How do I load an OS to a 250 gig hard drive, is there anything special I
need to do? I had a 36 gig SATA drive in its place working fine, pulled it
out to use a 250 SATA drive, and now I can't get it to load. I have done
all the driver loads during set up, it just comes up with an error every
time. Any help?

Craig

First thing to check - does your BIOS see the full 250Gb?

"Craig" <mapsliame2004-(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> How do I load an OS to a 250 gig hard drive, is there anything special I
> need to do? I had a 36 gig SATA drive in its place working fine, pulled
> it out to use a 250 SATA drive, and now I can't get it to load. I have
> done all the driver loads during set up, it just comes up with an error
> every time. Any help?
>
> Craig
>

Craig wrote:
> How do I load an OS to a 250 gig hard drive, is there anything special I
> need to do? I had a 36 gig SATA drive in its place working fine, pulled it
> out to use a 250 SATA drive, and now I can't get it to load. I have done
> all the driver loads during set up, it just comes up with an error every
> time. Any help?
>
> Craig
>
>

Did you partition and format the new 250 GB drive?

jimbo

What's the error?


--
Tumppi
Reply to group
=================================================
Most learned on nntp://news.mircosoft.com
Helsinki, Finland (remove _NOSPAM)
(translations from FI/SE not always accurate)
=================================================



"Craig" <mapsliame2004-(E-Mail Removed)> kirjoitti viestissä
news:%(E-Mail Removed)...
> How do I load an OS to a 250 gig hard drive, is there anything special I
> need to do? I had a 36 gig SATA drive in its place working fine, pulled
it
> out to use a 250 SATA drive, and now I can't get it to load. I have done
> all the driver loads during set up, it just comes up with an error every
> time. Any help?
>
> Craig
>
>

Thanks for the input, I finally figured it out. For some reason, I assume
just because of the larger drive than I was using before, I had to enable
the raid function in the bios and set up the single drive as a striping
configuration. Once I did that and nothing else, it worked perfect. before
that, the bios did recognize its entire 250 size, but it just wouldn't
work - I got an error saying "error loading OS". Anyway, problem solved.

Thanks everyone,

Craig



"Thomas Wendell" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> What's the error?
>
>
> --
> Tumppi
> Reply to group
> =================================================
> Most learned on nntp://news.mircosoft.com
> Helsinki, Finland (remove _NOSPAM)
> (translations from FI/SE not always accurate)
> =================================================
>
>
>
> "Craig" <mapsliame2004-(E-Mail Removed)> kirjoitti viestissä
> news:%(E-Mail Removed)...
>> How do I load an OS to a 250 gig hard drive, is there anything special I
>> need to do? I had a 36 gig SATA drive in its place working fine, pulled
> it
>> out to use a 250 SATA drive, and now I can't get it to load. I have done
>> all the driver loads during set up, it just comes up with an error every
>> time. Any help?
>>
>> Craig
>>
>>
>
>