8x Deluxe site only shows 2.41 driver ver.
> and they state that it will not support win 98 only 98se etc.
>
> drivers that came with the board load with a ? mark in control manager
> and I have been playing around with installing the drivers but no
> sound same problem as the other guy......gee I would love for these
> things to friggen work out of the box, just once,,,well I did have one
> of those, it was an abit on a socket 7 great platform for its day...o
> well......
>
>>nvidia.com
>
>
These are the latest for 9x

ftp://ftp.asus.com.tw/pub/ASUS/misc/...f2_v264_9x.zip
ftp://ftp.asus.com.tw/pub/ASUS/misc/...f2_v264_me.zip

And these are for 2k/XP

ftp://ftp.asus.com.tw/pub/ASUS/misc/...64_WDM2000.zip
ftp://ftp.asus.com.tw/pub/ASUS/misc/...v264_WDMxp.zip

See if these produce any difference. There are also a set marked 2.78 on
the float but they're badly out of date despite what the version number
suggests.