See if it works first. If yes, then connect the CD to Secondary slave.
"mikebon" <(E-Mail Removed)> wrote in message
news:E48DC190-688F-4B83-9DDF-(E-Mail Removed)...
> The one that was in there already is 30GB. If I change it to the
secondary as master, do I then move the cd to primary slave?
>
> "Rich Barry" wrote:
>
> > Try installing it on the Secondary IDE channel as Master. What is
the
> > Capacity of the newer hard drive?
> > "mikebon" <(E-Mail Removed)> wrote in message
> > news:3294EA23-9F5A-4D13-8798-(E-Mail Removed)...
> > > Posted: Fri Jul 16, 2004 4:53 pm Post subject: 2nd hard drive/old
> > >
> >
> --------------------------------------------------------------------------
> > ------
> > >
> > > I recently upgraded my TIVO system by putting a larger hard drive in.
> > Since I had the HD that I had taken out sitting around, I decided to put
it
> > into my PC. It is a 40 GB Maxtor. I put it in setting jumpers correctly,
> > etc. and all is well with the exception of it shows a total capacity of
9MB.
> > Any ideas?
> > >
> >
> >
> >
|
