Hi,

Yes, you read that correctly. This is about a 5.25" floppy drive - namely
getting one to work. (I know! I know! Don't say it!!)

I need to add a 5.25" drive to my Win XP Pro system. I have installed the
drive and new cable to handle both this and the 3.5" drive but without
success. The BIOS does provide an option for a 5.25" floppy. The 3.5"
works fine, but when I try to add the 5.25" (any configuration on the
cable), neither drive works.

Any ideas?

Thanks,
Olen

Olen R. Pearson wrote:

> Hi,
>
> Yes, you read that correctly. This is about a 5.25" floppy drive - namely
> getting one to work. (I know! I know! Don't say it!!)
>
> I need to add a 5.25" drive to my Win XP Pro system. I have installed the
> drive and new cable to handle both this and the 3.5" drive but without
> success. The BIOS does provide an option for a 5.25" floppy. The 3.5"
> works fine, but when I try to add the 5.25" (any configuration on the
> cable), neither drive works.
>
> Any ideas?
>
> Thanks,
> Olen
>
>

There are several things to remember and check when installing
multiple floppy disk drives. First, the FDD at the end of the
cable id always Drive A whilst the FDD in the middle is Drive B.
Knowing this, match the bios setup accordingly. Third, know where
is Pin 1 in either FDD and at the motherboard connector. If one
of the FDD's show a persistent active light, then one of the 3
cable connectors is wrong. And, finally, do not assume that the
existing 5.25" FDD is even working, especially if it has been in
storage for some time.

XP may not support the old drive, may need 3rd party
drivers.
VM Back
This is a virtual floppy drive for Windows NT / 2000 /
XP (works also on 2003 ... Now you can specify either 3.5"
or 5.25" for 640KB, 720KB and 1.2MB media. ...
chitchat.at.infoseek.co.jp/vmware/vfd.html - 16k -
Cached - Similar pages

How To Getting Floppy Drive Type Information
devType) { case 0: // 5.25 360K floppy case 1: // 5.25
1.2MB floppy dwRc ... Microsoft Windows 2000 Standard
Edition. Microsoft Windows XP Professional ...
support.microsoft.com/kb/163920 - Similar pages

Floppy Disk is Not Accessible, Not Formatted, or Not
Recognized by ...
DiskProbe (Dskprobe.exe) is included with the Windows
Support Tools for Windows XP Professional and Windows XP
64-Bit Edition, the Windows 2000 Support ...
support.microsoft.com/kb/140060 - Similar pages
[ More results from support.microsoft.com ]

eBay - Want It Now Post - 5.25 floppy drive w 1.2 MB
capacity ...
eBay - Want It Now Post - 5.25 floppy drive w 1.2 MB
capacity - 300055821775. ... A older floppy disk reader that
will work with Windows XP or Windows 2000. ...
wantitnow.ebay.com/5-25-floppy-drive-w-1-2-MB-capacity_W0QQadidZ300055821775
- 39k - Cached - Similar pages

Wanted 5.25" floppy drive - The Vintage Computer Forums
I have a 1.2MB 5.25" drive connected to my Pentium 4,
I haven't yet seen a BIOS that ... Also worth noting is that
Windows XP and 2000 don't seem to support ...
http://www.vintage-computer.com/vcfo...ad.php?p=35951
- 60k - Cached - Similar pages



"GHalleck" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
|
| Olen R. Pearson wrote:
|
| > Hi,
| >
| > Yes, you read that correctly. This is about a 5.25"
floppy drive - namely
| > getting one to work. (I know! I know! Don't say it!!)
| >
| > I need to add a 5.25" drive to my Win XP Pro system. I
have installed the
| > drive and new cable to handle both this and the 3.5"
drive but without
| > success. The BIOS does provide an option for a 5.25"
floppy. The 3.5"
| > works fine, but when I try to add the 5.25" (any
configuration on the
| > cable), neither drive works.
| >
| > Any ideas?
| >
| > Thanks,
| > Olen
| >
| >
|
| There are several things to remember and check when
installing
| multiple floppy disk drives. First, the FDD at the end of
the
| cable id always Drive A whilst the FDD in the middle is
Drive B.
| Knowing this, match the bios setup accordingly. Third,
know where
| is Pin 1 in either FDD and at the motherboard connector.
If one
| of the FDD's show a persistent active light, then one of
the 3
| cable connectors is wrong. And, finally, do not assume
that the
| existing 5.25" FDD is even working, especially if it has
been in
| storage for some time.

Try it with only the 5.25" drive connected.

On Sat, 27 Jan 2007 21:20:45 -0500, "Olen R. Pearson"
<(E-Mail Removed)> wrote:

>Hi,
>
>Yes, you read that correctly. This is about a 5.25" floppy drive - namely
>getting one to work. (I know! I know! Don't say it!!)
>
>I need to add a 5.25" drive to my Win XP Pro system. I have installed the
>drive and new cable to handle both this and the 3.5" drive but without
>success. The BIOS does provide an option for a 5.25" floppy. The 3.5"
>works fine, but when I try to add the 5.25" (any configuration on the
>cable), neither drive works.
>
>Any ideas?
>
>Thanks,
>Olen
>

"Jim Macklin" <p51mustang[threeX12]@xxxhotmail.calm> wrote in message
news:(E-Mail Removed)...
> XP may not support the old drive, may need 3rd party
> drivers.
> VM Back


<snip>

I have an XP machine with a 3.5" and 5.25" floppy...
both work fine and I did not have to do anything other than enable the B
drive in the bios.
It's simply a matter of getting the cables right.

The drive at the end of the cable (the cable must have a "twist" in it)
is the A: drive
The drive closest to the mobo is the B: drive.

IIRC some of the 5.25" drives had jumpers that designated A or B...
but it's been a while since I fooled with that

> Try it with only the 5.25" drive connected.

That's what I'd also do just to make sure the parts actually work. Then add
the 3¼ drive.

In the end, it might be easier to dig up an old 386 that has both drives and
transfer from big disks to small disks with xcopy. BTDT...

-John O

"Olen R. Pearson" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi,
>
> Yes, you read that correctly. This is about a 5.25" floppy drive -
> namely getting one to work. (I know! I know! Don't say it!!)
>
> I need to add a 5.25" drive to my Win XP Pro system. I have installed
> the drive and new cable to handle both this and the 3.5" drive but
> without success. The BIOS does provide an option for a 5.25" floppy.
> The 3.5" works fine, but when I try to add the 5.25" (any
> configuration on the cable), neither drive works.

Some Intel Mainboards will not support 2 floppy drives.