Hi there

I want to improve my pic quality on my 9700
by modding the vga output electroncs
Does anybody have any schematics or examples how to do that.
I want to make a BNC mod for RGBHV output getting the signal as close from
the chip as possible.
I don`t want to use an adon card or premod, but from scratch.

BYE

Jack

"Jack" <(E-Mail Removed)> wrote in message
news:bm2fhm$j46$(E-Mail Removed)...
> Hi there
>
> I want to improve my pic quality on my 9700
> by modding the vga output electroncs
> Does anybody have any schematics or examples how to do that.
> I want to make a BNC mod for RGBHV output getting the signal as close from
> the chip as possible.
> I don`t want to use an adon card or premod, but from scratch.
>
> BYE
>
> Jack
>

Assuming that you are not trying to bypass anything between
"the chip" and the VGA connector, why not take each signal
pair from the back of the connector? Again, that's assuming
you don't want to use a pigtail/breakout adapter?

I dought that you well see any percivable improvement in
"pic quality" just from "better" cableing. If you have equip.
that can improve upon a monitor's display and only accepts
separate inputs then you could just use an adapter.

One valid reason for such an action would a long run thru
a noisy environment, like to a remote projection sys.

Luck;
Ken