I receved worning
16 bit Windows subsystem
C:\Windows\system32\autoexec.nt
The system file is not suitable for running MS-DOS and
Microsoft Windows applications. choose "CLose" to
terminate the application.
how to fix

Hi

Please see if the following article helps:

"Error Message When You Install or Start an MS-DOS or 16-Bit Windows Based
Program"
http://support.microsoft.com/?kbid=324767

--

Will Denny
MVP - Windows Shell/User
Please reply to the News Groups


"cata" <(E-Mail Removed)> wrote in message
news:450b01c49ef3$26dc4d70$(E-Mail Removed)...
>I receved worning
> 16 bit Windows subsystem
> C:\Windows\system32\autoexec.nt
> The system file is not suitable for running MS-DOS and
> Microsoft Windows applications. choose "CLose" to
> terminate the application.
> how to fix

>-----Original Message-----
>I receved worning
>16 bit Windows subsystem
>C:\Windows\system32\autoexec.nt
>The system file is not suitable for running MS-DOS and
>Microsoft Windows applications. choose "CLose" to
>terminate the application.
>how to fix
>.
>Hello:
Received the same warning 2 days ago...looked up how to
fix it but apparently we need a Windows CD. Since Windows
was installed at time of purchase, I cannot figure out how
to fix the problem. Any suggestions?

On Mon, 20 Sep 2004 09:15:28 -0700, Beth E. wrote:

> Received the same warning 2 days ago...looked up how to
> fix it but apparently we need a Windows CD. Since Windows
> was installed at time of purchase, I cannot figure out how
> to fix the problem. Any suggestions?

If you look at the article that Will posted, it does recommend grabbing
copies of specific files from the XP CD. There is no one set way that OEMs
provide their customers with a means to restore the system. You may or may
not have a CD with the necessary files.

If you received a CD, place it in the drive and use Windows Explorer to
check it for an i386 folder and the files mentioned in the MS Knowledge
Base article. Also check the hard drive for an i386 folder provided for
restore/repair purposes. If unable to find the needed folder or files,
contact your OEM's tech support for further assistance.

--
Sharon F
MS-MVP ~ Windows XP Shell/User

I found at leat 10 i386 files on my system. Unfortunately I was unable to
locate the auto.exec in any one of the folders. Did anyone solve this
problem? If you did, can you give me some assistance please.

"Sharon F" wrote:

> On Mon, 20 Sep 2004 09:15:28 -0700, Beth E. wrote:
>
> > Received the same warning 2 days ago...looked up how to
> > fix it but apparently we need a Windows CD. Since Windows
> > was installed at time of purchase, I cannot figure out how
> > to fix the problem. Any suggestions?
>
> If you look at the article that Will posted, it does recommend grabbing
> copies of specific files from the XP CD. There is no one set way that OEMs
> provide their customers with a means to restore the system. You may or may
> not have a CD with the necessary files.
>
> If you received a CD, place it in the drive and use Windows Explorer to
> check it for an i386 folder and the files mentioned in the MS Knowledge
> Base article. Also check the hard drive for an i386 folder provided for
> restore/repair purposes. If unable to find the needed folder or files,
> contact your OEM's tech support for further assistance.
>
> --
> Sharon F
> MS-MVP ~ Windows XP Shell/User
>

Hi Tremmikkizay,

Have a look at the information here:

MS-DOS or 16-bit Windows-based program Error Message
http://www.kellys-korner-xp.com/xp_m.htm#16bit



Regards,

--
Patti MacLeod
Microsoft MVP - Windows Shell/User

"Tremmikkizay" <(E-Mail Removed)> wrote in message
news:A2F15380-2EC1-4C5D-A3A3-(E-Mail Removed)...
> I found at leat 10 i386 files on my system. Unfortunately I was unable to
> locate the auto.exec in any one of the folders. Did anyone solve this
> problem? If you did, can you give me some assistance please.
>
> "Sharon F" wrote:
>
> > On Mon, 20 Sep 2004 09:15:28 -0700, Beth E. wrote:
> >
> > > Received the same warning 2 days ago...looked up how to
> > > fix it but apparently we need a Windows CD. Since Windows
> > > was installed at time of purchase, I cannot figure out how
> > > to fix the problem. Any suggestions?
> >
> > If you look at the article that Will posted, it does recommend grabbing
> > copies of specific files from the XP CD. There is no one set way that
OEMs
> > provide their customers with a means to restore the system. You may or
may
> > not have a CD with the necessary files.
> >
> > If you received a CD, place it in the drive and use Windows Explorer to
> > check it for an i386 folder and the files mentioned in the MS Knowledge
> > Base article. Also check the hard drive for an i386 folder provided for
> > restore/repair purposes. If unable to find the needed folder or files,
> > contact your OEM's tech support for further assistance.
> >
> > --
> > Sharon F
> > MS-MVP ~ Windows XP Shell/User
> >

Hi,

Create a new autoexec.nt file and save it to the \windows\system32 folder.
Click start/run and type notepad, then click ok. Copy/paste the below code
into it (instead of typing it in to prevent errors), then click file/"save
as". Navigate to the C:\Windows\system32 folder, change the "save as file"
type to "all types" and name the file autoexec.nt, then click save (if
prompted to overwrite the existing one, do so). Reboot when completed.

@echo off
lh %SystemRoot%\system32\mscdexnt.exe
lh %SystemRoot%\system32\redir
lh %SystemRoot%\system32\dosx
SET BLASTER=A220 I5 D1 P330 T3

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Associate Expert - WindowsXP Expert Zone
www.microsoft.com/windowsxp/expertzone
Windows help - www.rickrogers.org

"Tremmikkizay" <(E-Mail Removed)> wrote in message
news:A2F15380-2EC1-4C5D-A3A3-(E-Mail Removed)...
>I found at leat 10 i386 files on my system. Unfortunately I was unable to
> locate the auto.exec in any one of the folders. Did anyone solve this
> problem? If you did, can you give me some assistance please.
>
> "Sharon F" wrote:
>
>> On Mon, 20 Sep 2004 09:15:28 -0700, Beth E. wrote:
>>
>> > Received the same warning 2 days ago...looked up how to
>> > fix it but apparently we need a Windows CD. Since Windows
>> > was installed at time of purchase, I cannot figure out how
>> > to fix the problem. Any suggestions?
>>
>> If you look at the article that Will posted, it does recommend grabbing
>> copies of specific files from the XP CD. There is no one set way that
>> OEMs
>> provide their customers with a means to restore the system. You may or
>> may
>> not have a CD with the necessary files.
>>
>> If you received a CD, place it in the drive and use Windows Explorer to
>> check it for an i386 folder and the files mentioned in the MS Knowledge
>> Base article. Also check the hard drive for an i386 folder provided for
>> restore/repair purposes. If unable to find the needed folder or files,
>> contact your OEM's tech support for further assistance.
>>
>> --
>> Sharon F
>> MS-MVP ~ Windows XP Shell/User
>>

"Tremmikkizay" <(E-Mail Removed)> wrote in
message news:A2F15380-2EC1-4C5D-A3A3-(E-Mail Removed)
> I found at leat 10 i386 files on my system. Unfortunately I was
> unable to locate the auto.exec in any one of the folders. Did anyone
> solve this problem? If you did, can you give me some assistance
> please.
>
> "Sharon F" wrote:
>
>> On Mon, 20 Sep 2004 09:15:28 -0700, Beth E. wrote:
>>
>>> Received the same warning 2 days ago...looked up how to
>>> fix it but apparently we need a Windows CD. Since Windows
>>> was installed at time of purchase, I cannot figure out how
>>> to fix the problem. Any suggestions?
>>
>> If you look at the article that Will posted, it does recommend
>> grabbing copies of specific files from the XP CD. There is no one
>> set way that OEMs provide their customers with a means to restore
>> the system. You may or may not have a CD with the necessary files.
>>
>> If you received a CD, place it in the drive and use Windows Explorer
>> to check it for an i386 folder and the files mentioned in the MS
>> Knowledge Base article. Also check the hard drive for an i386 folder
>> provided for restore/repair purposes. If unable to find the needed
>> folder or files, contact your OEM's tech support for further
>> assistance.
>>
>> --
>> Sharon F
>> MS-MVP ~ Windows XP Shell/User

Did you look in C:\Windows\repair ?

--
Frank Saunders, MS-MVP, IE/OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com./athome/sec...t/default.aspx

"cata" wrote:

> I receved worning
> 16 bit Windows subsystem
> C:\Windows\system32\autoexec.nt
> The system file is not suitable for running MS-DOS and
> Microsoft Windows applications. choose "CLose" to
> terminate the application.
> how to fix
>

Hi,

The simplest method to resolve this common problem is to copy autoexec.nt
from C:\Windows\repair to C:\Windows\system32 and overwrite the one that is
currently there.

Alternately, you can create a new autoexec.nt file and save it to the
\windows\system32 folder to overwrite the corrupted one. Click start/run and
type notepad, then click ok. Copy/paste the below code into it (instead of
typing it in to prevent errors), then click file/"save as". Navigate to the
C:\Windows\system32 folder, change the "save as file" type to "all types"
and name the file autoexec.nt, then click save (if prompted to overwrite the
existing one, do so).

@echo off
lh %SystemRoot%\system32\mscdexnt.exe
lh %SystemRoot%\system32\redir
lh %SystemRoot%\system32\dosx
SET BLASTER=A220 I5 D1 P330 T3

Reboot when finished. This usually fixes it, but you will find further steps
here if it doesn't:

Error message when you install or start an MS-DOS or 16-bit Windows-based
program
http://support.microsoft.com/?kbid=324767

Basically, you will have to expand new copies of command.com, autoexec.nt,
and config.nt to the system32 folder from the WinXP CD or I386 folder on
your hard drive. Sometimes, you need to create new ones and overwrite the
existing ones - the method is described in the article.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Associate Expert - WindowsXP Expert Zone
www.microsoft.com/windowsxp/expertzone
Windows help - www.rickrogers.org

"how do i fyx it" <how do i fyx (E-Mail Removed)> wrote in
message news:2A283C4D-A467-449C-94C2-(E-Mail Removed)...
>
>
> "cata" wrote:
>
>> I receved worning
>> 16 bit Windows subsystem
>> C:\Windows\system32\autoexec.nt
>> The system file is not suitable for running MS-DOS and
>> Microsoft Windows applications. choose "CLose" to
>> terminate the application.
>> how to fix
>>