I compared two documents. Under 'Balloons' I selected 'Show All Revisions
Inline'. In Print Layout view and in Print Preview all changes, including
deletions, were displayed as changes (i.e. additions in blue and underlined;
deletions are in blue and strikout font).

The problem occurs when I print it. The printed page properly shows the
addtions in blue, but the deletions are placed in ballons off to the right.
This causes the page to be scalled smaller for the ballons to fit; however
the balloons are cut off at the margin and only half of the ballon is
displayed.

It is my understanding that if you have the 'Show All Revisions Inline'
Balloon Option enabled that it will also print all revisions inline. It
functions the same way printing to several different printer makes/models.

Any help would be apprecaited!!

How odd. It prints fine for me. Insertions and deletions are inline in the
printed document and there are no balloons.

Since you've already tried other printers, does the document print the same
way if you start Word in Safe Mode? Hold Ctrl while starting Word and
continue holding Ctrl until prompted to start in Safe Mode.

Please post all follow-up questions to the newsgroup. Requests for
assistance by email cannot be acknowledged.

~~~~~~~~~~~~~~~
Beth Melton
Microsoft Office MVP

Coauthor of Word 2007 Inside Out:
http://www.microsoft.com/MSPress/boo...x#AboutTheBook

Word FAQ: http://mvps.org/word
TechTrax eZine: http://mousetrax.com/techtrax/
MVP FAQ site: http://mvps.org/

"BrewTrooper" <(E-Mail Removed)> wrote in message
news:58A53D56-91ED-4C28-B62B-(E-Mail Removed)...
>I compared two documents. Under 'Balloons' I selected 'Show All Revisions
> Inline'. In Print Layout view and in Print Preview all changes, including
> deletions, were displayed as changes (i.e. additions in blue and
> underlined;
> deletions are in blue and strikout font).
>
> The problem occurs when I print it. The printed page properly shows the
> addtions in blue, but the deletions are placed in ballons off to the
> right.
> This causes the page to be scalled smaller for the ballons to fit; however
> the balloons are cut off at the margin and only half of the ballon is
> displayed.
>
> It is my understanding that if you have the 'Show All Revisions Inline'
> Balloon Option enabled that it will also print all revisions inline. It
> functions the same way printing to several different printer makes/models.
>
> Any help would be apprecaited!!

Thanks for the help and quick response.

I opened Word in safe mode, opened the document and the first thing I
noticed was that the changed text is now in red instead of blue. The
document also printed fine.

I closed without saving, reopened the document in Word (sans safe mode) and
everything printed fine again. (Text was in red vs. blue this time too.)

I'm not sure what was going on, but it seems to be fixed now. Thank you
again!!

Ken

"Beth Melton" wrote:

> How odd. It prints fine for me. Insertions and deletions are inline in the
> printed document and there are no balloons.
>
> Since you've already tried other printers, does the document print the same
> way if you start Word in Safe Mode? Hold Ctrl while starting Word and
> continue holding Ctrl until prompted to start in Safe Mode.
>
> Please post all follow-up questions to the newsgroup. Requests for
> assistance by email cannot be acknowledged.
>
> ~~~~~~~~~~~~~~~
> Beth Melton
> Microsoft Office MVP
>
> Coauthor of Word 2007 Inside Out:
> http://www.microsoft.com/MSPress/boo...x#AboutTheBook
>
> Word FAQ: http://mvps.org/word
> TechTrax eZine: http://mousetrax.com/techtrax/
> MVP FAQ site: http://mvps.org/
>
> "BrewTrooper" <(E-Mail Removed)> wrote in message
> news:58A53D56-91ED-4C28-B62B-(E-Mail Removed)...
> >I compared two documents. Under 'Balloons' I selected 'Show All Revisions
> > Inline'. In Print Layout view and in Print Preview all changes, including
> > deletions, were displayed as changes (i.e. additions in blue and
> > underlined;
> > deletions are in blue and strikout font).
> >
> > The problem occurs when I print it. The printed page properly shows the
> > addtions in blue, but the deletions are placed in ballons off to the
> > right.
> > This causes the page to be scalled smaller for the ballons to fit; however
> > the balloons are cut off at the margin and only half of the ballon is
> > displayed.
> >
> > It is my understanding that if you have the 'Show All Revisions Inline'
> > Balloon Option enabled that it will also print all revisions inline. It
> > functions the same way printing to several different printer makes/models.
> >
> > Any help would be apprecaited!!
>
>
>

I'm not sure either, it all sounds very strange! But I'm thankful a method
used for troubleshooting turned out to be a cure this time. :-)

Please post all follow-up questions to the newsgroup. Requests for
assistance by email cannot be acknowledged.

~~~~~~~~~~~~~~~
Beth Melton
Microsoft Office MVP

Coauthor of Word 2007 Inside Out:
http://www.microsoft.com/MSPress/boo...x#AboutTheBook

Word FAQ: http://mvps.org/word
TechTrax eZine: http://mousetrax.com/techtrax/
MVP FAQ site: http://mvps.org/

"BrewTrooper" <(E-Mail Removed)> wrote in message
news:9AF0A671-646B-4A07-90A1-(E-Mail Removed)...
> Thanks for the help and quick response.
>
> I opened Word in safe mode, opened the document and the first thing I
> noticed was that the changed text is now in red instead of blue. The
> document also printed fine.
>
> I closed without saving, reopened the document in Word (sans safe mode)
> and
> everything printed fine again. (Text was in red vs. blue this time too.)
>
> I'm not sure what was going on, but it seems to be fixed now. Thank you
> again!!
>
> Ken
>
> "Beth Melton" wrote:
>
>> How odd. It prints fine for me. Insertions and deletions are inline in
>> the
>> printed document and there are no balloons.
>>
>> Since you've already tried other printers, does the document print the
>> same
>> way if you start Word in Safe Mode? Hold Ctrl while starting Word and
>> continue holding Ctrl until prompted to start in Safe Mode.
>>
>> Please post all follow-up questions to the newsgroup. Requests for
>> assistance by email cannot be acknowledged.
>>
>> ~~~~~~~~~~~~~~~
>> Beth Melton
>> Microsoft Office MVP
>>
>> Coauthor of Word 2007 Inside Out:
>> http://www.microsoft.com/MSPress/boo...x#AboutTheBook
>>
>> Word FAQ: http://mvps.org/word
>> TechTrax eZine: http://mousetrax.com/techtrax/
>> MVP FAQ site: http://mvps.org/
>>
>> "BrewTrooper" <(E-Mail Removed)> wrote in message
>> news:58A53D56-91ED-4C28-B62B-(E-Mail Removed)...
>> >I compared two documents. Under 'Balloons' I selected 'Show All
>> >Revisions
>> > Inline'. In Print Layout view and in Print Preview all changes,
>> > including
>> > deletions, were displayed as changes (i.e. additions in blue and
>> > underlined;
>> > deletions are in blue and strikout font).
>> >
>> > The problem occurs when I print it. The printed page properly shows the
>> > addtions in blue, but the deletions are placed in ballons off to the
>> > right.
>> > This causes the page to be scalled smaller for the ballons to fit;
>> > however
>> > the balloons are cut off at the margin and only half of the ballon is
>> > displayed.
>> >
>> > It is my understanding that if you have the 'Show All Revisions Inline'
>> > Balloon Option enabled that it will also print all revisions inline. It
>> > functions the same way printing to several different printer
>> > makes/models.
>> >
>> > Any help would be apprecaited!!
>>
>>
>>