Hi all,

I just build a now box with an Asus A7N8X-E Deluxe and a CoolerMaster
realpower 450w psu. I am unfamiliar with what levels are appropriate as read
by the Probe utility.

values +12V - 12.416
+5V - 4.757
+3.3V - 3.28

they fluctuate some, but the +5 and +3.3 is consistently under the value. Is
this problematic? should I RMA the PSU or perform other tests directly on
the PSU?

Thanks in advance for any advice.

--
Tom Wendelken


--
Tom

Nothing to worry about. The last 2 power supplies in my older (6 months)
systems varied in voltage readings. One had 12.3, this one shows 11.12
I have checked the voltage with a meter and the one showing 11.12 is
actually 11.9.



"tawpgk" <(E-Mail Removed)> wrote in message
news:znPud.850$(E-Mail Removed)...
> Hi all,
>
> I just build a now box with an Asus A7N8X-E Deluxe and a CoolerMaster
> realpower 450w psu. I am unfamiliar with what levels are appropriate as
> read by the Probe utility.
>
> values +12V - 12.416
> +5V - 4.757
> +3.3V - 3.28
>
> they fluctuate some, but the +5 and +3.3 is consistently under the value.
> Is this problematic? should I RMA the PSU or perform other tests directly
> on the PSU?
>
> Thanks in advance for any advice.
>
> --
> Tom Wendelken
>
>
> --
> Tom
>

Thanks a lot Ron. I am giving this puter to my Godchild and am moving across
country soon, and I didn't want to leave her with a problem!

--
Tom Wendelken
University of Phoenix Student
(E-Mail Removed) yahoo: tawpgk
Eastern Time Zone (New Jersey)
"RonK" <I'(E-Mail Removed)> wrote in message
news:s%Pud.87793$l%(E-Mail Removed)...
> Nothing to worry about. The last 2 power supplies in my older (6 months)
> systems varied in voltage readings. One had 12.3, this one shows 11.12
> I have checked the voltage with a meter and the one showing 11.12 is
> actually 11.9.
>
>
>
> "tawpgk" <(E-Mail Removed)> wrote in message
> news:znPud.850$(E-Mail Removed)...
>> Hi all,
>>
>> I just build a now box with an Asus A7N8X-E Deluxe and a CoolerMaster
>> realpower 450w psu. I am unfamiliar with what levels are appropriate as
>> read by the Probe utility.
>>
>> values +12V - 12.416
>> +5V - 4.757
>> +3.3V - 3.28
>>
>> they fluctuate some, but the +5 and +3.3 is consistently under the value.
>> Is this problematic? should I RMA the PSU or perform other tests directly
>> on the PSU?
>>
>> Thanks in advance for any advice.
>>
>> --
>> Tom Wendelken
>>
>>
>> --
>> Tom
>>
>
>