I have a 3ware card with 3 hard drives connected to it. It
was running fine till a few hours ago, when I had to reinstall
windows. Now the 3-ware card command line interface shows that
my card is installed and working fine with the disks. The BIOS
successfully loads, but Windows does not show me the drive

The device manager shows that the driver is perfectly installed
and says its working properly! I installed the latest drivers from
3-ware site.

Anyone knows how i could tell windows to map it to a drive?

Thanks a lot for your help,
--Elijah

Right click on My Computer and select Manage. On the following screen,
click on Disk Management. You need to assign drive letters to the drives
before they will show up in Windows Explorer. (You also need to have them
partitioned and formatted as well, but since you say it was running fine
before, I presume that is already done!)

--
Cari
MS-MVP Windows Technologies - Printing/Imaging/Hardware
www.coribright.com

"Elijah Bailey" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>I have a 3ware card with 3 hard drives connected to it. It
> was running fine till a few hours ago, when I had to reinstall
> windows. Now the 3-ware card command line interface shows that
> my card is installed and working fine with the disks. The BIOS
> successfully loads, but Windows does not show me the drive
>
> The device manager shows that the driver is perfectly installed
> and says its working properly! I installed the latest drivers from
> 3-ware site.
>
> Anyone knows how i could tell windows to map it to a drive?
>
> Thanks a lot for your help,
> --Elijah